Show Tec Spectral 300 Q4 User manual

Spectral 300 Q4
ORDERCODE 43527
Highlite International B.V.
Vestastraat 2
6468 EX Kerkrade
The Netherlands
Phone: [phone]

Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec Spectral 300 Q4 brings excitement to any venue.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: [e-mail]
You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!

1
Showtec
Showtec Spectral 300 Q4 ™Product Guide
Warning ...............................................................................................................................................................................2
Safety Instructions .........................................................................................................................................................2
Operating Determinations ..........................................................................................................................................4
Rigging ............................................................................................................................................................................4
Return Procedure..........................................................................................................................................................5
Claims..............................................................................................................................................................................5
Description of the device.................................................................................................................................................6
Overview ........................................................................................................................................................................6
Backside .........................................................................................................................................................................7
Installation...........................................................................................................................................................................7
Set Up and Operation .......................................................................................................................................................7
Control Modes...............................................................................................................................................................8
One Spectral (Built-in Auto Programs) .................................................................................................................8
One Spectral (Manual Control).............................................................................................................................8
Multiple Spectrals (Master/Slave control)............................................................................................................8
Multiple Spectrals (DMX Control) ..........................................................................................................................9
Fixture Linking.................................................................................................................................................................9
Data Cabling.................................................................................................................................................................9
Control Panel ...............................................................................................................................................................10
DMX Control Mode.....................................................................................................................................................10
DMX Addressing ..........................................................................................................................................................10
Menu Overview...........................................................................................................................................................11
Main Menu Options....................................................................................................................................................12
1. Static Color Mode..............................................................................................................................................12
2. Auto Run Program..............................................................................................................................................13
3. DMX / Slave Mode.............................................................................................................................................13
4. DMX Address Mode ...........................................................................................................................................13
5. Personality............................................................................................................................................................14
6. Changing the Settings ......................................................................................................................................15
7. Activate Password .............................................................................................................................................16
8. White Settings......................................................................................................................................................16
DMX Channels .............................................................................................................................................................17
9 Channels (Tour) ...................................................................................................................................................17
3 Channels (A1) ......................................................................................................................................................18
4 Channels (A1.d) ..................................................................................................................................................18
4 Channels (A2) ......................................................................................................................................................19
5 Channels (A2.d) ..................................................................................................................................................19
6 Channels (A2.S) ...................................................................................................................................................19
3 Channels (HSV) ....................................................................................................................................................20
Maintenance....................................................................................................................................................................20
Troubleshooting ...............................................................................................................................................................20
No Light.........................................................................................................................................................................20
No Response to DMX..................................................................................................................................................20
Product Specification .....................................................................................................................................................22

2
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
• Spectral 300 Q4 with special powerconnector 0,5m
• Also directly connected XLR IN and XLR OUT 0,5m
• Special powerconnector to powercable 1,5m
• User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. It is estimated that a viable lifespan of 40,000 to 50,000 hours will be achieved
under normal operational conditions. If improving on this lifespan expectancy is of a higher priority, place
care in providing for lower operational temperatures. This may include climatic-environmental and the
reduction of overall projection intensity.
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
Safety Instructions
Every person involved with the installation, operation and maintenance of this device have to:
-be qualified
-follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!

3
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modification to the device.
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never leave any cables lying around.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not open the device and do not modify the device.
Never use the device during thunderstorms, unplug the device immediately.
Never look directly into the light source.
Do not switch the device on and off in short intervals, as this would reduce the system’s life.
Do not shake the device. Avoid brute force when installing or operating the device.
Only use device indoor, avoid contact with water or other liquids.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Avoid flames and do not put close to flammable liquids or gases.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only
handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the power-
cord from time to time.
If the external cable is damaged, it has to be replaced by a qualified technician.
If the lens is obviously damaged, it has to be replaced. So that its functions are not impaired, due
to cracks or deep scratches.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Light effect must be installed out of the reach of children. Never leave the unit
running unattended.
For replacement use fuses of same type and rating only.
The user is responsible for correct positioning and operating of the Spectral 300 Q4. The
manufacturer will not accept liability for damages caused by the misuse or incorrect installation
of this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
CAUTION ! EYEDAMAGES !.
Avoid looking directly into the light source.
(meant especially for epileptics) !

4
Operating Determinations
•This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
•The minimum distance between light-output and the illuminated surface must be more than 0.5 meter.
•The maximum ambient temperature ta= 45°C must never be exceeded.
•The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
•If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
•Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other
safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the Spectral 300 Q4 is lowered from the ceiling or high joists, professional trussing systems have to
be used.
Use a clamp to mount the Spectral 300 Q4, with the mounting-bracket, to the trussing system.
The Spectral 300 Q4 must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net
or safety-cable.
When rigging, derigging or servicing the device, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
The Spectral 300 Q4 can be mounted in a hanging position (Fig. Above) or Upright (Fig. Below), using the
support brackets. Mounting the Spectral 300 Q4 with a clamp or any other mounting bracket is
recommended, depending on the requirements of your application.
The Spectral 300 Q4 can be placed on a flat stage floor or mounted to any kind of truss by a clamp.
Improper installation can cause serious damage to people and property !

