Siemens FDCI723 User manual

A6V10402143_f_en_-- Building Technologies
2018
-
10
-
03
Control Products and Systems
Cerberus™ PRO
Zone module, external powered
FDCI723
Zone module, external powered, addressed for detector line C
-
NET.
●Detector line (collective or conventional 110 series, DS11, SynoLINE300/600)
●LED indicator for detector line status: fault, test, etc.
●Two-wire installation for all cable types
●DC 24 V power supply, external, tested to EN 54-4 (detector lines electrically
isolated)
●Microprocessor-controlled signal processing
●Communication via C-NET (addressed individually)
●Can be used in dry, dusty, and humid areas
●Different mounting options

2
Building Technologies A6V10402143_f_en_--
Fire Safety 2018-10-03
Properties
Eco-friendly
●Environmentally friendly processing
●Reusable materials
●Electronic parts and synthetic materials can be easily separated
Features
●Transparent housing, ensuring that LED indicators are easy to see
●Protected electronics
●Integrated line separator
●Easy mounting using snap fastener
●Can be used in dry areas
●Housing FDCH221 can be used in dusty and humid environments.
Use
For connecting to collective or conventional fire detectors (with safety barrier SB3 for areas
at risk of explosion).
6
5
2
1
4
3
1 Connections for the C-NET detector line 4 Detector line input connections
Max. 32 detectors per line
2 C-NET detector line 5 Contact input
3 External supply DC 24 V 6 Jumper for activation/deactivation of
ground fault monitoring

3
Building Technologies A6V10402143_f_en_--
Fire Safety 2018-10-03
NOTICE
Country
-
specific safety regulations
Failure to observe country-specific safety regulations can cause injury to persons and
damage to property.
●Observe country-specific regulations and comply with the corresponding safety
directives.
Functions
The detector line parameters can be set for:
●Collective detector line 110 series, DS11, SynoLINE600
or
●Conventional detector line SynoLINE300
or
●Collective detector line DS11, Ex with safety barrier SB3
Detector line is monitored for:
●Quiet, alarm, open line, short-circuit, fault, and ground fault
Status display by means of LED.
Type Overview
Type Designation Order no. Weight [kg]
FDCI723 Zone module, external powered S54322-F6-A1 0.106
Accessories
Type Designation Order no. Weight [kg]
FDCH221 Housing with cover, seal, and screws S54312-F3-A1 0.282
– Metal cable gland M20 x 1.5 A5Q00004478 0.036
– M20 metal counter nut A5Q00004479 0.006
FDCM291 Mounting foot A5Q00003855 0.001
DBZ1190-AB 0.5...2.5 mm2(3-pin) connection terminal BPZ:4942340001 0.001
Product documentation
Document ID Name
A6V10229261 List of compatibility (for 'Cerberus™ PRO' product line)
A6V10414910 Technical manual Zone module, external powered FDCI723
001204 Principles, applications, installation, maintenance Fire alarm signal in areas at risk of
explosion
Related documents such as the environmental declarations, CE declarations, etc., can be
downloaded from the following Internet address:
https://siemens.com/bt/download

4
Building Technologies A6V10402143_f_en_--
Fire Safety 2018-10-03
Notes
Mounting
●Mounting on U-rail TS35 (series mounting)
●In housing FDCH221 with cover, seal, and screws
1
2
3
1 Series mounting using mounting feet supplied, on U-rail TS35
2 Mounting in separate housing FDCH221 (accessory)
3 Use auxiliary terminals DBZ1190-AB (accessory) for shielded cables
Disposal
The device is considered an electronic device for disposal in accordance
with the European Guidelines and may not be disposed of as domestic
garbage.
●Dispose of the device through channels provided for this purpose.
●Comply with all local and currently applicable laws and regulations.

5
Building Technologies A6V10402143_f_en_--
Fire Safety 2018-10-03
Technical data
FDCI723
C-NET operating voltage DC 12…33 V
External power supply
●Operating voltage
Tested to EN 54-4
DC 18...32 V
Collective detector line
●Collective line code (KLK)
●End-of-line (EOL)
32
20 V voltage reference diode or EOL22 (Ex)
Operating temperature -20...+55 °C
Storage temperature -30...+70 °C
Air humidity, non-condensing ≤95 % rel.
Communication protocol C-NET
Pluggable connection terminals 0.2…1.5 mm2
Color
●Input/output module rack, back box
●Cover cap, housing cover
~RAL 9010, pure white
Transparent matt
EN 60529 / IEC 60529 protection category
●Without housing
●With housing FDCH221
IP30
IP65
Standards EN 54-17, EN 54-18
Approvals
●VdS
●LPCB
G215004
-
Compatibility See 'List of compatibility'

6
Building Technologies A6V10402143_f_en_--
Fire Safety 2018-10-03
Issued by
Siemens Switzerland Ltd
Building Technologies Division
International Headquarters
Theilerstrasse 1a
CH-6300 Zug
Tel. [phone]
www.siemens.com/buildingtechnologies
© Siemens Switzerland Ltd, 2015
Technical specifications and availability subject to change without notice.
Document ID A6V10402143_f_en_--
Edition 2018-10-03
Dimensional drawings
Zone module, external powered FDCI723
90
24
1
3
2
102
Housing FDCH221
50
2
0
7
119
0786
Siemens Schweiz AG, Theilerstrasse 1a
CH-6300 Zug
Technical data: see doc. A6V10414910
The declared performance and conformity can be seen in the Declaration of Performance (DoP) and the EU Declaration of Conformity (DoC),
which is obtainable via the Customer Support center: Tel. [phone] or https://siemens.com/bt/download
15
FDCI723 - Input/output device incl. short-circuit isolator for use in fire detection and fire alarm systems installed in buildings.
305/2011/EU (CPR): EN 54-17 / EN 54-18 ; 2014/30/EU (EMC): EN 50130-4 / EN 61000-6-3 ; 2011/65/EU (RoHS): EN 50581
DoP No.: 0786-CPR-21423; DoC No.: CED-FDCI723
FDCI723