Siemens SITRANS FC430 User manual

Operating Instructions
Answers for industry.
05/2015Edition
Coriolis flowmeters
SITRANS FC430 with HART
SITRANS F

SITRANS F
Coriolis Flowmeters
FC430 with HART
Operating Instructions
These Operating Instructions apply to Siemens
products SITRANS FC430 with order codes
comm
encing 7ME4613, 7ME4623 and 7ME4713
05/2015
A5E03361511
-AF
Introduction
1
Safety notes
2
Description
3
Installing/mounting
4
Connecting
5
Commissioning
6
Operating
7
Functions
8
Custody Transfer
9
Alarms and system
messages
10
Service and maintenance
11
Troubleshooting/FAQs
12
Technical data
13
Spare parts/Accessories
14
Dimensions and weight
15
HMI menu structure
A
HART commands
B
Default settings
C
Zero point adjustment
D

Siemens AG
Division Process Industries and Drives
Postfach 48 48
90026 NÜRNBERG
GERMANY
Order number: A5E03361511
Ⓟ
05/2015 Subject to change
Copyright © Siemens AG 2011 - 2015.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury
may
result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified
for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF 3
Table of contents
1 Introduction............................................................................................................................................. 9
1.1 History.......................................................................................................................................9
1.2 Compatibility ...........................................................................................................................10
1.3 Items supplied.........................................................................................................................11
1.4 Checking the consignment .....................................................................................................12
1.5 Device identification................................................................................................................12
1.6 Further Information .................................................................................................................19
2 Safety notes.......................................................................................................................................... 21
2.1 Laws and directives ................................................................................................................21
2.2 Installation in hazardous locations..........................................................................................23
2.3 Certificates ..............................................................................................................................28
3 Description............................................................................................................................................ 29
3.1 Applications.............................................................................................................................29
3.2 System configuration ..............................................................................................................30
3.3 Design.....................................................................................................................................31
3.4 Features..................................................................................................................................35
3.5 HART Communication Interface .............................................................................................37
3.6 Theory of operation.................................................................................................................40
4 Installing/mounting ................................................................................................................................ 41
4.1 Introduction .............................................................................................................................41
4.2 Strong vibrations .....................................................................................................................41
4.3 Transmitter installation............................................................................................................41
4.3.1 Wall mounting .........................................................................................................................42
4.3.2 Pipe mounting .........................................................................................................................42
4.3.3 Mounting the transmitter .........................................................................................................43
4.3.4 Turning the transmitter............................................................................................................43
4.3.5 Turning the local display .........................................................................................................45
4.4 Sensor installation...................................................................................................................46
4.4.1 Installation safety precautions ................................................................................................46
4.4.2 Determining a location ............................................................................................................47
4.4.3 Orientation of the sensor ........................................................................................................48
4.4.4 Mounting the sensor ...............................................................................................................51
4.4.5 Hydrostatic testing ..................................................................................................................53
4.4.6 Mounting a pressure guard.....................................................................................................53
5 Connecting ........................................................................................................................................... 55

