
IFP V2 built-in devices and Transceiver Unit UL hazardous information
Product Information, 12/2023, A5E53493649-AA 3
Table of contents
1 Overview................................................................................................................................................ 4
2 Safety instructions................................................................................................................................. 6
2.1 General safety instructions................................................................................................... 6
2.2 Use in hazardous areas ........................................................................................................ 7
3 Installing and connecting the device .................................................................................................... 9
3.1 Preparing for installation...................................................................................................... 9
3.1.1 Checking the delivery package ............................................................................................. 9
3.1.2 Built-in devices .................................................................................................................. 10
3.1.2.1 Permitted mounting positions............................................................................................ 10
3.1.2.2 Required clearance ............................................................................................................ 12
3.1.2.3 Preparing the mounting cutout .......................................................................................... 13
3.1.2.4 Installing the strain relief plate........................................................................................... 14
3.1.3 Transceiver Unit................................................................................................................. 15
3.1.3.1 Permitted mounting positions............................................................................................ 15
3.1.3.2 Required clearance ............................................................................................................ 16
3.1.3.3 Fastening the mounting rail ............................................................................................... 16
3.2 Installing the built-in device ............................................................................................... 17
3.2.1 Notes on installation.......................................................................................................... 17
3.2.2 Positions of the mounting clips .......................................................................................... 18
3.2.3 Fastening the built-in device using mounting clips ............................................................. 19
3.3 Mounting the Transceiver Unit ........................................................................................... 21
3.4 Connecting the device ....................................................................................................... 22
3.4.1 Notes on connection.......................................................................................................... 22
3.4.2 Equipotential bonding ....................................................................................................... 24
3.4.3 Connecting the power supply............................................................................................. 27
3.4.4 Connecting IFP Standard and Extended to a PC................................................................... 29
3.4.4.1 Important notes for connecting.......................................................................................... 29
3.4.4.2 Connecting the standard version to a PC ............................................................................ 29
3.4.4.3 Connecting the extended version to a PC ........................................................................... 30
3.4.5 Connecting the Ethernet Monitor to a PC............................................................................ 33
3.4.5.1 Overview........................................................................................................................... 33
3.4.5.2 Connection variants ........................................................................................................... 34
3.4.6 Connecting a USB device to the IFP .................................................................................... 35
3.4.7 Securing the cables............................................................................................................ 36
3.4.7.1 Securing cables at the IFP................................................................................................... 36
3.4.7.2 Securing cables at the Transceiver Unit .............................................................................. 36
3.4.7.3 Securing cables for use in hazardous areas......................................................................... 36
3.5 Removing the device.......................................................................................................... 37
3.5.1 Removing the built-in device.............................................................................................. 37
3.5.2 Removing Transceiver Unit................................................................................................. 38
4 Technical support ................................................................................................................................ 39
Index .................................................................................................................................................... 40