Silvercrest SPBD 5000 A1 User manual

POWER BANK SPBD 5000 A1
IAN 282713
POWER BANK
Operating instructions
DESIGN POWERBANK
Gebruiksaanwijzing
BATTERIE EXTERNE
POWERBANK DESIGN
Mode d‘emploi
DESIGN-POWERBANK
Bedienungsanleitung

GB/IE/NI Operating instructions Page 1
FR/BE Mode d’emploi Page 23
NL/BE Gebruiksaanwijzing Pagina 45
DE/AT/CH Bedienungsanleitung Seite 67
Before reading, unfold the page containing the illustrations
and familiarise yourself with all functions of the device.
Avant de lire le mode d’emploi, ouvrez la page contenant
les illustrations et familiarisez-vous ensuite avec toutes les
fonctions de l’appareil.
Vouw vóór het lezen de pagina met de afbeeldingen open
en maak u
vertrouwd met alle functies van het apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen
aus und machen Sie sich anschließend mit allen Funktionen
des Gerätes vertraut.

SPBD 5000 A1 GB│IE│NI │ 1 ■
Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Information about these operating instructions. . . . . . . . . . .3
Notes on trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Warning notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Basic safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Description of components . . . . . . . . . . . . . . . . . 9
Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Check package contents . . . . . . . . . . . . . . . . . . . . . . . . . 10
Disposal of the packaging . . . . . . . . . . . . . . . . . . . . . . . . 10
Charging the power bank . . . . . . . . . . . . . . . . . . . . . . . . 11
Checking the charge level . . . . . . . . . . . . . . . . . . . . . . . . 12
Handling and use . . . . . . . . . . . . . . . . . . . . . . . .13
Charging mobile devices with the power bank . . . . . . . . 13
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Storage when not in use . . . . . . . . . . . . . . . . . .15
Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Disposal of the device . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

SPBD 5000 A1
■ 2 │ GB│IE│NI
Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Notes on the EU Declaration of Conformity. . . . . . . . . . . 18
Kompernass Handels GmbH warranty . . . . . . . . . . . . . . 18
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Importer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

SPBD 5000 A1 GB│IE│NI │ 3 ■
Introduction
Information about these operating
instructions
Congratulations on the purchase of your new
device. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety, use and
disposal. Before using the product, please familiarise yourself
with all operating and safety instructions. Use the product
only as described and for the range of applications specified.
Retain these instructions for future reference. Please also pass
these operating instructions on to any future owner.
Notes on trademarks
USB®is a registered trademark of USB Implementers Forum, Inc.
All other names and products may be trademarks or regis-
tered trademarks of their respective owner.

SPBD 5000 A1
■ 4 │ GB│IE│NI
Intended use
This device is an information technology device and is intended
exclusively for charging mobile devices which are charged
via a USB port as standard. The device is not intended for
any other purpose, nor for use beyond the scope described.
The device is not intended for use in commercial or industrial
environments. The manufacturer accepts no responsibility
for damage caused by failure to observe these instructions,
improper use or repairs, unauthorised modifications or the
use of unapproved replacement parts. The risk is borne solely
by the user.
Warning notices
The following types of warning are used in these operating
instructions:
DANGER
A warning notice of this hazard level indicates
an imminently hazardous situation.
Failure to avoid this hazardous situation could result in
serious injuries or even death.
► Follow the instructions in this warning notice to avoid
the risk of serious injuries or death.

SPBD 5000 A1 GB│IE│NI │ 5 ■
CAUTION
A warning notice of this hazard level indicates
a risk of property damage.
Failure to avoid this situation could result in property damage.
► Follow the instructions in this warning notice to prevent
material damage.
NOTE
► A note provides additional information that makes
handling the device easier for you.

