SIIG AV-GM07N3-S1 User manual

36x36 HDMI Matrix Switcher with Full 3D
Support
P/N: AV-GM07N3-S1

~ 1 ~
Safety and Notice
The AV-GM07N3-S1 36x36 HDMI Matrix Switcher with Full 3D Support has been tested for
conformance to safety regulations and requirements, and has been certified for international
use. However, like all electronic equipments, the AV-GM07N3-S1 should be used with care. Please
read and follow the safety instructions to protect yourself from possible injury and to minimize
the risk of damage to the unit.
Follow all instructions and warnings marked on this unit.
Do not attempt to service this unit yourself, except where explained in this manual.
Provide proper ventilation and air circulation and do not use near water.
Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
Use only the power adapter and power cords and connection cables designed for this unit.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.

~ 2 ~
The 36x36 HDMI Matrix Switcher with Full 3D Support HDMI Matrix provides the most flexible
and cost effective solution in the market to route high definition video sources plus
multi-channel (up to 7.1 channel) digital audio from any of the four HDMI sources to the any four
displays at the same time. This solution is well suited for use in home theater, conference room
presentation systems, or other similar setting or application.
Introduction

~ 3 ~
Features
Support HDMI Deep Color & full 3D
HDCP compliant.
Allows any source to be displayed on multiple displays at the same time.
Allows any HDMI display to view any HDMI source at any time.
Supports 7.1 channel digital audio.
Supports default HDMI EDID and learns the EDID of displays.
The matrix master can switch every output channels to any HDMI inputs by push-in
button,Ethernet or RS-232 control.
Easy installation with rack-mounting and wall-mounting designs for master and receiver
respectively.
Fast channel switch response time.

~ 4 ~
Specifications & Package Contents
Model Name
AV-GM07N3-S1
Technical
Role of usage
True 36x36 matrix
HDMI compliance
HDMI Deep Color & full 3D
HDCP compliance
Yes
Video bandwidth
Single-link 225MHz [6.75Gbps]
Video support
480i / 480p / 720p / 1080i / 1080p60 12-bit color
Audio support
Surround sound (up to 7.1ch) or stereo digital audio
ESD protection
[1] Human body model —±19kV [air-gap discharge] & ±12kV [contact
discharge]
[2] Core chipset —±8kV
PCB stack-up
multi-layer board [impedance control —differential 100; single 50]
Input
36x HDMI + 1x RS-232 + 2x RS485 + 1x LAN + 1x USB + 1x IR
Output
36x HDMI
HDMI Input
selection
Push button / RS-232 / LAN
HDMI connector
Type A [19-pin female]
RS-232 connector
DE-9 [9-pin D-sub female]
DIP switch
Use for RS232 interface
Mechanical
Housing
Metal enclosure
Dimensions
(L x W x H)
Model
440 x 424 x 175mm [1’5” x 1’5” x 7”]
Package
572 x 607 x 330mm [1’11” x 2’ x 1’1”]
Weight
Model
15kg [33 lbs]
Package
16kg [35 lbs]
Fixedness
1U rack - mount with ears and wall hanging holes
Power supply
AC Power 100-240V
Power consumption
116 Watts [max]
Operation
temperature
0~40C [32~104F]
Storage temperature
-20~60C [-4~140F]
Relative humidity
20~90% RH [no condensation]
Package Contents
1x AV-GM07N3-S1
2x Rack-mounting ears
1x User Manual
1x UL AC power cord

~ 5 ~
Front Panel
1. Input selection group: Input channel selection.
2. Output selection group: Output channel selection.
3. Power: Power on/off switcher.
4. Function Keys: Input/Output mode select & Save/Load channel status & EDID setting
buttons.
Panel Descriptions

~ 6 ~
Rear Panel
5. HDMI Input: HDMI input port.
6. HDMI Output: HDMI output port.
7. RS-232: Serial control.
8. Dip switch: RS-232/485 control switch.
9. RJ-45: LAN(Ethernet) control.
10. USB: USB Type-B (RS232 interface) control.
11. RS-485: Far distance RS232 control interface.
RJ45: pin1 –485 TX-B
pin2 –485 TX-A
pin3 ~ pin6 –GND
pin7 –485 RX-A
pin8 –485 RX-B
12. Power: Connect power core.

