Sharp SD-CX1H User manual

– 1 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
This Quick Guide will help you to correctly
install and operate your system.
SD-CX1H
1-BIT DIGITAL AUDIO SYSTEM
If you require any advice or assistance re-
garding your Sharp product, please visit
our web-site www.sharp.co.uk/support.
Customers without internet access may
telephone [phone] during office
hours (or [phone] if telephoning from
Ireland).
Accessories
Non-slip sheet
for speakers × 8
“AA” size battery
(UM/SUM-3, R6, HP-7 or similar) × 2 Remote control × 1 FM aerial × 1
Speaker wire × 2
1 2 3
Battery installation of remote control
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Open the Insert the batteries Close the
battery cover. as shown. battery cover.
1
1
2
2
TINSE0353AWZZ A0012.YT
AM loop aerial × 1
AC power lead × 1

– 3 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
– 2 –
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
System Connections
3
3
Wall socket
(AC 230V, 50 Hz)
FM aerial
Left speaker
Right speaker
To the line
output sockets
RCA lead
(Not supplied)
VCR, DVD, etc.
TV
Left speaker
Clear
Black line
Right speaker
AM loop aerial
Adhere the non-slip
sheets to the bottom
of the speaker.
Adhere the non-slip sheets on
the lower back of the speaker,
and then mount it to the wall.
How to apply non-slip sheet

– 5 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
– 4 –
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Listening to a MiniDisc
1Press the CD HH
HH
Hbutton.
2Press the CD 77
77
7 button to open the CD cover.
3Set the CD and press the CD 77
77
7 button.
4Press the CD 0606
0606
06 button to start playback.
Listening to a CD
Total number of tracks
Turn on your System
The first time the unit is plugged in,
the unit will enter the demonstration
mode.You will see words scroll.
2
1
Press the AUX (DEMO)
button to cancel the
demonstration mode.
Press the ON/STAND-
BY button to turn the
power on.
4
4
Total playing time
Disc name Total number of
tracks Total playing time
1Open the control panel cover.
Control panel cover
2Press the MD HH
HH
Hbutton.
3Load a MiniDisc into the MD compartment, label side up.
4Press the MD 0606
0606
06 button to start playback.
Label side facing you.
Label side up.

– 6 –
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
■If trouble occurs (reset)
When this product is subjected to strong external interference (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
Unplug the power lead from the AC socket.Then, plug it in again and retry the operation.
■Before transporting the unit
Remove the CD and MD from the unit.Your unit
checks whether there are any discs inside. "CD
NO DISC" and "MD NO DISC" appear if no disc is
inside. Then, set the unit to the power stand-by
mode. Carrying the unit with discs left inside can
damage it.
1Press theTUNER (BAND) button repeatedly to select the desired frequency
band (FM STEREO, FM or AM).
2Press theTUNING (XX
XX
Xor WW
WW
W) button to tune in to the desired station.
●When the TUNING (Xor W) button is pressed for more than 0.5 seconds, scanning will
start automatically and the tuner will stop at the first receivable broadcast station.
3To receive an FM stereo transmission, press the TUNER (BAND) button.
The“STEREO” indicator lights up.
●“ST” will appear when an FM broadcast is in stereo.
Listening to the Radio