Siemens SITRANS FUS060 HART User manual

SITRANS F
Ultrasonic Flowmeters
SITRANS FUS060 with HART
Operating Instructions
7ME305 (FUS060 with HART)
09/2021
A5E01204521-AL
Introduction 1
Safety notes 2
Description 3
Installing/Mounting 4
Connecting 5
Commissioning 6
Functions 7
Service and maintenance 8
Diagnostics and
troubleshooting 9
Technical speci󹪝cations 10
Dimension drawings 11
Product documentation and
support A
HART communication B
HMI menu structure C

Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage
to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices
referring only to property damage have no safety alert symbol. These notices shown below are graded according to
the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be
used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property
damage.
Quali󹪝ed Personnel
The product/system described in this documentation may be operated only by personnel quali󹪝ed for the speci󹪝c
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Quali󹪝ed personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended or
approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance
are required to ensure that the products operate safely and without any problems. The permissible ambient
conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identi󹪝ed by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may
be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described.
Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this
publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Siemens AG
Digital Industries
Postfach 48 48
90026 NÜRNBERG
GERMANY
Document order number: A5E01204521
Ⓟ 09/2021 Subject to change
Copyright © Siemens AG 2021.
All rights reserved

Table of contents
1 Introduction ........................................................................................................................................... 7
1.1 Purpose of this documentation ............................................................................................ 7
1.2 Scope of documentation...................................................................................................... 7
1.3 Document history ................................................................................................................ 7
1.4 Designated use .................................................................................................................... 8
1.5 Checking the consignment................................................................................................... 8
1.6 Items supplied ..................................................................................................................... 8
1.7 Security information ............................................................................................................ 9
1.8 Transportation and storage .................................................................................................. 9
1.9 How to read the Operating Instructions.............................................................................. 10
1.10 Further Information ........................................................................................................... 10
2 Safety notes ......................................................................................................................................... 13
2.1 General safety instructions................................................................................................. 13
2.2 Laws and directives............................................................................................................ 13
2.3 Installation in hazardous locations...................................................................................... 14
3 Description........................................................................................................................................... 19
3.1 Overview........................................................................................................................... 19
3.2 Design............................................................................................................................... 19
3.3 Nameplate layout............................................................................................................... 21
3.4 Measuring principle ........................................................................................................... 22
4 Installing/Mounting ............................................................................................................................. 25
4.1 Introduction....................................................................................................................... 25
4.2 Transmitter installation ...................................................................................................... 26
4.2.1 Standard wall-mounting bracket......................................................................................... 26
4.2.2 Pipe or wall mounting with assembly bracket ..................................................................... 26
4.2.3 Turning the local display..................................................................................................... 28
5 Connecting .......................................................................................................................................... 29
5.1 Wiring the transducer cables .............................................................................................. 31
5.2 Wiring output and power supply ........................................................................................ 33
6 Commissioning .................................................................................................................................... 37
6.1 Start up ............................................................................................................................. 37
6.2 Operating the device.......................................................................................................... 37
SITRANS FUS060 with HART
Operating Instructions, 09/2021, A5E01204521-AL 3

6.3 Commissioning via local user interface............................................................................... 38
6.3.1 Operating via local display ................................................................................................. 38
6.3.2 Operating via HART communication ................................................................................... 38
6.3.3 Navigating the menu ......................................................................................................... 39
6.3.4 Write protection................................................................................................................. 40
6.3.5 Operating examples........................................................................................................... 41
6.4 Commissioning via SIMATIC PDM........................................................................................ 43
6.4.1 Con󹪝guration..................................................................................................................... 44
7 Functions ............................................................................................................................................. 47
7.1 Display (menu 1) ............................................................................................................... 47
7.2 Diagnostics (menu 2)......................................................................................................... 49
7.3 Measuring functions (menu 3) ........................................................................................... 50
7.4 Device outputs (menu 4).................................................................................................... 53
7.5 Identi󹪝cation (menu 5) ...................................................................................................... 58
7.6 Service (menu 6) ............................................................................................................... 59
7.7 Sensor parameters (menu 7).............................................................................................. 61
8 Service and maintenance .................................................................................................................... 67
8.1 Maintenance...................................................................................................................... 67
8.2 Return procedure............................................................................................................... 67
8.3 Keying in sensor data......................................................................................................... 68
9 Diagnostics and troubleshooting......................................................................................................... 71
9.1 Application information guide............................................................................................ 73
10 Technical speci󹪝cations ....................................................................................................................... 75
10.1 SITRANS FUS060................................................................................................................ 75
11 Dimension drawings............................................................................................................................ 81
11.1 Dimensional drawings........................................................................................................ 81
A Product documentation and support .................................................................................................. 83
A.1 Product documentation ..................................................................................................... 83
A.2 Technical support............................................................................................................... 84
B HART communication .......................................................................................................................... 85
B.1 Universal commands.......................................................................................................... 85
B.2 Common practice commands............................................................................................. 86
B.3 Device-speci󹪝c commands ................................................................................................. 88
C HMI menu structure........................................................................................................................... 103
C.1 Menu items (FW Rev. 4.00.00-15) .................................................................................... 104
C.1.1 Menu 1 - Display .............................................................................................................. 104
C.1.2 Menu 2 - Diagnostics ....................................................................................................... 106
C.1.3 Menu 3 - Measuring functions.......................................................................................... 107
Table of contents
SITRANS FUS060 with HART
4Operating Instructions, 09/2021, A5E01204521-AL

