SMART Board 690 User manual

1
7 8 9
2 3 4
5 6
SB690-MP
SMART GoWire™ auto-launch cable
×2
#2
×2
×12 ×12
×2
690
85 3/4" (217.8 cm)
49 1/2"
(125.7 cm)
77 1/2"
(196.9 cm)
6" (15.3 cm)
SMART GoWire™ Auto-Launch Cable
(GW-MP, GW-MPP)
SBX800i4
SMARTGoWire™Auto-LaunchCable
(GW-MP,GW-MPP)
SBX800i4
LimitedEquipmentWarranty
Thankyouforyourrecentpurchase.Intheunlikely event that you have problems with your equipment, SMART’s technical support personnel
areavailabletoassistyou.Thetermsandconditionsof SMART’ s warranty are set forth below – please reviewthem carefully.Pleaseseethe
reversesideofthispageforwarranty-claimprocedures.
LimitedWarrantytoEnd-UserPurchaser
Subjecttotheexceptionsnotedbelow,this limited warranty (the “Warranty”)covers all defects in materials and workmanship of your new
SMARThardwareproduct,togetherwithincludedsoftwaredistributionmedia,pens,eraser and cables (the “Equipment”).SMART extends the
Warrantytotheend-userpurchaser(the“Purchaser”)oftheEquipment.
ThedurationoftheWarranty (the “Warranty Period”), commencing on the date of new purchase, is ONE YEAR for optional
accessories(includingroomcontrolmodules, wireless serial or USB connections, floorstands,speakers,cables,USB adapters,
keyboards,etc.)andservicerepairparts,withthefollowing exceptions:
FullydischargedSMARTSlate™lithiumionbatteriesarenotcoveredby warranty.
Projectorlamps(usedundernormalprojectoroperating conditions, not in excess of 8 hours per day and 260 days per year) are
coveredbywarrantyfor500hoursor90days, whichever comes first.
THEWARRANTYISINLIEUOFALLOTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
LIMITEDTOIMPLIEDWARRANTIESOFMERCHANTABILITYANDFITNESSFORA PARTICULAR PURPOSE. ANY REPRESENTATION
ORWARRANTY,ORAFFIRMATIONOFFACT,MADEBYANY SALES REPRESENTATIVE OR OTHER AGENT OF SMART, INCLUDING
BUTNOTLIMITEDTOSTATEMENTSREGARDINGCAPACITY, SUITABILITY FOR USE OR PERFORMANCE, EXPRESS OR IMPLIED,
WHICHISNOTSPECIFICALLYSETFORTHHEREINWILLNOTBE BINDING UPON SMART.
SMARThasnotauthorizedany other party to alter, modify, extend,enhance or limit the Warranty and SMART will not assume any
responsibilityorliabilityforanystatementsorrepresentationsmadebyanyother persons or entities.
RepairorReplace
ThePurchaser’sexclusiveremedyandSMART’ssole obligation duringthe Warranty Period shall be for SMART to repair or, at itsoption,
replacetheEquipmentthathasfailedorthathasproven to be defective at no cost to the Purchaser except for the one-way shippingcost of the
EquipmenttoaSMART-authorizedservice center. Any charges associatedwith a rush-requested order, such as air express, are the
responsibilityofthePurchaser.Priortoreturningany equipment under the Warranty, the Purchaser must render proof of the original
purchasedateandmustthereafterobtainfromSMARTaReturn of Merchandise Authorization (RMA) number. The RMA number shall
beclearlymarkedonthepackagingoftheEquipmentbeing returned.All returned Equipment that is replaced under the Warranty shall become
thepropertyofSMART.
LimitationofDamages
TheliabilityofSMARTtothePurchaserarisingoutofthe purchase and supplyoftheEquipmentoritsuse,whetherbaseduponWarranty,
contract,tort(including,withoutlimitation,negligence)orotherwise,shallnotin anycase exceed the original cost to thePurchaser of the
Equipment,anduponexpirationoftheWarrantyPeriodsuchliabilitywill terminate.
