Simons Voss Technologies ALLEGION 3060 Series User manual

Manual 3060 System
State of: July 2007
SimonsVoss Technologies AG •Feringastraße 4 •85774 Unterföhring •Germany
Hotline 01805-SV3060 •FAQs www.simons-voss.de
Telefon [phone] •Fax [phone]
If the contents of the foreign language version of the documentation differ from the contents of the original German version,
the original German version shall apply in case of doubt. We reserve the right to make technical changes.

Table of Contents
Version: March 2008

Table of Contents
Seite 2
P PEOPLE TO CONTACT
Sales
Technical
Address in Munich
D DIGITAL LOCKING SYSTEM 3060
General method of operation
The components
Access control, time zone administration
T TRANSPONDER 3064
Method of operation
Loss of a transponder
Password-protected transponder
Q BIOMETRIC TRANSPONDER Q3007
Method of operation
Learn-mode
Recognize-mode
Deleate-mode
BIOMETRIC READER Q3008
Method of operation
Learn-mode
Recognize-mode
Deleate-mode
PINCODE-KEYPAD 3068
Method of operation
Initiation
Programming
Battery warning
V DIGITAL LOCKING CYLINDER 3061
VDS (TN3)
Method of operation
Installation instructions
Battery warning, battery replacement

Table of Contents
Seite 3
DIGITAL LOCKING CYLINDER 3061
(TN4)
Method of operation
Installation instructions
Battery warning, battery replacement
H DIGITAL HALF CYLINDER 3061
(TN3)
Method of operation
Installation instructions
Battery warning, battery replacement
DIGITAL HALF CYLINDER 3061
(TN4)
Method of operation
Installation instructions
Battery warning, battery replacement
R DIGITAL SMART RELAY 3063
Installation
Connections
Programming
SMART OUTPUT MODULE
Installation
Connections
Programming
SHUNT LOCK FUNCTION 3066
Activation unit
Deactivation unit
Installation and connecting plan
E SHUNT LOCK FUNCTION 3066 VDS
Master activation unit
Slave activation unit
Deactivation unit
VdS-compliant installation

Table of Contents
Seite 4
WAVENET RADIO NETWORK
Components
Structure
Installation
N LON NETWORK 3065
Network configuration
Components
Installation
M PROGRAMMING TRANSPONDER 3067
Backup card
Error messages
Programming
P PALM CD2
Initiation
Export and import
Programming
SMART CD
Initiation
Export and import
Programming +65
K KEY
Explanation of technical terms
Special Symbols

People to contact
Version: September 2006

People to contact
Page 2
SALES
If you have any questions please contact our specialist dealers, or the sales
representative responsible for your region. You can obtain information concerning the
responsible contact at the following telephone number.
[phone]
United Kingdom
SimonsVoss Technologies Ltd.
Mr. Oliver Quaisser
44 Newton Court, Old Windsor
Berkshire SL4 2SN
Great Britain
Tel. +44 / (0)1753 / 85 98 44
Fax +44 / (0)1753 / 83 17 03
Email: [email protected]
Singapore and Asia
SimonsVoss Security Technologies (Asia) Pte. Ltd.
Mr. Jason P. Kurek
72 B Pagoda Street
Republic of Singapore 059231
Tel. [phone]
Fax [phone]
Email: [email protected]
Middle East
SimonsVoss Technologies (Middle East) FZ-LCC
Dubai Internet City
P.O. Box 500188
Dubai, UAE
Tel. [phone]
E-Mail: [email protected]
Headquaters Munich
SimonsVoss Technologies AG
Feringastraße 4
85774 Unterföhring
Germany
Tel: [phone]
Fax [phone]
www.simons-voss.com

Digital Locking System 3060
State of: June 2006

Digital Locking System 3060
Register
1.0 General Method of Operation ___________________________3
2.0 The Components of the Digital Locking and ________________
Organization System 3060______________________________3
2.1 Software LDB ___________________________________________ 3
2.2 Programming ___________________________________________ 4
2.3 Digital Locking Cylinder 3061 ______________________________ 4
2.4 Digital Smart Relay 3063 __________________________________ 4
2.5 Transponder 3064________________________________________ 4
2.6 Network 3065____________________________________________ 5
2.7 Block Lock Function 3066 _________________________________ 5
3.0 Digital Components With Access Logging and _____________
Time Zone Control ____________________________________5
3.1 Access Logging _________________________________________ 5
3.2 Time Zone Control _______________________________________ 6