C.1.4 Menu 4 - Device outputs .................................................................................................. 110
C.1.5 Menu 5 - Identi󹪝cation..................................................................................................... 111
C.1.6 Menu 6 - Service.............................................................................................................. 112
C.1.7 Menu 7 - Sensor parameters............................................................................................. 115
Index .................................................................................................................................................. 121
Table of contents
SITRANS FUS060 with HART
Operating Instructions, 09/2021, A5E01204521-AL 5

Table of contents
SITRANS FUS060 with HART
6Operating Instructions, 09/2021, A5E01204521-AL

Introduction 1
1.1 Purpose of this documentation
These instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, 󹪝rst review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, con󹪝guring the parameters and commissioning it, as well as service and
maintenance engineers.
1.2 Scope of documentation
For 󹪞owmeters based on the FUS060 transmitter various technical literature such as operating
instructions and quick start guides are available on the CD-ROM shipped with the device, or it can
be found on the Internet at www.siemens.com/󹪞owdocumentation (www.siemens.com/
󹪞owdocumentation), where further information on the SITRANS F 󹪞owmeter range is also
available.
SITRANS F US sensor and transmitter versions have separate operating instructions.
These Operating Instructions concern only the FUS060 HART transmitter part of the 󹪞owmeter
system. The FUS060 PROFIBUS PA transmitter version and SONO 3100, SONO 3300 or SONOKIT
sensors have separate operating instructions.
1.3 Document history
The contents of these instructions are regularly reviewed and corrections are included in
subsequent editions. We welcome all suggestions for improvement.
The following table shows the most important changes in the documentation compared to each
previous edition.
Edition Remarks FW version EDD version
09/2021 • New 󹪝rmware
• Minor 󹪝rmware correction for high 󹪞ow rates
up 12 m/s
• Cable glands information
4.00.00-15 4.00.00
08/2015 • New 󹪝rmware
• Frontend update
4.00.00 4.00.00
SITRANS FUS060 with HART
Operating Instructions, 09/2021, A5E01204521-AL 7

Edition Remarks FW version EDD version
03/2014 • Diagnostics section improved
• HART description added
• Description of new functions added
• General update according to FW update
3.00.00 2.00.00
11/2009 • First edition 2.01.07 1.00.01
1.4 Designated use
Use the device in accordance with the information on the nameplate and in the Technical
speci󹪝cations (Page 75).
1.5 Checking the consignment
1. Check the packaging and the delivered items for visible damages.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clari󹪝cation.
4. Check the scope of delivery by comparing your order to the shipping documents for
correctness and completeness.
WARNING
Using a damaged or incomplete device
Risk of explosion in hazardous areas.
• Do not use damaged or incomplete devices.
1.6 Items supplied
• SITRANS FUS060
• Wall mounting bracket (standard)
• DVD containing certi󹪝cates
• Safety note
Introduction
1.6 Items supplied
SITRANS FUS060 with HART
8Operating Instructions, 09/2021, A5E01204521-AL