Table of contents
FC430 with HART
4Operating Instructions, 05/2015, A5E03361511-AF
5.1 General safety requirements.................................................................................................. 55
5.2 Wiring in hazardous locations................................................................................................ 56
5.3 Cable requirements................................................................................................................ 56
5.4 Safety notes for connecting ................................................................................................... 57
5.5 Step 1: Connecting the DSL and the transmitter ................................................................... 57
5.6 Lack of equipotential bonding ................................................................................................ 61
5.7 Step 2: Preparing for the transmitter connections ................................................................. 61
5.8 Step 3: Connecting the power supply .................................................................................... 66
5.9 Step 4a: Connecting the current output HART (channel 1) ................................................... 68
5.10 Step 4b: Connecting the inputs and outputs (channels 2 to 4).............................................. 69
5.11 Step 5: Finishing the transmitter connection.......................................................................... 72
6 Commissioning ..................................................................................................................................... 73
6.1 General requirements ............................................................................................................ 73
6.2 Warnings ................................................................................................................................ 73
6.3 Commissioning via HMI ......................................................................................................... 74
6.3.1 Wizard introduction ................................................................................................................ 74
6.3.2 Quick Commissioning wizard (menu item 1.1) ...................................................................... 75
6.3.3 Zero point adjustment ............................................................................................................ 76
6.3.4 Zero Point Adjustment wizard (menu item 1.2)...................................................................... 77
6.3.5 Wizards .................................................................................................................................. 78
6.3.5.1 Process Values wizard (menu item 1.3) ................................................................................ 80
6.3.5.2 Inputs/Outputs wizard (menu item 1.4).................................................................................. 81
6.3.5.3 Gas Application wizard (menu item 1.5) ................................................................................ 85
6.3.5.4 Pulsating Flow wizard (menu item 1.6).................................................................................. 86
6.3.5.5 Dosing Application wizard (menu item 1.7) ........................................................................... 87
6.4 Commissioning with PDM ...................................................................................................... 88
6.4.1 Operating via SIMATIC PDM................................................................................................. 88
6.4.2 Functions in SIMATIC PDM ................................................................................................... 88
6.4.3 Initial setup ............................................................................................................................. 89
6.4.4 Adding device to communication network ............................................................................. 91
6.4.5 Configuring a new device....................................................................................................... 92
6.4.6 Wizard - Quick Start via PDM ................................................................................................ 92
6.4.7 Wizard - Zero Point adjustment ........................................................................................... 100
6.4.8 Changing parameter settings using SIMATIC PDM ............................................................ 102
6.4.9 Parameters accessed via drop-down menus....................................................................... 103
6.4.10 Zero point adjustment .......................................................................................................... 105
6.4.11 Process variables................................................................................................................. 107
7 Operating.............................................................................................................................................109
7.1 Local display (HMI) .............................................................................................................. 109
7.1.1 Display view structure .......................................................................................................... 110
7.1.2 Access control...................................................................................................................... 115
7.1.3 Operation view ..................................................................................................................... 116
7.1.4 Navigation view .................................................................................................................... 125
7.1.5 Parameter view .................................................................................................................... 127

Table of contents
FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF 5
8 Functions............................................................................................................................................ 131
8.1 Process values......................................................................................................................131
8.2 Zero point adjustment ...........................................................................................................134
8.3 Low flow cut-off .....................................................................................................................135
8.4 Empty tube monitoring..........................................................................................................135
8.5 Process noise damping.........................................................................................................136
8.6 Inputs and outputs ................................................................................................................138
8.6.1 Current output .......................................................................................................................139
8.6.2 Pulse output ..........................................................................................................................144
8.6.3 Frequency output ..................................................................................................................145
8.6.4 Redundancy mode................................................................................................................146
8.6.5 Status output.........................................................................................................................147
8.6.6 Input ......................................................................................................................................147
8.7 Totalizers ..............................................................................................................................148
8.8 Dosing...................................................................................................................................149
8.8.1 Dosing control configuration .................................................................................................150
8.8.2 Valve control configuration ...................................................................................................151
8.8.3 Dosing operation...................................................................................................................156
8.8.4 Fault handling .......................................................................................................................157
8.9 Audit trail ...............................................................................................................................157
8.10 Alarm acknowledgement ......................................................................................................157
8.11 Custom unit...........................................................................................................................158
8.12 SensorFlash..........................................................................................................................158
8.13 Simulation .............................................................................................................................158
8.14 Maintenance .........................................................................................................................160
9 Custody Transfer ................................................................................................................................ 161
9.1 Operating conditions.............................................................................................................161
9.2 Verification ............................................................................................................................161
9.3 Setting up custody transfer mode .........................................................................................163
9.4 Parameter protection in custody transfer mode....................................................................166
9.5 Disabling custody transfer mode ..........................................................................................170
10 Alarms and system messages............................................................................................................. 171
10.1 Overview of messages and symbols ....................................................................................171
10.2 Alarm messages ...................................................................................................................172
11 Service and maintenance.................................................................................................................... 181
11.1 Maintenance .........................................................................................................................181
11.2 Service information ...............................................................................................................181
11.3 Recalibration .........................................................................................................................182

