Shure SLX-D User manual

SLX-D
Wireless System
Shure SLX-D Digital Wireless system guide. Includes how to set up receiver, check sound and gain, and see groups and channels.
Version: 5.7 (2024-A)

Shure Incorporated
2/56
Table of Contents
SLX-D Wireless System 4
Overview 4
Features 4
System Components 4
SLX-D Transmitters 4
SLXD4 / SLXD4D Receiver 5
SLXD5 Bodypack Receiver 6
SLXD4 Setup 7
SLXD5 Setup 8
SLXD4 Hardware Callouts 9
SLXD5 Hardware Callouts 11
Navigating the Receiver Menus 13
Transmitters 17
Transmitter Menu Options and Navigation 19
Locking and Unlocking the Receiver Controls 20
Batteries and Chargers 21
Microphone Battery Installation 21
Setting the AA Battery Type 22
Shure SB903 Rechargeable Battery 22
Important Tips for Care and Storage of Shure Recharge
able Batteries 25
Average Charging Times 25
Sound Check and Gain Adjustment 25
SLXD4 26
SLXD5 26
System Set Up 26
Creating Audio Channels 26
What are Groups and Channels? 26
Scan and IR Sync 27
Manual Frequency Selection 27
Using the Guided Frequency Setup 27
Linking Two Transmitters to a Receiver 28
Multi-Mic Mode 28
Adding SLX-D to Other Shure Wireless Systems 30
Radio Frequency (RF) Settings 30
Setting the Transmitter RF Power 30
Networking 30
Connecting to a Network 30
Automatic IP Addressing 30
Configuration Tips 30
Network Troubleshooting 31
Connecting to an External Control System 31
Firmware Updates 31
Updating the Transmitter Firmware 32
Firmware Release Requirements 32
Mount the SLXD4 Receiver in a Rack 32
Installing Footpads 33
Optional Accessories 33
Specifications 37
Receiver Output Connectors 47
Transmitter Input 48
Frequency Range and Transmitter Output Power 48
Frequencies for European Countries 49
Important Safety Information 50
Explanation of Symbols 50
Important Safety Instructions 50
Safety Information for Batteries 51
Safety and Regulatory Information for Battery Chargers 52

Shure Incorporated
3/56
Important Product Regulatory Information 52
Introduction to EMC 52
Regulatory Information for Wireless Products Utilizing TV
Frequency Bands 53
Environmental Regulatory Information 55
Battery Regulatory Information 56
Certifications 56
Energy Efficiency 56
Certification and Compliance Markings 56

Shure Incorporated
4/56
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SLX-D
Wireless System
Overview
SLX-D Digital Wireless delivers clear audio and stable RF performance with easy setup and rechargeability options. SLX-D is
built to handle a wide range of applications, from day-long conferences to nighttime performances.
Automatic channel scan and IR sync are even easier with a guided setup feature programmed into each SLXD wireless re
ceiver. Manage multiple-system group scans and firmware updates with third-party setup and control via Ethernet. Operate up
to 32 compatible systems per 44 MHz band for up to 8 hours from 2 AA batteries, or add Shure SB903 rechargeable batteries
and charger accessories. SLXD provides >118 dB dynamic range and stable, efficient RF transmission for a selection of hand
held, lavalier and headset microphones.
Features
Transparent 24-bit digital audio
Extended 20 Hz to 20 kHz frequency range (microphone dependent)
118 dB dynamic range
Digital predictive switching diversity
44 MHz tuning bandwidth (region dependent)
32 available channels per frequency band (region dependent)
Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
Easy pairing of transmitters and receivers over IR scan and sync
Automatic channel scan
Link multiple receivers for group scan and firmware updates via Ethernet port
Compatible with Shure Wireless Workbench control software
Remote monitoring and control via ShurePlus Channels app
Third-party setup and control via Ethernet
Elegant and easy-to-use interface with high-contrast LCD menu
Guided setup mode installed in each SLX-D receiver
Transmitters use 2 AA batteries or Shure SB903 rechargeable battery
System configurations include handheld transmitters with interchangeable microphone capsules, bodypacks with a range
of lavalier, headset and instrument microphones and single and dual rack-mountable receivers.
System Components
Your SLX-D system is available in multiple configurations of transmitters, receivers, and microphones to meet your specific
needs. For a full list of available system configurations, visit shure.com or contact your local sales rep.
SLX-D Transmitters
①
SLXD1 bodypack (BP) transmitter
®
™

Shure Incorporated
5/56
②
SLXD2 handheld (HH) transmitter
③
SLXD3 plug-on (PO) transmitter
SLXD4 / SLXD4D Receiver
①
Rack mounting hardware
②
¼-wave antennas (2)
③
Power supply
④
1.5V AA batteries (2)
⑤
SLXD4 or SLXD4D receiver

Shure Incorporated
6/56
SLXD5 Bodypack Receiver
①
SLXD5 portable receiver
②
Locking 3.5mm-to-XLR cable (18")
③
Locking 3.5mm audio extender cable (16")
④
1.5V AA batteries (2)
⑤
Standard ¼" thread non-conductive camera shoe adapter
Note: Use this adapter to prevent ground loop noise
⑥
Zippered vinyl bag (black)

Shure Incorporated
7/56
1.
2.
SLXD4 Setup
Attach the included antennas to the back of the receiver.
Connect the power supply to the receiver and plug the cord into an AC power source.

Shure Incorporated
8/56
3.
4.
1.
2.
Connect the audio output to an amplifier or mixer.
Press the power button on the receiver. Use the menu to set the system to microphone (mic) or instrument (line) level
as appropriate.
SLXD5 Setup
With the power switch in the O (off) position, insert the battery or connect the USB-C port on the bottom to a suitable
power source.
Connect the audio output to a camera or recorder.
Note: Set the Audio Out to Dual Mono for 3.5mm devices, or to Balanced (Mono) for XLR devices in the receiver menu.

Shure Incorporated
9/56
3.
◦
Turn on the power by pushing the switch to the I (on) position. Use the menu to set the system to microphone (mic) or
instrument (line) level as appropriate.
SLXD4 Hardware Callouts
①Sync LED
Flashing: IR sync mode is enabled

Shure Incorporated
10/56
◦
◦
◦
Solid: Receiver and transmitter aligned for IR sync
②IR port
Align with the transmitter IR port during an IR sync to program transmitters.
③Display
Shows menu options, receiver and transmitter settings.
④Sync button
Press to activate IR sync.
⑤Exit button
Press to cancel and exit the current operation.
⑥Control knob
Change menu parameters. Push knob to confirm changes.
⑦Power button
Powers receiver on or off.
⑧Power supply port
Connection point for DC power supply.
⑨Ethernet port
For network connection.
Amber LED (network speed):
off = 10 Mbps, on = 100 Mbps
Green LED (network status):
off = no network link, on = network link active
flashing = rate corresponds to traffic volume
⑩XLR audio output
Balanced (1: ground, 2: audio +, 3: audio - )