Note
Scope of delivery may vary, depending on version and add-ons. Make sure the scope of delivery
and the information on the nameplate correspond to your order and the delivery note.
1.7 Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary
to implement – and continuously maintain – a holistic, state-of-the-art industrial security
concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be connected to
an enterprise network or the internet if and to the extent such a connection is necessary and only
when appropriate security measures (e.g. 󹪝rewalls and/or network segmentation) are in place.
For additional information on industrial security measures that may be implemented, please
visit
https://www.siemens.com/industrialsecurity.
Siemens’ products and solutions undergo continuous development to make them more secure.
Siemens strongly recommends that product updates are applied as soon as they are available
and that the latest product versions are used. Use of product versions that are no longer
supported, and failure to apply the latest updates may increase customer’s exposure to cyber
threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed
under
https://www.siemens.com/industrialsecurity.
1.8 Transportation and storage
To guarantee su󹪟cient protection during transport and storage, observe the following:
• Keep the original packaging for subsequent transportation.
• Devices/replacement parts should be returned in their original packaging.
• If the original packaging is no longer available, ensure that all shipments are properly
packaged to provide su󹪟cient protection during transport. Siemens cannot assume liability
for any costs associated with transportation damages.
NOTICE
Insu󹪟cient protection during storage
The packaging only provides limited protection against moisture and in󹪝ltration.
• Provide additional packaging as necessary.
Introduction
1.8 Transportation and storage
SITRANS FUS060 with HART
Operating Instructions, 09/2021, A5E01204521-AL 9

Special conditions for storage and transportation of the device are listed in Technical
speci󹪝cations (Page 75).
The contents of this manual shall not become part of or modify any prior or existing agreement,
commitment or legal relationship. The sales contract contains all obligations on the part of
Siemens as well as the complete and solely applicable warranty conditions. Any statements
regarding device versions described in the manual do not create new warranties or modify the
existing warranty.
The content re󹪞ects the technical status at the time of publishing. Siemens reserves the right to
make technical changes in the course of further development.
1.9 How to read the Operating Instructions
These Operating Instructions describe only the installation of the FUS060 HART transmitter
(with HART interface). The 󹪞owmeter consists of a transmitter (FUS060) and a sensor (SONO
3100, SONO 3300 or SONOKIT) and is designed for measuring the 󹪞ow velocity of liquids in full
pipes. Satisfactory function of the ultrasonic 󹪞owmeter depends on a low sound attenuation of
the medium and a well-de󹪝ned and stable 󹪞ow pro󹪝le.
The installation of ultrasonic 󹪞owmeter system divided into 5 steps:
1. Selection of the measuring site
2. Installation of the sensor in the pipe (see separate sensor manual)
3. Mechanical installation of the transmitter (for example wall mounting)
4. Electrical connection of the transmitter
5. Electrical connection of the sensor transducers to the transmitter
Siemens Flow Instruments SITRANS F US ultrasonic 󹪞owmeters are designed for measurement
of:
• Volume or mass 󹪞owrate
• Limit monitoring
• Total volume or mass
• Sound velocity in the media
SITRANS F US ultrasonic 󹪞owmeters measure 󹪞ow in standard volumetric and mass 󹪞ow units.
Measurement is independent of changes in liquid temperature, density, pressure, and
conductivity. This ultrasonic 󹪞owmeter is designed for use on single phase liquids.
1.10 Further Information
Product information on the Internet
The Operating Instructions are available on the documentation disk shipped with the device,
and on the Internet on the Siemens homepage, where further information on the range of
SITRANS F 󹪞owmeters may also be found:
Introduction
1.10 Further Information
SITRANS FUS060 with HART
10 Operating Instructions, 09/2021, A5E01204521-AL

Product information on the internet (http://www.siemens.com/󹪞owdocumentation)
Worldwide contact person
If you need more information or have particular problems not covered su󹪟ciently by these
Operating Instructions, get in touch with your contact person. You can 󹪝nd contact information
for your local contact person on the Internet:
Local contact person (http://www.automation.siemens.com/aspa_app/contactmenu.aspx?
ci=yes&regid=DEF&lang=en)
Introduction
1.10 Further Information
SITRANS FUS060 with HART
Operating Instructions, 09/2021, A5E01204521-AL 11

Introduction
1.10 Further Information
SITRANS FUS060 with HART
12 Operating Instructions, 09/2021, A5E01204521-AL

Safety notes 2
2.1 General safety instructions
CAUTION
Correct, reliable operation of the product requires proper transport, storage, positioning
and assembly as well as careful operation and maintenance.
Only quali󹪝ed personnel should install or operate this instrument.
Note
Alterations to the product, including opening or improper modi󹪝cations of the product are not
permitted.
If this requirement is not observed, the CE mark and the manufacturer's warranty will expire.
2.2 Laws and directives
General requirements
Installation of the equipment must comply with national regulations. For example EN 60079-14
for the European Community.
Instrument safety standards
The device has been tested at the factory, based on the safety requirements. In order to maintain
this condition over the expected life of the device the requirements described in these Operating
Instructions must be observed.
NOTICE
Material compatibility
Siemens Flow Instruments can provide assistance with the selection of wetted sensor parts.
However, the full responsibility for the selection rests with the customer and Siemens Flow
Instruments can take no responsibility for any failure due to material incompatibility.
SITRANS FUS060 with HART
Operating Instructions, 09/2021, A5E01204521-AL 13