Table of contents
FC430 with HART
6Operating Instructions, 05/2015, A5E03361511-AF
11.4 Technical support................................................................................................................. 183
11.5 Transportation and storage.................................................................................................. 184
11.6 Cleaning ............................................................................................................................... 184
11.7 Repair................................................................................................................................... 184
11.8 Return and disposal ............................................................................................................. 185
12 Troubleshooting/FAQs .........................................................................................................................187
12.1 Diagnosing with PDM........................................................................................................... 187
12.2 Troubleshooting sensor-related problems ........................................................................... 187
12.3 How do I copy application setup from one device to another? ............................................ 192
12.4 How do I update the firmware?............................................................................................ 192
13 Technical data .....................................................................................................................................193
13.1 Function and system design ................................................................................................ 193
13.2 SensorFlash ......................................................................................................................... 193
13.3 Process variables................................................................................................................. 194
13.4 Bus communication.............................................................................................................. 195
13.5 Performance......................................................................................................................... 195
13.6 Rated operating conditions .................................................................................................. 196
13.7 Pressure drop curves........................................................................................................... 197
13.8 Pressure - temperature ratings ............................................................................................ 198
13.9 Design .................................................................................................................................. 201
13.10 Inputs and outputs ............................................................................................................... 203
13.11 Local display (HMI) .............................................................................................................. 205
13.12 Power supply........................................................................................................................ 205
13.13 Cables and cable entries ..................................................................................................... 205
13.14 Installation torques............................................................................................................... 207
13.15 Certificates and approvals HART......................................................................................... 209
13.16 PED...................................................................................................................................... 211
14 Spare parts/Accessories ......................................................................................................................217
14.1 Ordering ............................................................................................................................... 217
14.2 Ex approved products .......................................................................................................... 217
14.3 Replaceable components .................................................................................................... 218
15 Dimensions and weight ........................................................................................................................223
15.1 Sensor dimensions .............................................................................................................. 223
15.2 Lengths matrix...................................................................................................................... 224
15.3 Transmitter dimensions........................................................................................................ 229

Table of contents
FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF 7
15.4 Mounting bracket ..................................................................................................................230
A HMI menu structure............................................................................................................................. 231
A.1 Main menu ............................................................................................................................231
A.2 Menu item 2.1: Basic Settings ..............................................................................................232
A.3 Menu item 2.2: Process Values ............................................................................................233
A.4 Menu item 2.3: Totalizer .......................................................................................................235
A.5 Menu item 2.4: Inputs/Outputs..............................................................................................236
A.6 Menu item 2.5: Dosing..........................................................................................................241
A.7 Menu item 2.6: Zero Point Adjustment .................................................................................245
A.8 Menu item 2.7: Safe Operation.............................................................................................245
A.9 Menu item 2.8: Display .........................................................................................................246
A.10 Menu item 3.1: Identification.................................................................................................248
A.11 Menu item 3.2: Alarms..........................................................................................................249
A.12 Menu item 3.3: Maintenance ................................................................................................250
A.13 Menu item 3.4: Diagnostics ..................................................................................................251
A.14 Menu item 3.5: Characteristics .............................................................................................251
A.15 Menu item 3.6: SensorFlash.................................................................................................252
A.16 Menu item 3.7: Simulate .......................................................................................................252
A.17 Menu item 3.8: Audit Trail.....................................................................................................254
A.18 Menu item 3.9: Aerated Flow................................................................................................
254
A.19 Menu item 3.10: Self Test.....................................................................................................255
A.20 Menu item 4.6: Mapping of Variables ...................................................................................255
A.21 Menu item 4.7: HART units...................................................................................................255
A.22 Menu item 5.1: Access Management ...................................................................................256
B HART commands................................................................................................................................ 257
B.1 Universal commands ............................................................................................................257
B.2 Common practice commands ...............................................................................................257
C Default settings ................................................................................................................................... 259
C.1 Basic Settings .......................................................................................................................259
C.2 Process Values .....................................................................................................................260
C.3 Totalizer ................................................................................................................................270
C.4 Inputs/Outputs.......................................................................................................................276
C.5 Dosing...................................................................................................................................307
C.6 Zero Point Adjustment ..........................................................................................................329
C.7 Safe Operation......................................................................................................................330

