Sharp AR-C330 Key operators User manual

Parts marked with “ ” are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
SERVICE MANUAL
CONTENTS
CODE: 00ZARC330/F1E
DIGITAL FULL COLOR
COPYING MACHINE
MODEL AR-C330
[1] CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[2] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
[3] CONSUMABLE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
[4] SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
[5] EXTERNAL VIEW AND INTERNAL STRUCTURE . . . . . . . . . . . . 5-1
[6] MACHINE OPERATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
[7] SETTING AND ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
[8] SIMULATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[9] USER PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
[10] SELF DIAG MESSAGE AND TROUBLESHOOTING . . . . . . . . . 10-1
[11] MAINTENANCE AND DISASSEMBLY/ASSEMBLY . . . . . . . . . . 11-1
[12] BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
[13] ACTUAL WIRING CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
[14] OTHERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1

CONTENTS
[1] CONFIGURATION
1. Main unit and option lineup . . . . . . . . . . . . . . . . . . . . . 1-1
2. Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
[2] SPECIFICATIONS
1. Basic specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2. Operating specifications . . . . . . . . . . . . . . . . . . . . . . . 2-1
A. Common operations . . . . . . . . . . . . . . . . . . . . . . . . 2-1
B. Copy mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
3. Engine specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
A. Operation (display/operation) section. . . . . . . . . . . 2-6
B. Paper feeding, paper conveyance,
and discharge section . . . . . . . . . . . . . . . . . . . . . . 2-6
C. Scanner section (read) . . . . . . . . . . . . . . . . . . . . . . 2-7
D. Scanner section (write). . . . . . . . . . . . . . . . . . . . . . 2-7
E. Image processing section. . . . . . . . . . . . . . . . . . . . 2-7
F. Fuser section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
G. Drive section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
H. Engine controller . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
I. Image processing controller . . . . . . . . . . . . . . . . . . 2-9
J. Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
K. Power source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
4. Safety and environmental protection standards . . . . . 2-9
A. Safety standards . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
B. Environmental standards . . . . . . . . . . . . . . . . . . . . 2-9
5. Ambient conditions . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
A. Space required . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
B. Operating ambient conditions. . . . . . . . . . . . . . . . 2-10
C. Ambient storage conditions . . . . . . . . . . . . . . . . . 2-10
D. Ambient conditions for transporting . . . . . . . . . . . 2-10
E. Standard temperature and humidity. . . . . . . . . . . 2-10
[3] CONSUMABLE PARTS
1. Consumable parts list . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
2. Compatibility of Supplies for AR-C150/C250/C160/
C270/C330 (Overseas) . . . . . . . . . . . . . . . . . . . . . . . . 3-3
3. Photoconductor, developer, toner . . . . . . . . . . . . . . . . 3-4
A. Serial number identification . . . . . . . . . . . . . . . . . . 3-4
4. Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
5. Environmental conditions. . . . . . . . . . . . . . . . . . . . . . . 3-5
[4] SETUP
1. Installing (using) environment check . . . . . . . . . . . . . . 4-1
2. Transport and installation . . . . . . . . . . . . . . . . . . . . . . 4-2
3. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
A. Unpacking procedures . . . . . . . . . . . . . . . . . . . . . . 4-2
B. Consumable parts required for setup. . . . . . . . . . . 4-3
C. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
4. Lock release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
A. External fitting section . . . . . . . . . . . . . . . . . . . . . . 4-5
B. Scanner section . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
C. Transfer section . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
D. Fusing and paper exit section . . . . . . . . . . . . . . . . 4-7
E. Paper feed, paper transport section. . . . . . . . . . . . 4-7
5. Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
A. Main charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
B. Document table . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
6. Consumable parts setup . . . . . . . . . . . . . . . . . . . . . . . 4-8
A. Fusing oil setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
B. Developer setup. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
C. Toner setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
D. Paper setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
7. Parts setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
8. Copy quality check . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
9. Specification setup . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
10. Function and operation check . . . . . . . . . . . . . . . . . . 4-14
11. Recording of setup and adjustment data. . . . . . . . . . 4-14
12. Procedures for transit . . . . . . . . . . . . . . . . . . . . . . . . 4-14
[5] EXTERNAL VIEW AND INTERNAL STRUCTURE
1. External view and operation parts . . . . . . . . . . . . . . . . 5-1
2. Internal operation parts . . . . . . . . . . . . . . . . . . . . . . . . 5-2
3. Operation panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
4. Touch panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
5. Internal parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
6. Functional parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23
[6] MACHINE OPERATIONS
1. Operation mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
2. Operation menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
3. Pre-heat mode and sleep mode operations . . . . . . . . 6-5
A. Operation timing. . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
B. Pre-heat mode and sleep mode operations . . . . . . 6-5
4. Consumable parts life and machine operation . . . . . . 6-7