SPBD 5000 A1
■ 6 │ GB│IE│NI
Safety
This section contains important safety instructions for hand-
ling the device. This device complies with statutory safety
regulations. Improper use may result in personal injury and
property damage.
Basic safety instructions
■DANGER! Do not allow children to play with the
packaging material! Keep all packaging materials away
from children.
There is a risk of suffocation!
■ This device may be used by children aged 8 years and
above and by persons with limited physical, sensory or
mental capabilities or lack of experience and knowledge,
provided that they are under supervision or have been
told how to use the device safely and are aware of the
potential risks. Children must not play with the device.
Cleaning and user maintenance tasks may not be carried
out by children unless they are supervised.
■ Check the device for visible external damage before use.
Do not operate a device which has been damaged or
dropped.
■ Always place the device on a stable and level surface.
It can be damaged if dropped.

SPBD 5000 A1 GB│IE│NI │ 7 ■
■ Do not expose the device to direct sunlight or high tem-
peratures. Otherwise it may overheat and be irreparably
damaged.
■ Do not place the product near heat sources such as radia-
tors or other heat-generating devices.
■ Do not operate the device close to naked flames (e.g.
candles).
■ The device is not designed for use in rooms with high
temperatures or humidity (e.g. bathrooms) or where there
is excessive dust.
■ Do not expose the device to direct sunlight or high tem-
peratures and do not cover it during charging. Otherwise
it may overheat and be irreparably damaged. This par-
ticularly applies to storage in a car. Extreme temperatures
can occur in car interiors and glove compartments during
long periods of immobilisation. Remove electrical and
electronic devices from the vehicle.
■ Do not use the device immediately after moving it from a
cold room to a warm room. Always allow the device to
acclimatise before turning it on.
■ Never open the device housing.
None of the components in the device can be serviced or
replaced by the user.
■ Do not make any unauthorised modifications or altera-
tions to the device.

SPBD 5000 A1
■ 8 │ GB│IE│NI
■ All repairs must be carried out by authorised special-
ist companies or by the customer service department.
Improper repairs may put the user at risk. It will also
invalidate any warranty claims.
■ Do not expose the device to water spray or dripping
water, and do not place liquid-filled objects such as
vases or open drink containers on or near the device.
■ Turn the device off immediately and disconnect any con-
nected charging cables from the device if you smell
fumes or notice any smoke. Have the device checked
by a qualified specialist before using it again.
■ If you are using a USB power supply, the socket you use
must always be easily accessible so that the USB power
supply can be quickly disconnected from the socket in
a hazardous situation. You should also observe the
operating instructions for the USB power supply.
■DANGER! Improper use of the batteries can cause
fires, explosions, leakages or other hazards! Do not throw
the device into a fire as the integrated battery could
explode.

SPBD 5000 A1 GB│IE│NI │ 9 ■
■ Note any restrictions or prohibitions on use for battery-
powered appliances in locations with specific hazard
risks, such as petrol stations, aeroplanes, hospitals, etc.
Description of components
(See fold-out page for illustrations)
Power Bank SPBD 5000 A1 (model example)
micro-USB charging port (IN)
Charge level LEDs
USB socket (OUT)
ON/OFF button (ON/OFF)
Charging cable (USB to micro-USB)
Operating instructions (symbol image)

SPBD 5000 A1
■ 10 │ GB│IE│NI
Use
Check package contents
(See fold-out page for illustrations)
The product includes the following components:
▯ Power Bank SPBD 5000 A1
▯ Charging cable
▯ These operating instructions
♦ Remove all parts of the device from the packaging and
remove all packaging materials.
NOTE
► Check the package for completeness and for signs of
visible damage.
► If the delivery is incomplete or damage has occurred
as a result of defective packaging or during transport,
contact the Service hotline (see section Service).
Disposal of the packaging
The packaging protects the device from damage
during transport. The packaging materials have
been selected for their environmental friendliness
and ease of disposal and are therefore recyclable.