Table of contents
FC430 with HART
8Operating Instructions, 05/2015, A5E03361511-AF
C.8 Display ................................................................................................................................. 331
C.9 Maintenance & Diagnostics ................................................................................................. 356
C.10 Communication .................................................................................................................... 367
C.11 Security ................................................................................................................................ 372
C.12 Language ............................................................................................................................. 373
C.13 Sensor dimension dependent default settings..................................................................... 373
D Zero point adjustment ..........................................................................................................................379
Glossary ..............................................................................................................................................383
Index ...................................................................................................................................................385

FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF 9
Introduction
1
These instructions contain all information required to commission and use the device. Read
the instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
The contents of this manual shall not become part of or modify any prior or existing
agreement, commitment or legal relationship. The sales contract contains all obligations on
the part of Siemens as well as the complete and solely applicable warranty conditions. Any
statements regarding device versions described in the manual do not create new warranties
or modify the existing warranty.
The content reflects the technical status at the time of publishing. Siemens reserves the right
to make technical changes in the course of further development.
1.1
History
The following table shows major changes in the documentation compared to the previous
edition.
Edition
Remarks
EDD version
FW revision
03/2012 •First edition •SIMATIC PDM driver 1.00.00
06/2012 •CT chapter included •SIMATIC PDM driver 1.00.00 •Standard version:
–Compact: 3.00.00-10
–Remote: 2.00.00-30
•CT version:
–Compact: 3.00.00-11
–Remote: 2.00.00-31
12/2013 •Various LUI functions, for
example wizards
•Various transmitter func-
tionalities
•SIMATIC PDM driver 2.00.00-**
•AMS Device Manager 2.00.00-**
•SITRANS DTM 2.00.00-**
•375 Field Communicator 2.00.00-**
•Compact version: 3.02.0*-**
•Remote version: 2.02.0*-**

Introduction
1.2 Compatibility
FC430 with HART
10 Operating Instructions, 05/2015, A5E03361511-AF
Edition
Remarks
EDD version
FW revision
05/2014 •Description of new param-
eters for spare part re-
placement
•SIMATIC PDM driver 3.00.00-**
•AMS Device Manager 3.00.00-**
•SITRANS DTM 3.00.00-**
•375 Field Communicator 3.00.00-**
•Compact version: 3.02.01-**
•Remote version: 2.02.01-**
05/2015 •Aerated Flow parameters
added
•SIMATIC PDM driver HART EDD:
4.00.00-00 **
•SIMATIC PDM driver MODBUS:
4.00.00-00 **
•AMS Device driver HART: 4.00.00-
02 **
•SITRANS DTM HART: 4.00.00-00 **
•375 Field Communicator HART:
4.00.00-02 **
•Compact version: 3.02.02-01
**
•Remote version: 2.02.02-01
**
1.2
Compatibility
FW/HW revisions and EDD versions compatibility
Table 1- 1 Remote version
FW revision
HW revision
HART EDDs
(PDM/AMS/DTM/HCF)
2.00.0x-xx
01
V 1.00.00-xx, Revision 1
2.02.00-xx 02 V 2.00.00-xx, Revision 2
2.02.02-xx
02
V 4.00.00-xx, Revision 3
Table 1- 2 Compact version
FW revision
HW revision
HART EDDs
(PDM/AMS/DTM/HCF)
3.00.0x-xx
01
V 1.00.00-xx, Revision 1
3.02.00-xx
02
V 2.00.00-xx, Revision 2
3.02.02-xx
02
V 4.00.00-xx, Revision 3

