Silver Cross REFLEX User manual

IMPORTANT: KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE
Reflex

2
Warranty
All Silver Cross products are guaranteed
for a period of 36 months against faulty
workmanship, when the product is used
correctly according to the instruction
manual.
Garantie
Tous les produits Silver Cross sont garantis
pour une période de 36 mois contre tout
défaut de fabrication, si le produit est utilisé
conformément au manuel d’instructions.
Garantía
Todos los productos de Silver Cross incluyen
una garantía de 36 meses contra defectos
de fabricación, siempre que el producto se
utilice correctamente de acuerdo con el
manual de instrucciones.
Garanzia
Tutti i prodotti Silver Cross sono garantiti
per un periodo di 36 mesi contro difetti di
fabbricazione, purché il prodotto venga
utilizzato correttamente, in conformità al
manuale delle istruzioni.
Garantie
Für alle Produkte von Silver Cross besteht
für den Fall von Herstellungsmängeln eine
Garantie von 36 Monaten, sofern das Produkt
sachgemäß wie in der Bedienungsanleitung
angegeben gebraucht wurde.
Garanti
Alla Silver Cross-produkter har 36 månaders
garanti som gäller tillverkningsfel förutsatt
att produkten har använts korrekt i enlighet
med bruksanvisningen.
Гарантия
На всю продукцию Silver Cross
действует гарантия сроком 36 месяцев,
покрывающая случаи производственного
брака, при условии использования
изделия в соответствии с инструкциями.
保修
在依据说明书正确使用产品的情况下，所有
Silver Cross产品对工艺质量问题保修期为
36个月。
保養期
所有 Silver Cross 產品均可享有36個月保
養期，提供在按照指引說明書正確使用下的
工藝缺憾保養。

Silver Cross


3
silvercrossbaby.com
These instructions are
important.
Read these instructions carefully before
use and keep them for future reference.
Your child’s safety may be aected if you
do not follow these instructions.
Your Reex pushchair is a high quality
Silver Cross product. It meets current
safety standards and care and regular light
maintenance will ensure long service.
This vehicle is intended for children from
birth to 25kg. If somebody unfamiliar is
using your Reex pushchair always ensure
that they read these instructions carefully
so that they understand how the product
works best. Always read all the instructions
provided carefully and remember, the
safety of your child is your responsibility.
WARNING: NEVER LEAVE YOUR
CHILD UNATTENDED.
Contents
Your Reex pushchair includes the
following components, please check that
you have all the items before proceeding:
1.1 Reex Pushchair Chassis,
Seat Fabrics and Basket
1.2 Reex Hood
1.3 Reex Raincover
1.4 Reex Front Wheel Assembly x2
1.5 Reex Bumper Bar
1.6 Reex Head Hugger
1.7 Reex Chest Pads and Crotch Pad
1.1 1.2
1.3
1.4 1.5
1.6 1.7

4
Assembling the Reex
2.1 Attach the swivel wheels by locating
the wheel under the steel attachment
pin. Slide the wheel upwards and
press until the wheel clicks into
position.
WARNING: CHECK
THE WHEEL IS SECURE
BY PULLING GENTLY
DOWNWARDS.
Repeat on both sides. Your Reex is
now ready to be unfolded.
2.2 Locate the locking catch on each side
of the pushchair and lift to release
from the locking stud.
2.3 Allow the pushchair to open by lifting
the handles upwards and the wheels
will naturally fall to the oor.
2.1
2.3
2.2

5
silvercrossbaby.com
Assembling the Reex
(continued)
2.4 Finally, press down gently upon
the rear locking catch, positioned
between the rear wheels, to lock your
pushchair.
WARNING: FAILURE TO DO
THIS WILL CAUSE DAMAGE
TO YOUR PUSHCHAIR.
Place the pushchair on a at surface
and ensure that the pushchair moves
freely.
2.5 To t your Reex hood, locate the
clips on the hood. Now attach the
hood to the Reex chassis by sliding
clips over the hood connection
bracket. A positive engagement
should be ensured.
2.6 Connect the fabric of the hood
to the fabric of the seat with two
press studs, one on each side of the
pushchair.
2.7 Connect the fabric of the hood to
the rear leg of the chassis with two
press studs, one on each side of the
pushchair.
2.4
2.5
2.6 2.7