Digital Locking System 3060
Page 3
1.0 General Method of Operation
The Digital Locking and Organization System 3060 is modularly constructed and is
suitable for uses ranging from a simple locking system for individual doors all the way
to a complex PC-controlled access control system. Conventional mechanical keys are
replaced by the programmable transponder, which controls doors, gates, barriers,
furniture and elevators, for example, over radio transmission. Each transponder is
programmed individually for the locking system. The access authorisations are
assigned by means of the locking plan. This makes it possible to provide each
employee with an individual locking plan with access control and time zone control.
The identification in the system and the radio transmission are done by sending and
receiving constantly changing crypto codes, thus making the misuse of the system
technically practically impossible. Modifications or expansions of the system at a later
date are always possible.
2.0 The Components of the Digital Locking and
Organization System 3060
2.1 Software LDB
The locking plan software runs under Windows 98, Windows ME, Windows NT/2000
and Windows XP. All components can be programmed as required using the locking
plan software. One locking plan can contain a maximum of 16,386 lockings and 8000
transponders. For even larger locking systems, the lockings and transponders are
distributed among several locking plans. The locking authorisations are assigned by
simply clicking with the mouse. As a result, later modifications are possible with no
trouble.
☺A detailed description is to be found in our Software Operating Instructions!

Digital Locking System 3060
Page 4
2.2 Programming
You will need the SmartCD and a PDA for programming the digital
components. The data is encoded and then transmitted to the digital
components via radio signal.
Another possibility for programming a Digital Locking Cylinder 3061 and
Transponder 3064 is with the Programming Transponder 3067. For
example, you can issue or change access authorizations in small
systems by simply pressing a button when you lose a key or change the
locking plan. No PC or special system software is needed.
2.3 Digital Locking Cylinder 3061
The Digital Locking Cylinder 3061 is a compact, powerful
access control system that can be installed in any door in
only minutes. Its dimensions correspond to those of an
ordinary mechanical cylinder that meets the norms.
Because the Digital Locking Cylinder 3061 has batteries
(master and backup batteries), it can be installed without
wires in all Euro Profile doors and can replace already
existing
mechanical cylinders. A drop in the battery voltage is indicated by a multilevel
warning system (service life approximately 60,000 operations).
2.4 Digital Smart Relay 3063
The SimonsVoss Smart Relay is an electronic switch that can be
switched with a SimonsVoss transponder. You can use the
SimonsVoss software to configure the authorisation for transponders
that are permitted to operate the Smart Relay. In this way, the Smart
Relay offers the full function of an access control reader.
2.5 Transponder 3064
The Transponder 3064 is a digital key that can be programmed
using SimonsVoss software and that works by radio transmission,
without contact. It not only replaces mechanical keys, but also takes
over the function of identity cards. Simply pressing a button triggers
the encoded communication between the transponder and locking

Digital Locking System 3060
Page 5
cylinder, Smart Relay or activation unit.
2.6 Network 3065
The cable-free Network 3065 is an online access control system that administers,
visualises and archives all System 3060 information in one central location, and all
without manipulations at the door, door frame or the door hardware.
It is especially recommended for medium-sized and large locking systems in order to
be able to configure and administer the locking system from a central PC. The LON
standard data transmission is done from the PC over the network wiring (twisted pair)
and out to the network nodes (LockNodes), which are installed near a digital
component. From the LockNode, the data is directed without wires over radio
transmission to the digital unit.
☺While it is true that access to the network software is no longer possible if
there is a power failure (unless the network has been protected by a no-break
power supply), however, all of the locking system’s components that are
equipped with a battery still function.
2.7 Block Lock Function 3066
SimonsVoss has the Block Lock Function 3066 in its product line as an option of the
Digital Locking and Organization System. This function offers the possibility of
activating your alarm system from a central point while at the same time preventing
the monitored doors from being accidentally opened during this time. This rules out
annoying and expensive false alarms right from the start.
The Block Lock Function 3066 is also available as a VdS version.
3.0 Digital Components With Access Logging and
Time Zone Control
3.1 Access Logging
The Plus versions of the digital locking cylinder, SmartRelay and activation unit record
the access attempts of authorised transponders. The read-out of the access list from
the lockings is done using the SmartCD or, in the case of a networked locking
system, over the LockNodes.
A total till 128 accesses (with Smart Relay 1.024), with date, time of day and
transponder designation can be stored in the access lists of the separate
components. After that, the complete file isn’t deleted, but instead the oldest access is
always overwritten with the new one.