SPBD 5000 A1 GB│IE│NI │ 11 ■
Returning the packaging to the material cycle conserves raw
materials and reduces the amount of waste which is gener-
ated. Dispose of packaging materials which are no longer
needed in accordance with applicable local regulations.
Charging the power bank
Before using the power bank, the integrated battery must be
fully charged.
CAUTION
► Due to the high battery capacity and bearing in mind
the charging time, the power bank must be charged
using a USB mains adapter.
► Use only a USB mains adapter with an output voltage
of 5V and an output current of at least 2.1A to charge
the power bank.
► Charging takes about 3 hours.
♦ Connect the USB plug of the charger cable to a
suitable a USB power supply (not supplied).
♦ Connect the micro-USB plug on the charging cable to
the micro-USB charging port (IN) on the power bank.
The current charge level is shown during charging by
means of the charge level LEDs :
LED display Charge level
One LED is flashing < 20%

SPBD 5000 A1
■ 12 │ GB│IE│NI
LED display Charge level
One LED is on, the second LED
is flashing 20–49%
Two LEDs are on, the third LED
is flashing 50–74%
Three LEDs are on, the fourth
LED is flashing 75–99%
All LEDs are on 100%
Checking the charge level
You can also check the charge level of the power bank when
it is not charged or while it is being used for charging.
♦ Press the ON/OFF button briefly. The charge level
LEDs show the current charge level of the power bank
for about 30 seconds.
LED display Charge level
All LEDs are on 100%
Three LEDs are on 75–99%
Two LEDs are on 50–74%
One LED is on 20–49%
One LED is flashing < 20%
All LEDs off 0%

SPBD 5000 A1 GB│IE│NI │ 13 ■
Handling and use
Charging mobile devices with the power
bank
♦ Connect the micro-USB plug on the charging cable
to the micro-USB port on the mobile device and the USB
plug to the USB socket (OUT) on the power bank. The
charging process starts automatically.
♦ If charging does not start automatically, press the ON/
OFF button briefly to start the charging process.
NOTE
► Alternatively, you can also use the original charging
cable (USB cable) provided by the respective device
manufacturer.
► Some devices cannot be charged due to the high start-
up charging current required (higher than 2.1 amps).
♦ During the charging process, the current Power Bank
charge level is shown via the charge level LEDs (see
table in section entitled "Checking the charge level").
♦ To stop charging, disconnect the charging cable from
the mobile device and the power bank. The charge level
LEDs switch off.

SPBD 5000 A1
■ 14 │ GB│IE│NI
Troubleshooting
The power bank does not charge
♦ Connection may be faulty. Check the connection.
A connected device will not charge
♦ The integrated battery is empty. Charge the battery.
♦ No connection to the device. Check the connection.
♦ Press the ON/OFF button briefly to start the charging
process.
♦ The charging current of the connected device is too low
(< 80 mA) or too high (> 2.1 A).
NOTE
► If you cannot solve the problem with the above-men-
tioned solutions, please contact the Service Hotline
(see section Service).

SPBD 5000 A1 GB│IE│NI │ 15 ■
Cleaning
CAUTION
Possible damage to the device.
There are no serviceable parts or parts requiring cleaning
inside the power bank. Moisture can cause damage to the
device.
► To avoid irreparable damage to the device, ensure that
no moisture penetrates the device during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning
materials. These can damage the surfaces of the
device.
♦ Clean the housing of the device with a lightly moistened
cloth and a mild detergent only.
Storage when not in use
♦ Store the device in a location which is clean, dry, dust-free
and not in direct sunlight.
♦ For long-term storage, the integrated battery should be
fully charged to extend its operating life.

SPBD 5000 A1
■ 16 │ GB│IE│NI
Disposal
Disposal of the device
The symbol shown on the left of a crossed-out
dustbin means that this device is subject to
Directive 2012/19/EU. This directive states that
this device may not be disposed of in normal
household waste at the end of its useful life, but must be
brought to a specially set-up collection point, recycling depot
or disposal company.
This disposal is free of charge for the user.
Protect the environment and dispose of this
device properly.
You can obtain further information from your local disposal
company or the city or local authority.

SPBD 5000 A1 GB│IE│NI │ 17 ■
Appendix
Technical data
Integrated battery
(lithium-polymer)
3.7 V / 5000 mAh
(18.5 Wh)
Input 5V ,2.1A
Output 5V ,2.1A
Minimum discharge
current 80 mA
Charging time approx. 3 hours
Working temperature 5°C to 35°C
Storage temperature 0°C to 45°C
Relative humidity
(no condensation) 10%–70%
Dimensions approx. 9.3 x 6.3 x 1.5 cm
Weight approx. 115g