6
Assembling the Reex
(continued)
2.8 Your Reex hood can be opened and
folded by pulling the hood forward
or pushing backwards on the hood
frame. Your hood can also be
extended forwards by unzipping zip
as shown in diagram 2.8. Please note
when folding your Reex pushchair
you should always ensure the hood
is folded away. Failure to do this
could result in damage to your Reex
pushchair.
2.9 Your Reex pushchair has a multi-
position calf support. Locate the
adjustment levers either side of the
calf support. Pull levers towards you
and adjust to the required position.
2.8
2.9

7
silvercrossbaby.com
Reclining the Reex
3.1 Your Reex pushchair has a multi-
position recline.
3.2 First, locate the backrest adjustment
mechanism at the rear of the seat.
Pull up the recline lever and gently
lower to the desired position.
3.3 To raise the backrest locate the
recline lever and pull up gently into
the desired position. The backrest will
rise to the desired height.
NOTE: The backrest should always be
in the upright position and the hood
folded away prior to folding.
3.1
3.2
3.3

8
Using the Harness
The harness is a ve point system
consisting of shoulder straps, waist straps
and crotch strap. Before you use the
pushchair, the harness must be adjusted
to suit the size of the child.
4.1 It is very important that you make
sure the shoulder straps are the
correct height for your child. The
shoulder straps should be level or just
below your child’s shoulders.
In a safe and secure environment,
place your child in the pushchair
with the backrest upright and assess
which of the three shoulder strap
height positions is most suitable for
your child.
NOTE: Winter/Summer clothing can
make a dierence to the size of your
child.
WARNING: NEVER LEAVE
YOUR CHILD UNATTENDED
DURING THIS PROCESS.
REMOVE YOUR CHILD WHILST
THE ABOVE ADJUSTMENTS ARE
BEING MADE.
4.1

9
silvercrossbaby.com
Adjusting the Reex handles
5.1 Your Reex features 3-position
adjustable handles. The desired
position can be selected by depressing
the button shown and either pulling
up or pushing down the handles.
5.1

10
6.1 Adjusting the harness
6.1 Your Reflex pushchair has a multi-
position height adjustment for the
harness. To adjust the shoulder strap
height, start by disconnecting the
shoulder clips from the waist clips.
6.2 Pass one of the shoulder clips
through the button hole on the cover
and backrest. Once the clip is fully
through to the opposite side of the
backrest, pass it back through the
desired slot. Repeat these steps for
the other shoulder clip, ensuring that
the selected button holes are in line.
6.2

11
silvercrossbaby.com
Adjusting the harness
WARNING: ALWAYS ENSURE
PLASTIC TOGGLES ON
SHOULDER AND WAIST STRAPS
ARE SECURELY AND CORRECTLY
LOCATED INTO BACKREST.
7.1 Plastic toggles must always be
located correctly into backrest.
They do not need to be removed to
adjust harness.
7.2 If, for any reason, toggles are
removed, they can be re-located
by pushing into the hole on the
backrest, ensuring 2 prongs click into
place securely.
7.1
7.2

12
Adjusting the harness
WARNING: ALWAYS ENSURE
BUCKLE TOGGLE IS SECURELY
AND CORRECTLY LOCATED
INTO SEAT.
Buckle strap must always be located
correctly into seat. It does not need
to be removed to adjust harness.
NOTE: The buckle is not removable on
some models.
8.1 If, for any reason, the buckle strap
is removed, it can be re-located by
pushing through both the buttonhole
on seat fabric and buttonhole on
seat substructure.
8.2 Ensure the buckle strap goes through
both layers of fabrics.
8.3 Your harness is fully adjustable by
moving the sliders (A), to make
tting easy. Normally, each shoulder
strap is adjusted to the same length
as the waist straps.
‘D’ rings are provided for tting a
separate harness if required (B),
complying with BS 6684. Your child
should always be harnessed in and
should never be left unattended, even
for short periods of time.
8.1
8.2
BB
A
A
A A
8.3

