Siemens NEB Series User manual

1 / 4
Installation Instructions / Instructivo de Instalación
Item: NEB _ _ _ _ _ _
HEB _ _ _ _ _ _
For Use With Frame EB
Para Usar Con Caja Base EB
1
Use only with Siemens certified components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before powersupplying this deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement depouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before powersupplying this deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement depouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Trip
[ Interrumpir]
Circuit Breaker
Interruptor
Disjoncteur
2 Pole / Polos
2 X
6 - 32 X 2.75 in. [ 70 ]
Frame – EB
Caja Base – EB
2 X
1 Pole / Polos
6 - 32 X 2.75 in. [ 70 ]
Frame – EB
Caja Base – EB
3 Pole / 3 Polos
2 X
6 - 32 X 2.75 in. [ 70 ]
Frame – EB
Caja Base – EB
5 / 32”
807892A05
66A3699H01

2 / 4 807892A05
2 Pole / Polos
2 X 1 Pole / Polos
10 lb. in.
[1.1 Nm]
2 3
10 lb. in.
[1.1 Nm]
43 Pole / Polos
2 X 10 lb. in.
[1.1 Nm]
2 X 10 lb. in.
[1.1 Nm]
2 X 10 lb. in.
[1.1 Nm]

3 / 4 807892A05
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before powersupplying this deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement depouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before powersupplying this deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement depouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
5
5
TRIP
[ INTERRUMPIR ]
CUSTOMER SUPPLIED
[PROVISTO POR CLIENTE]
LINE BUS
[BARRA DE LINEA]
NOTICE:
FOR MOUNTING OF BREAKERS IN EQUIPMENT, REFER TO THE ORIGINAL EQUIPMENT
MANUFACTURER’S REQUIREMENTS AND SPECIFICATIONS.
[PARA EL MONTAJE DE LOS INTERRUPTORES EN EL EQUIPO, REFIERASE A LOS REQUISITOS
Y ESPECIFICACIONES ORIGINALES DEL FABRICANTE DEL EQUIPO]
Option 1
[ Opción 1 ]
6
3TW1EG30
3TA1EG10
3TA1EG30
A
See chart on next
page for torque
[ Ver torque en la tabla
de la pagina siguiente ]
Option 2
[ Opción 2 ]
3X
34 – 38 lb. in.
[ 3.8 – 4.3 Nm ]
5/32”
TNKE1 - 1 Pole / Polos
TNKE2 - 2 Pole / Polos
TNKE3 - 3 Pole / Polos
See chart on next page
[ Ver la tabla en la
pagina siguiente ]

Technical Support: Toll Free: 1-800-964-4114 Internet: www.usa.siemens.com/powerdistribution
4 / 4
Subject to change without prior notice © Siemens Industry, Inc. 2009
Siemens Industry, Inc. , Norcross, GA U.S.A.
37
19
7
3719
19
3719
19
7
35 Lb. in.
[ 4.0 Nm ]
40 Lb. in.
[ 4.5 Nm ]
45 Lb. in.
[ 5.1 Nm ]
50 Lb. in.
[ 5.6 Nm ]
80 Lb. in.
[ 9.0 Nm ]
8 AWG
[ 10 mm² ]
14 -10 AWG
[ 2.5 – 6 mm² ]
0.5”
[ 13mm ]
0.5”
[ 13mm ]
0.5”
[ 13mm ]
1 – 3 / 0 AWG
[ 50 – 95 mm² ]
6 - 4 AWG
[ 16 – 25 mm² ]
3TW1EG30
3TA1EG10
3TA1EG30
Wire Strip
Length
[ Quitar ]
Wire Connector
[ Conexión del
cable ]
Wire Size
[ Rango Cable ]
Torque
[ esfuerzo de
torsión ]
0.5”
[ 13mm ]
0.5”
[ 13mm ]
0.5”
[ 13mm ]
( Cu / Al )
8 AWG
[ 10 mm² ]
14 -10 AWG
[ 2.5 – 6 mm² ]
1 – 1 / 0 AWG
[ 50 mm² ]
6 - 4 AWG
[ 16 – 25 mm² ]
( Cu Only )
( Cu / Al )
6 – 2 AWG
[ 16– 35 mm² ]
35 Lb. in.
[ 4.0 Nm ]
40 Lb. in.
[ 4.5 Nm ]
45 Lb. in.
[ 5.1 Nm ]
50 Lb. in.
[ 5.6 Nm ]
Req. Wire Stranding
[ Hebras ]
UL 486A - 486B
CU
Class
C
CU / AL
Class
B
1 – 3 / 0 AWG
[ 50 – 95 mm² ]
OK
A
STANDARD
15-100A
STANDARD
110-125A
OPTIONAL
3 - 2 AWG
[ 35 mm² ] 50 Lb. in.
[ 5.6 Nm ]
50 Lb. in.
[ 5.6 Nm ]
3 - 2 AWG
[ 35 mm² ]
807892A05
PUSH TO TRIP
[ PRESIONE PARA INTERRUMPIR ]
7ON / I
OFF / O
TRIP
[ INTERRUMPIR ]
RESET
[ RESTABECER ]
Note: If cover must be removed for any
reason, torque cover mounting screws to
6-7 Lb.in. [.68-.79 Nm].
[ Nota: Si la cubierta se debe quitar por
cualquier razón, los tornillos de montaje de
la cubierta requieren esfuerzo de torsión de
6-7 Lb.in. [.68-.79 Nm].
66A3699H01