~ 7 ~
Note :
RS232 Control: The USB, RS232 and RS485 ports share one UART port.
The priority of USB, RS232, and RS485 is as below:
USB port > RS232(RS485)
For example, if you connect USB line from control source, the RS232(RS485) port
will be useless. This also means that if you want to use RS232 or RS485 port to
control device, the USB port can’t be connected.
However, RS232 or RS485 can be selected by the DIP switch.
DIP switch OFF(Down) : RS232.
DIP switch ON(Up) : RS485.
Besides, if you want to control from USB port, please install the driver into your
control source like PC.

~ 8 ~
HDMI 36 x 36 Matrix Button Examples
Button Control Path: 1 –Host Button 2 –Software
#Firmware Update Module
Update .hex file
Step1: The 36x36 matrix maintain power off status.
Step2: Connect the 36x36 matrix and the PC with Ethernet interface.
Step3: Open PC TCP/IP setting
Channel Control
Output Region
Input Region

~ 9 ~
If your PC network domain is 192.168.1.XXX(XXX is from 1~255, 233 is not included), you can set
TCP/IP like this.
If your PC network domain is not 192.168.1.XXX, please “directly”connect your PC and ASP-3636
with a LAN cable and set IP like this.
1~255 except 233

~ 10 ~
Step4: Open the software.
Step5: Press Firmware Update button.
Step6: Load .hex file and press start.
ASP-3636 IP

~ 11 ~
Step7: Power on the AV-GM07N3-S1
Step8: Please reset the 36x36 matrix when firmware update finished.
**1. The 36x36 matrix .hex firmware update IP is fixed. 192.168.1.233.
Please confirm the PC is the same network domain as the 36x36 matrix.
2. Sometimes the .hex firmware update can’t start or interrupt in the processing, please retry
again.
Update .bin file
Step1: The 36x36 matrix maintain power on status.
Step2: Connect the 36x36 matrix and the PC with RS232 interface.
Step3: Open the software and select the COM port to connect.

~ 12 ~
Step4: Press Firmware Update button.
Step5: Load .bin file and start to update.

~ 13 ~
Step6: Please reset(power off then power on) the 36x36 matrix when firmware update finished.
#Observe output status
Step 1: Press output button, if output button light, you can skip this step.
Step 2: Press output button X, if output region X light, you can skip this step.
Output 1 <-> Input 1
Output 5 <-> Input 5

~ 14 ~
Output 9 <-> Input 9
#Set different input to specific output
Now status: Input 1 <-> Output 1
Input 2 <-> Output 2
Desired status: Input3 <-> Output 1
Input 4 <-> Output 2
Step 1: Press output button, if output button light, you can skip this step.
Step 2: Press output region 1, if output region 1 light, you can skip this step.
Output 1 <-> Input 1

~ 15 ~
Step 3: Press input region 3, if input region 3 light, you can skip this step.
Output 1 <-> Input 3
Step 4: Press output region 2, if output region 2 light, you can skip this step.
Output 2 <-> Input 2
Step 5: Press input region 4, if input region 4 light, you can skip this step.
Output 2 <-> Input 4

~ 16 ~
#Observe input status
Step 1: Press input button, if input button light, you can skip this step.
Step 2: Press output button X, if output region X light, you can skip this step.
Input 4 <-> Output 2

~ 17 ~
Input 7 <-> Output 7
Input 8 <-> Output 8
#Set different outputs to the specific input
Now status: Input 24 <-> Output 24
Input 7 <-> Output 7
Desired status: Input 24 <-> Output 11, 12, 13, 14, 15
Input 7 <-> Output 16, 17, 18
Step 1: Press input button, if input button light, you can skip this step.

~ 18 ~
Step 2: Press input region 24, if input region 24 light, you can skip this step.
Input 24 <-> Output 24
Step 3: Press output region 24, if output region 24 dim, you can skip this step.
Input 24 <-> Output None
Step 4: Press output region 11, if output region 11 light, you can skip this step.
Input 24 <-> Output 11

~ 19 ~
Step 5: Press output region 12, if output region 12 light, you can skip this step.
Input24 <-> Output 11, 12
Step 6: Press output region 13, if output region 13 light, you can skip this step.
Input 24 <-> Output 11, 12, 13
Step 7: Press output region 14, if output region 14 light, you can skip this step.
Input 24 <-> Output 11,12,13,14
Step 8: Press output region 15, if output region 15 light, you can skip this step.
Input 24 <-> Output 11, 12, 13, 14, 15