Conformity with European directives
The CE marking on the device symbolizes the conformity with the following European directives:
Electromagnetic compatibil‐
ity EMC
2014/30/EU
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to elec‐
tromagnetic compatibility
Low voltage directive LVD
2014/35/EU
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of electrical equipment designed
for use within certain voltage limits
Atmosphère explosible ATEX
2014/34/EU
Directive of the European Parliament and the Council on the har‐
monisation of the laws of the Member States relating to equip‐
ment and protective systems intended for use in potentially ex‐
plosive atmospheres
Pressure equipment direc‐
tive PED
2014/68/EU
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of pressure equipment
2011/65/EU RoHS Directive of the European Parliament and the Council on the re‐
striction of the use of certain hazardous substances in electrical
and electronic equipment
The applicable directives can be found in the EU declaration of conformity of the speci󹪝c device.
Further country or region-speci󹪝c code conformity information is available on request.
2.3 Installation in hazardous locations
WARNING
Equipment used in hazardous locations
Equipment used in hazardous locations must be Ex-approved for the region of installation and
marked accordingly. It is required that the special conditions for safe use provided in the
manual and in the Ex certi󹪝cate are followed!
Hazardous area approvals
The device is approved for use in hazardous area and has the following approval:
• PTB 07 ATEX 2033 X with the marking: II 2 G Ex db eb mb [ia Ga] IIC T6…T3 Gb
The device's compliance with Essential Health and Safety Requirements has been assured by
compliance with:
Safety notes
2.3 Installation in hazardous locations
SITRANS FUS060 with HART
14 Operating Instructions, 09/2021, A5E01204521-AL

EN IEC 60079-0:2018; EN 60079-1:2014, EN IEC 60079-7:2015+A1:2018, EN 60079-11:2012,
EN 60079-18:2015/A1:2017
WARNING
Field wiring installation
Make sure the hazardous area approval is suitable for the environment in which the device will
be installed.
Intrinsically safe data
Power supply
19.2 V to 30 V DC, approximately 10 W or 20.4 to 26.4 V AC, approximately 10 VA
Fuse: 4 A / breaking capacity 1500 A
Table 2-1 Intrinsically safe data
HART output
(Terminals 7+ and 8-)
Linear barrier ia/ib IIC/IIB
(active output)
Uo15.8 V
Io64 mA
Po253 mW
Ri250 Ω
/R&R>P+@>Q)@,,&,,%
Figure 2-1 Admissible outer reactanses
Digital output 1 (pulse/frequency/limit)
(Terminals 5+ and 6-)
Ex ia IIC/IIB or Ex ib IIC/IIB
(passive output)
Ui30 V
Ii100 mA
Ci24 nF
Li108 μH
Pi750 mW
Digital output 2 (relay)
(Terminals 3+ and 4-)
Ex ia IIC/IIB or Ex ib IIC/IIB
(passive output)
Ui30 V
Ii100 mA (DC), 50 mA (AC)
Ci24 nF
Li73 μH
Safety notes
2.3 Installation in hazardous locations
SITRANS FUS060 with HART
Operating Instructions, 09/2021, A5E01204521-AL 15

WARNING
Use with intrinsically safe circuits
With intrinsically safe circuits, use only certi󹪝ed sensors appropriate for the transmitter.
If a non-conforming supply unit is used, the "Intrinsic Safety" type of protection will no longer
be e󹪜ective and the approval certi󹪝cation will be invalid.
Permissible medium temperature speci󹪝cations for Ex use
Temperature class Ambient temperature [°C]
-20 to +40 -20 to +50
T3 165 140
T4 100 100
T6 50 50
Hazardous area safety requirements
Special conditions for safe use
1. The sensor circuits of the transmitter, type SITRANS FUS060 are exclusively intended for
connection to the associated sensor units of types SITRANS FUS SONO 3100, SITRANS FUS
SONO 3000 and SITRANS FUS SONOKIT, which – for their part – are approved only for
connection to a transmitter of type series SITRANS FUS060.
2. The connecting cable of the transmitter, type SITRANS FUS060 shall be layed as 󹪝xed
installation and in such a way that it is su󹪟ciently protected against damage.
3. The transmitter, type SITRANS FUS060 shall be included in the local equipotential bonding
system.
4. Non-used openings shall be sealed according to EN 60079-0.
Notes for manufacture and operation
For the assembly, mounting and installation only such components (e.g. terminal
compartments, cable glands, Ex cable entries, connection facilities) are approved which
technically comply with the status of the standards given on the cover sheet as a minimum and
for which a separate certi󹪝cate is available. The operating conditions stated in the respective
certi󹪝cates of these components shall be absolutely observed.
Connection requirements
It is required that:
• Electrical connections are in accordance with Elex V (VO in explosion hazardous areas) and
EN60079-14 (Installing Electrical Systems in Explosion Hazardous Areas).
• The protective cover over the power supply is properly installed. For intrinsically safe circuits
the connection area can be opened.
Safety notes
2.3 Installation in hazardous locations
SITRANS FUS060 with HART
16 Operating Instructions, 09/2021, A5E01204521-AL