5
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
FASE
N
BLUE
BLACK
SILVER
NUL
YELLOW/GREEN
GREEN
GREEN
EARTH
Make sure that the device is always connected properly to the earth!
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
1) Your name
2) Your address
3) Your phone number
4) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

6
Description of the device
Features
The Showtec Spectral 300 Q4 is a light effect with high output and great effects.
•Powersupply: 100-240V multi-voltage
•Compact size
•Peak Power + Continuous Power 18 Watt
•4-in-1 technology, 1x RGBW LED (Red, Green, Blue, White)
•Due to its compact size it is very suitable as truss-warmer and for lighting of smaller objects, etc.
•Powerful light output: Lumens 500+
Lux@2m: 302+
•Drive current: 500/700mA
•Color range: 16.7 million additive RGB colors with full saturation control
•On Board: LCD Display for static color/Auto/Custom control
•Control: Built-in Programs, Manual control, Master/Slave, DMX
•Control protocol: DMX512
•Control personality: Tour (9ch)
A1 (3ch)
A1.D (4ch)
A2 (4ch)
A2.D (5ch)
A2.S (6ch)
HSV (3ch)
•Optical system: Dimmer 0-100%
•Strobe: 0-20Hz
•Beam Angle: 20° degrees
•Housing: Black die cast aluminium
•Lens plate: Tempered glass
•Fixture connection: 3-pin DMX In and 3-pin DMX Out (XLR 3 Pin) Data IN/Data OUT
•IEC input and output for easy power linking (Power in/out)
•Cooling: Convection
•Environment: IP-20
•Dimensions: 160 x 120 x 150 mm (LxWxH)
•Weight: 1,10 kg
1
Overview
2
Fig. 1
1) Mountingbracket with adjustment screw
2) Lens

7
Backside
6b
3
Fig. 2
456 6a
4a 4b
3) LCD Display
4) DMX IN (4b) and OUT (4a) 50cm
5) Menu Buttons
6) Power connector 50 cm (6a) needs to be connected to special 3-pin powerconnector 6b (1,5m)
Sometimes you are not able to enter the main menu of the Spectral 300 Q4.
The display will be blank and when you press the MENU button, the display will show you vertical lines.
This means the Spectral is in Lock Mode.
To unlock the device press: UP + DOWN +UP + DOWN ! and then MENU.
Installation
Remove all packing materials from the Spectral 300 Q4. Check that all foam and plastic padding is
removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply. The device can be music-controlled by its built-in
microphone.

8
Control Modes
There are 4 modes: • Select built-in programs
• Manual Color control
• Master/Slave
• DMX512
One Spectral (Built-in Auto Programs)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. When the Spectral is not connected by a DMX-cable, it functions as a stand-alone device.
Please see page 13 for more information about the built-in programs
One Spectral (Manual Control)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. When the Spectral is not connected by a DMX-cable, it functions as a stand-alone device.
Please see page 12 for more information about the manual control.
Multiple Spectrals (Master/Slave control)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. Use a 3-p XLR cable to connect the Spectral 300 Q4.
The pins:
1. Earth
2. Signal -
3. Signal +
3. Link the units as shown in (Fig. 3), Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
You can use the same functions on the master device as described on page 12 (Built-in Programs, or
Manual control). This means on the master device you can set your desired operation Mode and all
slave devices will react the same as the master device.
Multiple Spectrals (Master/Slave control)
Fig. 3

9
Multiple Spectrals (DMX Control)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. Plug the end of the electric mains power cord into a proper electric power supply socket.
3. Use a 3-p XLR cable to connect the Spectrals.
4. Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket
to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
5. Supply electric power: Plug the end of the mains power cord into proper electric power supply
sockets. Do so for all units and the controller.
Multiple Spectrals Pro Set Up
Max. 30 Spectrals
Fig. 4
Note : Link all DMX cables and set dip switches before connecting electric power
6. Do not supply power before the whole system is set up and connected properly. Design your show
according to your DMX controller functions. See page 12 for more about DMX programming.
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important: Fixtures on a serial data link must be daisy chained in one single line. To comply with the
EIA-485 standard no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of Spectrals on a DMX data link: 30 fixtures
Data Cabling
To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio Certified DMX Data Cables
•DAP Audio Basic microphone cable for allround use. bal. XLR/M 3 p. > XLR/F 3 p.
Ordercode FL01150 (1,5m.), FL013 (3m.), FL016 (6m.), FL0110 (10m.), FL0115 (15m.), FL0120 (20m.).
•DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5m.), FL713 (3m.), FL716 (6m.), FL7110 (10m.).