Digital Locking System 3060
Page 6
After the access list has been read out with the programming device or network
nodes, it is imported into the PC and administered there by the locking plan software.
A total of 10,000 accesses can be stored in the PC file. When the data is accepted
from the programming device, a comparison is done so that it is always only the
current, new accesses that are accepted into the PC file.
3.2 Time Zone Control
You can program lockings in such a way that authorised transponders are authorised
for access only at certain times.
Transponders normally have no time restrictions, i.e., that are always authorised for
locking 7 days a week, 24 hours a day. However, you can assign transponders to
time groups so that they can open or lock at times that can be freely defined. There
are five different time groups available (for a more precise description, see the
Software Operating Instructions).
Example:
No time restrictions
Mo-Su, 24 hours
Mr. Lewis, Mr. Ludwig, Ms.
Gorges
Group 1 Mo – Fr, 7 am – 5
pm
Mrs.Schulz,Mr.Fichtel
Group 2 Mo – Fr, 9 am – 8 pm
Mrs. Miller, Mr. Karlsen, Mr. Waas
You can draw up an individual time zone plan for each locking.
It is not possible to equip a standard version with the access logging and time
zone control functions of the TZC-version at some later time.

Transponder 3064
State of: September 2006

Transponder 3064
Content
1.0 Method of Operation __________________________________3
1.1 General ________________________________________________ 3
1.2 Higher Priority Locking Level ______________________________ 4
2.0 Special Models _______________________________________5
2.1 Password Transponder ___________________________________ 5
2.2 Switching Transponder ___________________________________ 5
2.3 Explosion Protection Transponder__________________________ 5
3.0 Explosion Protection Transponder ______________________6
3.1 General Information ______________________________________ 6
3.2 Standards ______________________________________________ 6
3.3 Grouping _______________________________________________ 6
4.0 Additional Functions __________________________________7
4.1 Time Zone Control _______________________________________ 7
4.2 Validity Date ____________________________________________ 7
4.3 Activation Transponder ___________________________________ 7
5.0 Battery Replacement __________________________________8
5.1 Battery Replacement 3064 _________________________________ 8
5.2 Battery Replacement for the Explosion Protection Transponder _ 8
6.0 Loss of the Transponder _______________________________8
6.1 Emergency Opening ______________________________________ 8
6.2 Replacement Transponder ________________________________ 8
7.0 Data Sheet___________________________________________9

Transponder 3064
Page 3
1.0 Method of Operation
1.1 General
The Transponder 3064 is a digital “key” that is programmed with the locking plan
software and that works over radio transmission with no physical contact. All
functions, for example, opening and closing doors, gates, barriers, furniture locks,
etc., are carried out by pressing a button. Communication with the digital components
(cylinder, Smart Relay and activation unit) takes place by sending and receiving
constantly changing crypto codes, which makes misuse practically impossible.
Since the System 3060 works with active transponder technology, the transponder
has its own voltage source (battery) available. The advantage in comparison to
passive technologies lies in the smaller energy requirements of the cylinder and the
larger range.
In order to trigger an action, hold the transponder near the digital locking (refer to the
separate chapters for information on maximum transponder ranges) and then press
the transponder button. Provided that the transponder is authorised for this digital
locking, the desired action, for example, opening or locking the door, can be carried
out.
The housing of the transponder is protected against splash water. However it is not
waterproof!
Each transponder can be used in three different, mutually independent locking
systems (assuming that no validity areas were programmed). Each locking system
has its own password and is administered separately.
Example:
Company Branch Private home
900 lockings 85 lockings 3 lockings