• Appropriate cable connectors are used for the output circuits:
– Intrinsically safe: blue
– Non-intrinsically safe: black
• Sensor and transmitter are connected to the equipotential bonding system (PA) (min. 4
mm2).
For intrinsically safe output circuits potential equalization must be maintained along the
entire connection path.
• When protective earth (PE) is connected, no potential di󹪜erence between the protective
earth (PE) and the equipotential bonding system (PA) can exist, even during a fault condition.
WARNING
"Flameproof enclosure" type of protection
Only open devices with type of protection "Flameproof enclosure" in hazardous areas when
the power to the device is turned o󹪜, otherwise there is a risk of explosion.
WARNING
500 V insulation test
The device is not capable of withstanding the 500 V insulation test required by Clause
6.3.12 of EN60079-11. This must be taken into account when installing the device.
WARNING
Laying of cables
Cable for use in zone 1 and 2 or 21 and 22 must satisfy the requirements for having a proof
voltage < 500 V AC applied between the conductor/ground, conductor/shield and shield/
ground.
Connect the devices that are operated in hazardous areas as per the stipulations applicable
in the country of operation, e.g. for Ex "d" and "nA", permanent cables must be laid.
Safety notes
2.3 Installation in hazardous locations
SITRANS FUS060 with HART
Operating Instructions, 09/2021, A5E01204521-AL 17

Safety notes
2.3 Installation in hazardous locations
SITRANS FUS060 with HART
18 Operating Instructions, 09/2021, A5E01204521-AL

Description 3
3.1 Overview
The SITRANS F US ultrasonic 󹪞owmeter systems consist of a sensor and a transmitter. This
system consists of sensor type SONO 3100, SONO 3300 or SONOKIT and the transmitter type
FUS060. The following table shows the ultrasonic 󹪞owmeter systems with the transmitter type
FUS060:
Sensor type Transmitter Outputs Measurement
SONO 3100
DN 100 – DN 1200
SONO 3300
DN 50 – DN 300
SONOKIT
DN 100 – DN 4000
FUS060 • 1 analog with HART
• 1 frequency/pulse
• 1 relay
• Volume 󹪞ow rate
• Total volume
• Mass 󹪞ow rate
• Total mass
• Sound velocity
• Error indication
• Limit monitoring
• Ultrasonic amplitude
These Operating Instructions is only for the transmitter part of the 󹪞owmeter system. The SONO
3100, SONO 3300 or SONOKIT sensors have separate operating instructions.
The FUS060 is con󹪝gured in a combination of hardware (HW) and 󹪝rmware (FW). For
communication via SIMATIC PDM 󹪝rmware-speci󹪝c device descriptions are needed. The various
relations are listed below:
Device EDD (device description)
HW FW 1.00.01 2.00.00 4.00.00
02.00 2.01.04 X
02.00 2.01.07 X
02.00 3.00.00 X
04.00 4.00.00-15 X
3.2 Design
SITRANS FUS060 is an ultrasonic 󹪞ow transmitter engineered for high performance and suitable
for use with 1-path, 2-path, and 4-path 󹪞ow sensors.
The complete 󹪞owmeter consists of an ultrasonic 󹪞ow sensor of the types SONO 3100, SONO
3300 or SONOKIT and the associated SITRANS FUS060 transmitter.
The ultrasonic 󹪞ow sensors are available with diameters up to DN 4000.
SITRANS FUS060 with HART
Operating Instructions, 09/2021, A5E01204521-AL 19

Figure 3-1 FUS060
Description
3.2 Design
SITRANS FUS060 with HART
20 Operating Instructions, 09/2021, A5E01204521-AL