10
Control Panel
Fig. 5
A. LED Display C. Up Button
B. MENU Button D. Down Button
DMX Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller.
DMX Addressing
The control panel on the front side of the base allows you to assign the DMX fixture address, which is the
first channel from which the Spectral will respond to the controller.
Please note when you use the controller, the unit has max. 9channels.
When using multiple Spectrals, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Spectral should be 1(001); the DMX address of the second
Spectral should be 1+9=10; the DMX address of the third Spectral should be 10+9=19, etc.
Please, be sure that you don’t have any overlapping channels in order to control each Spectral
correctly. If two or more Spectrals are addressed similarly, they will work similarly.
For address settings, please refer to the instructions under ”Addressing’ (menu d001)
Controlling:
After having addressed all Spectrals, you may now start operating these via your lighting controller.
Note: After switching on, the Spectral will automatically detect whether DMX 512 data is received or not.
The problem may be:
•The XLR cable from the controller is not connected with the input of the Spectral.
•The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.

11
Menu Overview

12
Main Menu Options
1. Static Colour
2. Automatic Mode
3. Run Mode (DMX or Slave)
4. DMX Address
5. Personality
6. Settings
7. Password Lock
8. Calibration Menu
Sometimes you are not able to enter the main menu of the Spectral 300 Q4.
The display will be blank and when you press the MENU button, the display will show you vertical lines.
The Spectral is in Lock Mode.
To unlock the device press: UP + DOWN +UP + DOWN !
1. Static Color Mode
1) Press the MENU button on the device, until the display shows .
2) With these menus you can set the Static Color Mode of the Spectral 300 Q4.
3) Use the the UP/Down buttons to change the static colors (Red, Green, Blue, White) or the strobe
speed (0-20Hz).

13
You can combine RED, GREEN, BLUE and WHITE to create an infinite range of colors (0-255).
Red Blue
Set the value of the red LEDs (0-255). Set the value of the blue LEDs (0-255).
Green White
Set the value of the green LEDs (0-255). Set the value of the white LEDs (0-255).
Strobe
Set the value of the flash (0-20Hz).
4) To exit this menu press, use the UP/Down buttons go to and then press the MENU button.
2. Auto Run Program
1) Press the MENU button on the device, until the display shows .
2) With this menu you can set the Auto Mode of the Spectral .
You are not able to adjust the speed of the Auto Programs.
3) Use the UP/Down buttons to change the color.
3. DMX / Slave Mode
1) Press the MENU button on the device, until the display shows .
2) Press MENU to select the mode you want to use.
You can choose 2 modes.
DMX Mode
Slave Mode
Use the MENU button to change between DMX or Slave mode.
3) You can use the same functions on the master device as described on page 12+13 (Static Mode and
Built-in Programs). This means, you can set your desired operation Mode on the master device and all
slave devices will react the same as the master device.
When the fixtures are in Auto program operation, the RUN MODE does not work.
4. DMX Address Mode
1) Press the MENU button on the device, until the display shows .
2) You can choose 512 different DMX addresses.
Use the UP/Down buttons to select the required address from .
.

14
5. Personality
1) Press the MENU button on the device, until the display shows .
2) Enter the PERSONALITY mode to select a DMX mode: TOR, A1, A1.d, A2, A2.d, A2.s, HSV.
TOUR: 9 channels
A1: 3 channels
A1.d: 4 channels
A2: 4 channels
A.2d: 5 channels
A.2s: 6 channels
HSV: 3 channels

15
6. Changing the Settings
1) Press the MENU button on the device, until the display show UPLD.
You can upload the custom programs from the current MASTER device to all SLAVE devices.
In order to activate the upload function the password must be entered.
Password: UP > DOWN > UP > DOWN. Then press ENTER to confirm your password.
When uploading your data, the MASTER and SLAVE units will light up YELLOW.
If an error occurs when uploading, the MASTER and/or SLAVE devices will light up RED.
When uploading one of the custom programs is successful, the MASTER and SLAVE devices will light
up GREEN.
2) In order to reset the custom modes to its default values select REST.
3) In Menu COL you can activate/deactivate the Color Calibration functions.
When you have selected RGB in menu COL, RGB TO WHITE has been set.
This means RGB = 255, 255, 255.
The color displayed, is the specific color you have calibrated in menu CAL RGB.
If you have set a lower value for R, G or B (255, 255, 255), the entire output is also lower.
When COL is set to OFF, RGB = 255,255,255.
The RGB values are not adjusted and the output is the most powerful.
The RGB’s parameters can be adjusted in CAL.
When UC is selected, the RGB output is adjusted to a standard preset universal color.
This way, different versions of the Spectral are color balanced to match each other
4) Enter DIM Mode to select a certain dimmer mode and dimmer speed.
When DIMMER is set to OFF, then RGBW and the MASTER DIMMER are linear.
Dim 1/2/3/4 are speed modes of the non linear dimmer. DIM1 is fastest, and DIM4 is slowest.
The DIM setting does not have any effect in TOUR mode.
5) Enter the DRR Menu to store or blackout a DMX signal.
Menu SAU is to save the last DMX data, in case of a DMX signal error.
Choose Menu BLA to blackout the device in case of a DMX signal error.