Introduction
1.3 Items supplied
FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF 11
1.3
Items supplied
The device can be delivered as either a compact or a remote system.
Compact system
•
SITRANS FC430 sensor and compact
mounted transmitter
•
Packet of cable glands
•
Quick Start guide
•
CD containing software, certificates and
device manuals
Remote system
Remote with M12 plug connection
•
SITRANS FCS400 sensor
•
SITRANS FCT030 transmitter with
M12 socket assembled
•
Mounting bracket and cushion pad
•
Sensor cable with M12 connector
•
Packet of cable glands
•
Quick Start guide
•
CD containing software, certificates
and device manuals
Remote with sensor terminal housing
•
SITRANS FCS400 sensor
•
SITRANS FCT030 transmitter with
terminal housing assembled
•
Mounting bracket and cushion pad
•
Sensor cable
•
Packet of cable glands
•
Quick Start guide
•
CD containing software, certificates
and device manuals

Introduction
1.4 Checking the consignment
FC430 with HART
12 Operating Instructions, 05/2015, A5E03361511-AF
Note
Supplementary information
Supplementary prod
uct and production specific certificates are included on the SensorFlash
®
SD card in the transmitter socket.
Note
Scope of delivery may vary, depending on version and add
-ons. Make sure the scope of
delivery and the information on the nameplate corres
pond to your order and the delivery
note.
1.4
Checking the consignment
1. Check the packaging and the delivered items for visible damage.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for
correctness and completeness.
WARNING
Using a damaged or incomplete device
Danger of explosion in hazardous areas.
•Do not use damaged or incomplete devices.
1.5
Device identification
Each part of the FC430 Coriolis flowmeter has three nameplate types showing the following
information:
●product identification
●product specifications
●certificates and approvals
Note
Identification
Identify your device by comparing your ordering data with the inform
ation on the product
and specification nameplates.

Introduction
1.5 Device identification
FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF 13
With compact versions, the transmitter and sensor product identifications are both given as
'Coriolis flowmeter SITRANS FC430'.
With remote versions, the transmitter is identified as 'Coriolis transmitter SITRANS FCT030'
and the sensor as 'Coriolis sensor SITRANS FCS400'.
FCT030 transmitter identification nameplate
①
Product name
Transmitter product name
②
System order no.
Device-specific system order number (transmitter and sensor)
③
Transm. order no.
Transmitter replacement order number
④
Power Supply
Power supply
⑤
Material
Transmitter housing material and style (compact/remote)
⑥
Conduit / cable entries
Type of conduit / cable entries
⑦
Manufacturer
Manufacturer name and location
⑧
Country
Manufacturing country
⑨
Serial no.
Transmitter serial number
⑩
System revisions
System revision numbers; firmware (FW) and hardware (HW)
⑪
Year of Manufacture Manufacturing year
More detailed manufacturing date information is given in the
serial number (see sensor identification nameplate above)
⑫
Enclosure IP
Degree of protection
⑬
Ambient temp.
Ambient temperature
Figure 1-1 FCT030 identification nameplate example

Introduction
1.5 Device identification
FC430 with HART
14 Operating Instructions, 05/2015, A5E03361511-AF
FCS400 sensor identification nameplate
①
Product name
Sensor product name
②
Serial no.
Sensor serial number
③
Sen.
Mechanical sensor version number
④
Manufacturer
Manufacturer name and location
⑤
Country
Manufacturing country
⑥
Sensor order no.
Sensor replacement order number
⑦
System order no.
Flowmeter system order number (transmitter and sensor)
Figure 1-2 FCS400 identification nameplate example
Flowmeter serial number construction
The flowmeter serial number is constructed as follows:
PPPYMDDxxxxxx
where
PPP = Production factory (Siemens Flow Instruments: FDK)
Y = Production year (for encryption, see below)
M = Production month (for encryption, see below)
DD = Production date (for encryption, see below)
xxxxxx = Sequential number
Encryption:
Calendar year (Y)
Code
1950, 1970, 1990, 2010
A
1951, 1971, 1991, 2011
B
1952, 1972, 1992, 2012
C
1953, 1973, 1993, 2013
D
1954, 1974, 1994, 2014
E
1955, 1975, 1995, 2015
F
1956, 1976, 1996, 2016
H (G)
1957, 1977, 1997, 2017
J
1958, 1978, 1998, 2018
K
1959, 1979, 1999, 2019
L
1960, 1980, 2000, 2020
M

