SI ZERO EDGE PRO User manual

1
Zero Edge Pro
Parts in the Box
INSTALLERS: PLEASE LEAVE THIS MANUAL WITH THE OWNER.

2
(1) Horizontal Frame Bottom with Lights
(1) Horizontal Frame Top with No Lights
(2) Vertical Frames
(2) Horizontal Trims
(2)Vertical Trims
(LED Lights Only)
Installation requires three or more people. The product weighs up to 225 lbs.
Please use safe lifting and rigging techniques.
2+
Frame Assembly Parts
PARTS IN THE BOX – STANDARD FRAME
3/4” Small
Trim Option
1 1/2” Trim Option – Standard
Vertical Support Bar (used only for some
standard frames)
(1 )Material Roll

3
PARTS IN THE BOX – STANDARD FRAME
(2) Wall
Brackets
(4) Mounting
Screws
(4) 1/4-20 x 1/4’’
Screws
(Small Trim Only)
(4) Thin Corner
Brackets with Set
Screws
(4) Thick Corner
Brackets with Set
Screws
1/8’’ & 5/32’’
Hex Keys
Bungees
(Maestro
Only)
(4) Gloves Acrylic Logo Retrot
Channel Nut
(AT Only)
Thumb
Screws
Corner
Alignment Part
(BD & ST Only)
Hardware Kit
(2) Flown
Ceiling Mount
(2) Flown
Cables
LED Remote LED Foam
(2) Flown
Screen Mount
Flying Mount Only
(Purchased Separately)
LED IR Controlled Only
(Purchased Separately)
(4) Corner
Brackets for Trim
Assembly
Mounting
Screws

4
Installation requires three or more people. The product weighs up to 225 lbs.
Please use safe lifting and rigging techniques.
2+
(2) Horizontal Frame Bottom
(2) Horizontal Frame Top
(2) Vertical Frames
(2) Horizontal Trims
(2) Vertical Trims
Frame Assembly Parts
PARTS IN THE BOX – SPLIT FRAME
3/4” Small
Trim Option
1 3/4” Trim Option - Split Frame
(1) Material Roll
Vertical Support Bar (used only for some
Standard frames)

5
PARTS IN THE BOX - SPLIT FRAME
(2) Wall
Brackets
(4) Mounting
Screws
(4) 1/4-20 x 1/4’’
Screws
(Small Trim Only)
(4) Thin Corner
Brackets with Set
Screws
(4) Thick Corner
Brackets with Set
Screws
1/8’’ & 5/32’’
Hex Keys
Bungees
(Maestro
only)
(4) Gloves Acrylic Logo Retrot
Channel Nut
(AT only)
Thumb
Screws
Corner
Alignment Part
(BD & ST only)
Hardware Kit
(2) Flown
Ceiling Mount
(2) Flown
Cables
LED Remote LED Foam
(2) Flown
Screen Mount
Flying Mount Only
(Seperately purchased)
LED IR Controlled Only
(Seperately purchased)
(4) Corner
Brackets for Trim
assembly
Mounting
screws

6

7
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
NOTES
For more technical support questions – Call: 512.832.6939 or email: suppor[email protected]
Hours of Support: 7:30am – 5pm CST | screeninnovations.com
Please visit support.screeninnovations.
com to nd all the updated documents,
drivers and tutorial videos.
Use this QR code to see the video
tutorials for Black Diamond or Short
Throw snap attachment method
Use this QR code to see the
video tutorials for Slate material.

8
Screen Innovations
9715-B Burnet Rd, Suite 400 Austin, TX 78758
512.832.6939
www.screeninnovations.com