16
7. Activate Password
1) Press the MENU button on the device, until the display .
2) Enter the KEY-LOCK mode to select, whether the access password is On or Off.
The Access Password: UP + DOWN + UP + DOWN .
3) Enter the KEY-LOCK mode to select, whether the access password is On or Off.
When you have pressed MENU in menu LOC, use the UP/Down buttons to select ON.
It will take 30 seconds before the Spectral is locked.
When the password is activated, the display will ask for password each time the fixture is powered on.
8. White Settings
1) Press the MENU button on the device, until the display .
2) The display will be blank.
When you press the MENU button, the display will show you vertical lines .

17
3) Press: UP + DOWN +UP + DOWN ! and then press the MENU button to go to the next menu.
4) Enter the menu to select the white colors of a certain color temperature.
There are 11 pre-programmed White colors that can be edited by using RED, GREEN, BLUE and WHITE.
You can adjust the RGBW parameters to make different white colors.
When the new setting is activated, it is possible that the color is not full RGB.
If you have set a lower value for R, G or B (255, 255, 255), the entire output is also lower.
When you choose RGB= 255, 255, 255 on your DMX controller, the white color shown to you, will be
the one you manually made in the Calibration Menu (CAL RGB).
5) To exit this menu press the UP/Down buttons go to and then press the MENU button.
DMX Channels
9 Channels (Tour)
Channel 1 –Master Dimmer
0-255
Brightness from 0 to 100%
Channel 2 –Red
0-255
Red gradual color brightness from 0 to 100%
Channel 3 –Green
0-255
Green gradual color brightness from 0 to 100%
Channel 4 –Blue
0-255
Blue gradual color brightness from 0 to 100%
Channel 5 –White
0-255
White gradual color brightness from 0 to 100%
Channel 6 –Macro Colors
000 –010
No Function
011 –030
Red 100% / Green Up / Blue 0%
031 –050
Red Down / Green 100% / Blue 0%
051 –070
Red 0% / Green 100% / Blue Up
071 –090
Red 0% / Green Down / Blue 100%
091 –110
Red Up / Green 0% / Blue 100%
111 –130
Red 100% / Green 0% / Blue Down
131 –150
Red 100% / Green Up / Blue Up
151 –170
Red Down / Green Down / Blue 100%
171 –200
Red 100% / Green 100% / Blue 100% / White 100%
201 –205
White 1: 3200K
206 –210
White 2: 3400K
211 –215
White 3: 4200K
216 –220
White 4: 4900K
221 –225
White 5: 5600K
226 –230
White 6: 5900K
231 –235
White 7: 6500K
236 –240
White 8: 7200K
241 –245
White 9: 8000K
246 –250
White 10: 8500K
251 –255
White 11: 10000K

18
Channel 7 –Strobe
0-10
No Function
11-255
Strobe effect, from slow to fast (0-20 flashes/sec.)
Channel 8 –Auto Programs
00 –40
No Function
41 –50
Auto 1
51 –60
Auto 2
61 –70
Auto 3
71 –80
Auto 4
81 –90
Auto 5
91 –100
Auto 6
101 –110
Auto 7
111 –120
Auto 8
121 –130
Auto 9
131 –255
Auto 10
Channel 9 –Program Speed
0 –255
Program Speed from slow to fast
3 Channels (A1)
Channel 1 –Red
0-255
Red gradual color brightness from 0 to 100%
Channel 2 –Green
0-255
Green gradual color brightness from 0 to 100%
Channel 3 –Blue
0-255
Blue gradual color brightness from 0 to 100%
4 Channels (A1.d)
Channel 1 –Master Dimmer
0-255
Brightness from 0 to 100%
Channel 2 –Red
0-255
Red gradual color brightness from 0 to 100%
Channel 3 –Green
0-255
Green gradual color brightness from 0 to 100%
Channel 4 –Blue
0-255
Blue gradual color brightness from 0 to 100%