Introduction
1.5 Device identification
FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF 15
1961, 1981, 2001, 2021
N
1962, 1982, 2002, 2022
P
1963, 1983, 2003, 2023
R
1964, 1984, 2004, 2024
S
1965, 1985, 2005, 2025
T
1966, 1986, 2006, 2026
U
1967, 1987, 2007, 2027
V
1968, 1988, 2008, 2028
W
1969, 1989, 2009, 2029
X
Month (M)
Code
January
1
February
2
March
3
April
4
May
5
June
6
July
7
August
8
September
9
October
O
November
N
December
D
Date (DD)
Code
Day 1 to 31
01 to 31 (corresponding to the actual date)

Introduction
1.5 Device identification
FC430 with HART
16 Operating Instructions, 05/2015, A5E03361511-AF
FCT030 transmitter specification nameplate
①
CE
CE mark
②
0539
ATEX Notified Body ID (UL-DEMKO)
③
Ex
Ex mark Installation in hazardous locations (Page 23)
④
SW Function
Software function ("Standard" or "CT standard")
⑤
Ch1 Communication interface on channel 1 (always 4-20 mA with
HART, active or passive)
⑥
Ch2
Ch3
Ch4
Input/output setup of channels 2 to 4, if ordered
⑦
WEEE symbol, see Return and disposal (Page 185)
⑧
Consult the operating instructions
⑨
Ex approvals
Ex approval specifications for the transmitter (ATEX example; for
details on all approvals refer to Certificates and approvals HART
(Page 209))
Figure 1-3 FCT030 specification nameplate example
Note
Approval identifications
Approval certificates and notified body identifications are available for download at
www.siemens.com (
http://support.automation.siemens.com/WW/view/en/60666565/134200).

Introduction
1.5 Device identification
FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF 17
FCS400 sensor specification nameplate
①
Ex approvals Ex approval specifications for the sensor (ATEX example; for
details on all approvals refer to Certificates and approvals HART
(Page 209))
②
Consult the operating instructions
③
CE
CE mark
④
0539
Notified Body ID (ATEX example)
⑤
Ex
Ex mark, Installation in hazardous locations (Page 23)
⑥
MAWP Maximum allowable working pressures at 20 °C (68 °F) and 200
°C (392 °F) (max. temperature (TS))
⑦
Fluid group
Fluid group statement required by PED
⑧
Wetted material
Measuring tube/process connection materials
⑨
Min. fluid temperature
Minimum fluid temperature
⑩
Size DN
Nominal size
⑪
Conn.
Process connection type and size
⑫
Year of Manufacture Manufacturing year
More detailed manufacturing date information is given in the
serial number found on the identification nameplate
⑬
Cal. Factor
Calibration factor
⑭
Qm (min)
Qm (nom)
Minimum and nominal massflows with water at 20 °C (68 °F)
⑮
Power Supply Power supply (not given on the compact variant because it is
internal)
⑯
Enclosure IP
Degree of protection
⑰
Ambient Temp.
Ambient temperature range
⑱
Accuracy
Massflow, density calibration accuracy
Figure 1-4 FCS400 specification nameplate example

Introduction
1.5 Device identification
FC430 with HART
18 Operating Instructions, 05/2015, A5E03361511-AF
FCT030 transmitter approval nameplate
①
FORCE OIML
Custody Transfer evaluation certificate number
②
C✓
C-tick logo
③
QR code
Product-specific QR code
Figure 1-5 FCT030 approval nameplate example
FCS400 sensor approval nameplate
①
QR code
Product-specific QR code
②
C✓
C-tick logo
③
3A
3A logo
④
WEEE symbol, see Return and disposal (Page 185)
Figure 1-6 FCS400 approval nameplate example
Note
Logos and warnings
Logos and warnings are only shown on the product where applicable. The combination
shown in the example above is relevant for a hygienic sensor installed in hazardous location
in Canada.
The Australian C
-tick mark is mandatory on all products.