Transponder 3064
Page 4
1.2 Higher Priority Locking Level
If it is necessary to have transponders that are authorised for more than 3 mutually
independent locking systems, “higher priority locking levels” must be set up in these
locking systems. There are a maximum of 3 higher priority locking levels available for
this. All transponders of a higher priority locking level have the same authorisation.
One digital locking distinguishes between a maximum of three higher priority levels.
Example:
Higher priority transponder
Four companies are accommodated in an office building with a central locking that is
used by all the companies. Each company administers its own locking system with its
own password. Every employee receives a transponder that is authorised for 2
locking systems, namely the central locking und his or her own company.
However, the fire brigade, for example, needs a transponder that is authorised for all
five of the building’s locking systems. To accomplish this, a higher priority locking
level with the same separate password must be set up in all five locking systems and
the authorisations must be set up for the higher priority transponders. The
transponders set up in this level all have the same authorisation. If higher priority
transponders with other authorisations are required, an additional higher priority
locking level must be set up (max. 3 higher priority locking levels per locking!). The
higher priority transponder must then be programmed into all shutdowns of all 5
locking systems.
Company D
Company C
Company B
Company A
Central
locking
system

Transponder 3064
Page 5
2.0 Special Models
2.1 Password Transponder
Instead of manually entering the locking system password, you can transmit it over
radio frequency with the help of a special transponder. Standard transponders cannot
be used as password transponders.
2.2 Switching Transponder
With this transponder, a two-wire cable (approx. 1m or 37 inches) is connected to the
switch contacts of the button and guided outside the device. When both wires are
connected, the transponder switches through.
Application examples:
•Connecting external systems
•Remote triggering of a Digital Locking Cylinder or Smart Relay
•Block Lock Function 3066: System activation from more than one location
2.3 Explosion Protection Transponder
This is a transponder with the same functions as the Transponder 3064. In addition,
this transponder is released for use in explosion protection zone 1.
(Note Chapter 3 in this regard).
2.4 SmartClip
The special design of this transponder means that the SmartClip is suitable for
holding an ISO 7816 format card.
2.5 Transponder, bonded
The standard transponder as described above, but with a glued-shut casing. This
prevents end-users from opening the case and using the transponder electronics
improperly.
2.6 Transponder, numbered
Sequentially numbered transponders can also be ordered if required.

Transponder 3064
Page 6
Explosion Protection Transponder
2.7 General Information
This special product is a transponder that is permitted to be carried into and used in
areas subject to explosion hazards, called Zone 1. An area is denoted as Zone
1 when atmospheres capable of exploding occur occasionally. It is crucial that you
keep in mind the following issues:
•You are not permitted to open the housing.
•Unlike with the Transponder 3064, only SimonsVoss Technologies AG is
permitted to change the battery.
•Normally, you must comply with the general operating instructions of the
BGR132 (German rules for occupational safety and health) when using the
device in Zone 1.
3.2 Standards
The transponder has been tested according to the applicable explosion protection
standards. Refer to:
•Directive 94/9/EC
•DIN EN 50014 (Electrical apparatus for potentially explosive atmospheres)
•DIN EN 50020 (Intrinsic safety "i")
3.3 Grouping
The transponder is grouped in the following way:
•Explosion protection: zone 1
•Intrinsic safety: ib
•Explosion group: IIC
•Temperature class: T3
•Device group: II2 G
This applies to areas in which a potentially explosive atmosphere can arise due to
gases, vapours or mists. The information quoted relates to an ambient temperature of
from -20°C to +40° C (-4° F to +104° F) in the place of use.

Transponder 3064
Page 7
3.0 Additional Functions
The following functions can be activated in the locking plan software:
3.1 Time Zone Control
For TZC version digital lockings, you can program transponders that have locking
authorisation for specific times only. These time zones are deposited in the locking
plan software, and the transponders are then assigned to an appropriate time zone
group.
Example: Mr. Miller receives the following authorisation:
Monday to Friday from 9:00 am, until 6:30 p.m.
Saturday from 9:00 am, until 12:45 p.m.
Sunday no authorisation
3.2 Validity Date
It is possible to program transponders whose authorisation is tied to a validity date
(this also applies to non-TZC-versions):
¾Transponders that are valid from a specific point in time
(e.g., from 8:00 a.m. on July 12, 2003
¾Transponders that are valid up to a specific point in time
(e.g., until 5:00 p.m. on July 12, 2003
¾Transponders that are valid for a specific time interval
(e.g., from July 1, 2003 until July 31, 2003)
&One data record is assigned for each activation or expiry date!
3.3 Activation Transponder
Within the scope of the block lock function, all authorised transponders for a digital
locking in the security area are blocked when the alarm system has been activated in
order to avoid false alarms. For emergency situations, transponders can be
programmed (for example, for the fire brigade) that release this block. Afterwards, the
door can be opened with an authorised transponder.