qPARTS GUIDE
CONTENTS
Parts marked with "!" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION This document has been published to be us ed
for after sales service only.
The contents are subject to change without notice.
CODE :00ZARC330/P1E
DIGITAL FULL COLOR COPIER
MODEL AR-C330
1Exteriors
2Document size sensor unit
3Original cover
4Operation panel unit
5Optical unit 1
6Optical unit 2
7Copy lamp unit
82nd,3rd mirror holder unit
9Transfer belt out side unit 1
FTransfer belt out side unit 2
GTransfer belt middle unit
HTransfer belt inner unit
IMain frame section
JRear frame 1
KRear frame 2
LDrum unit
MHopper unit 1
NHopper unit 2
OFusing unit 1
PFusing unit 2
QWaste toner transport unit etc.
RDrum drive unit
SPaper feeding drive unit
TPF Joint drive unit
UProcess unit
VRight door upper unit
WRight door lower unit
XVertical transport upper unit
YVertical transport lower unit
ZDelivery paper lower unit
[DV unit
Multi manual paper feeding unit
]Multi tray unit
^Tray unit
_Tray paper feeding unit
`Transfer holder unit
aWaste toner tank unit.etc
bMC unit
cICU PWB fixing Ass'y
dADU unit 1
eADU unit 2
fADU unit 3
gPacking material & Accessories
hPCU main PWB unit
iPCU sub PWB unit
jOperation control PWB unit
kICU main PWB unit
lICU IMG unit
mICU SCN PWB unit
nOP PWB R unit
oOP PWB L unit
pScanner motor PWB unit
qConnector PWB
rAC main PWB unit 100V
sAC sub PWB unit 100V
tEnergy star relay PWB
uPower supply PWB 100V series
■index

– 1 –
DEFINITION
The definition of each Rank is as follows and also noted in the list
Rank A : Maintenance parts, and consumable parts which are not included in but closely related to maintenance parts
Rank B : Performance/function parts (sensors, clutches, and other electrical parts), consumable parts
Rank E : Unit parts including PWB
Rank D : Preparation parts (External fitting, packing, parts packed together)
Rank C : Parts other than the above (excluding sub components of PWB)
Because part s m arked w ith " !" is indispensable fo r the machine s afety m aintenance a nd o peration, it must be replaced w ith
the parts specific to the product specification.
FOther than this Parts Guide, please refer to documents Service Manual(including Circuit Diagram)of this model.
FPlease use the 13 digit code described in the right hand corner of front cover of the document, when you place an order.
FFor U.S. only-Use order codes provided in advertising literature. Do not order from parts department.
1Exteriors
NO. PARTS CODE PRICE
RANK
NEW
MARK
PART
RANK DESCRIPTION
1CCAB-0921FC36 BB N D Upper cabinet rear unit
2XHBSE40P08000 AA C Screw(4×8)
3GCAB-0977FCZZ AY D Rear cabinet upper
4GCAB-0919FCZ2 AX D Rear cabinet
5CFIX-0517FC13 AN C Table glass fixing plate left
6CGLSP0094FC02 AS B Shading glass
7LFIX-0516FCZ1 AH C Table glass fixing plate right
8XBTSE40P04000 AA C Screw(4×4)
9GCAB-0917FCZ1 AV D Upper cabinet right
10 GCAB-0923FCZ4 BB D Right cabinet upper
11 GCAB-0913FCZ1 AW D Right cabinet lower R
12 GCAB-0914FCZ1 AN D Right cabinet lower
13 GCAB-0912FCZ1 AS D Right cabinet lower F
14 CCAB-0910FC32 BF D Front cabinet lower unit
17 LPIN-0277FCZZ AB C Slide pin
18 LHLDW1152FCZZ AC C Bush
19 MHNG-0204FCZ1 AD C Front cab inet hinge L
20 MHNG-0205FCZZ AH C Front cab inet hinge R
21 LX-BZ0892FCZZ AB C Screw(4×10)
23 CCAB-0916FC34 BE D Left cabinet lower unit
24 GCAB-0915FCZ3 BB D Left cabinet upper
25 GCAB-0918FCZ1 AV D Upper cabinet left
27 PGLSP0074FCZZ BA B Table glass
28 LPLTM2573FCZ1 AD C MG Plate
29 XBSSE30P10000 AA C Screw(3×10)
30 CPNLC0258FC51 CL N E Operation panel unit
32 PFTA-0134FCZZ AF C Connector cover A
33 XHBSE30P06000 AA C Screw(3×6)
34 LBNDZ0074FCZ2 AE C Front cabinet band R
35 LBNDZ0074FCZ3 AE C Front cabinet band L
43 TLABS4306FCZZ AC D Noise label
45 TCAUH1028FCZZ AC D Service caution label
46 LSTPG0351FCZZ AF C Front cab inet stopper
47 XEBSD30P14000 AA C Screw(3×14)
48 TCAUH1040FCZZ AC D Copy lamp caution label
49 PCO P1266FCGZ AH C Rear cabinet cover
50 XHBSE30P08000 AA C Screw(3×8)
51 PSPAF1422FCZZ AA C Spacer
52 PCO P0941FCZ1 AC C Top cabinet rear cover L
53 PCO P0911FCZ1 AC C Top cabinet rear cover R
55 PCO P1472FCZ1 AU C Waste toner cover
57 LX-BZ0896FCZZ AC C Screw
58 GCAB-0978FCZZ AL D Rear cabinet cover upper
59 GCAB-0979FCZZ AL D Rear cabinet cover lower
60 LSTYM0246FCZ1 AM C Handle stay
62 PFTA-0135FCZZ AE C Connector cover B
63 CCAB-0978FC31 BA D Rear cabinet upper unit
64 PSHEP5005FCZZ AF C Edge protect sheet
65 TLABF2705FCZZ AB D FCC label
66 LX-NZ0095FCZZ AC C Speed nut

– 2 –
1Exteriors
FCP07561
28
29
29
28
32
33
60
33
58
33
59
57 57
2
63
64
19
30
20
2
17
1
2
3
4
27
7
8
9
10 11
12
13
14
18
23
24
25
22
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
88
5
2
8
2
2
6
21 17
34
45
48 53
52
2
50
49
46
47
51
55
62
33
33
62
35
66
65
43