13
silvercrossbaby.com
Using the harness
Attach and release the buckle as
necessary to facilitate harness
adustment and checking the harness
tightness.
WARNING: ALWAYS USE
THE CROTCH STRAP IN
COMBINATION WITH THE
WAIST BELT.
9.1 Start by connecting shoulder clips to
waistclips.
9.2 To fasten the harness insert the pairs
of clips into each side of the buckle.
Listen for the ‘click’.
9.3 Pull sliders in one direction to length
the strap
9.4 Pull slider in oppossite diection to
shorten strap
WARNING: ALWAYS USE
THE RESTRAINT SYSTEM. TO
RELEASE THE HARNESS, PRESS
THE CENTRE AND PULL APART.
THE SHOULDER CLIPS CAN BE
DETACHED FROM THE WAIST
CLIPS IF REQUIRED.
9.1
9.2
9.3
9.4

14
Harness tightness
It is important to ensure that your child
is securely fastened into the harness by
assessing the tightness of the straps.
10.1 You should only be able to insert 2
ngers between the shoulder straps
and the waist straps.
NOTE: Winter/Summer clothing can
make a dierence to the size of your
child.
10.1

15
silvercrossbaby.com
Attaching the head-hugger
11.1 To attach the head-hugger, thread
the harness through the buttonholes
relative to the size of your child.
11.1

16
Using the brakes
12.1 Your Reex pushchair has a parking
brake. To apply the brake simply press
downwards on either brake catch
located on the rear wheels.
The brake will automatically lock on
both wheels simultaneously.
WARNING: PLEASE ENSURE
BOTH BRAKE LEVERS ARE
LOCKED IN POSITION
SECURELY.
12.2 To release the parking brake simply
lift either brake catch and both
catches will release simultaneously.
NOTE: Always apply brake when
placing and removing your child.
12.1
12.2

17
silvercrossbaby.com
Using the wheel locks
13.1 Your Reex pushchair has front swivel
wheels. To lock your swivel wheels
locate the catch between the front
wheels. Press down in any position.
The wheels will automatically lock
when the wheels are rotated. Repeat
on each front wheels. To use the
wheels in swivel mode lift the locking
catch and the wheels will swivel
freely. Repeat on each wheel.
NOTE: Do not attempt to swivel the
wheels with the lock engaged as this
may damage the swivel lock.
13.1

18
Folding the Reex
NOTE: The backrest should always be
in the upright position and the hood
folded away prior to folding.
14.1 To start folding, locate the rear
locking catch (positioned between
the rear wheels) and lift upwards
with the toe of your shoe.
14.2 Now locate the secondary safety
catch located above the right hand
rear wheel. Gently press down until
the lock has released.
NOTE: Check there are no large rigid
items inside the basket before folding
as presence of such items may lead to
damage of the chassis.
14.1
14.2

19
silvercrossbaby.com
Folding the Reex (continued)
14.3 Push the handles forwards and the
pushchair will naturally close in three
dimensions to a compact size. Ensure
the two locking catches (located
either side of the pushchair) have
engaged.
14.4 Your Reex pushchair has a soft grip
carry handle on the right hand side.
WARNING: THIS HANDLE IS
THE ONLY POSITION FROM
WHICH YOU SHOULD LIFT
YOUR PUSHCHAIR TO AVOID
POSSIBLE DAMAGE.
14.3
14.4

20
Attaching the raincover
15.1 To attach your raincover locate guide
holes over handles, slide the cover
down over the chassis.
15.2 Fasten velcro handles to secure the
raincover.
15.3 Hook elastic loops either side of
raincover over plastic studs on
chassis.
Pull raincover down to the bottom of
the pushchair.
15.2
15.1
15.3