SMARTshallnotbeliable,whetherincontractoron any other basis, for any damagessustainedbythePurchaseroranyotherpersonarising
fromorrelatedtolossof use, failure or interruption in the operationof the Equipment, delay in repair or replacement or for incidental,
consequential,indirectorspecialdamagesorliabilities,lossof revenue, loss ofbusiness or other financial loss arising out of or in connection
withthesale,lease,maintenance,use,performancefailureorinterruptionof the Equipment.
WarrantyExclusions
TheWarrantywillnotapplytoandSMARTwillnot be liable for (i) any Equipment which is not purchased from an authorized SMARTdealer or
distributor;(ii)Equipmentthathasbeendamaged by accident, abuse, neglect, misuseorcauses other than ordinary use (see manuals that
shipwithEquipmentforfurtherdetail),includingthedirectapplication of any cleaning liquids, substances or abrasives to the hardware or onto
anydisplaysurfaceotherthanin accordance with the cleaning andcare instructions included in the User’s Guide for the Equipment;(iii)
Equipmentwhichhasbeenaltered,changed, serviced or repaired by anyone other than SMART-authorizedrepair personnel; or (iv)any
Equipmentonwhichtheserialnumberhasbeen defaced, modified or removed. Warrantyservice hereunder shall not operate to extendthe
originalWarrantyPeriod.TheWarranty excludesdamage incurred in shipment to or fromSMART. If the Equipment is received by the
Purchaserinadamagedcondition,the carrier and SMART must be notifiedimmediately. Purchaserslocated outside the U.S. or Canada
shouldinsteadcontactthecarrierandtheirSMARTdealeror distributor.
Third-PartyEquipmentWarrantyExtensionandException
ForequipmentsoldbySMARTto the Purchaserbut manufactured by a corporation other than SMART (such as wall-mounted cabinets,
carryingcasesandotherspecifiedcomponents),SMARTshallextendto thePurchaser, to the extent permitted, any and all applicablewarranty
provisionsprovidedtoSMARTbythe third-party manufacturer.The extension of any and all applicable third-party manufacturerwarranty
provisionsshallbeanexceptiontothisWarrantyandrepresentsSMART’s sole responsibility with respect to such equipment.
A B

Failure to follow the installation instructions shipped with your SMART product could result in personal injury and damage to the product.
Refer to the safety warnings and precautions published by the projector manufacturer. Do not stare (or allow children to stare) directly into the projector’s
beam of light.
Do not climb (or allow children to climb) on your SMART Board interactive whiteboard. Climbing on the product could result in personal injury and product damage.
Do not stand (or allow children to stand) on a chair to touch the surface of your SMART product. Rather, wall-mount the product at the appropriate height.
To reduce the risk of fire or electric shock, do not expose your SMART product to rain or moisture.
Two people are required to mount your SMART product because it may be too heavy for one person to safely maneuver.
Ensure that any cables extending across the floor to your SMART product are properly bundled and marked to prevent a tripping hazard.
Do not mount the SMART Board 690 interactive whiteboard on a floor stand.
WARNING
IMPORTANT You must connect the USB cable that came with your SMART Board interactive whiteboard to a computer that has a USB compliant port and that bears the USB
logo. In addition, the USB source computer must be compliant with CSA/UL/EN 60950 and bear the CE mark and CSA and/or UL Mark(s) for CSA/UL 60950.
This is for operating safety and to prevent damage to the SMART Board interactive whiteboard.
If your product requires replacement parts, make sure the service technician uses replacement parts specified by SMART Technologies or parts with the same
characteristics as the original.
10 11 12
SB690 SB690-MP
S
B
690
-MP
www.smarttech.com/support www.smarttech.com/contactsupport
99-00736-23 B0
*99-00736-23-B0*
Hardware environmental compliance
SMART Technologies supports global efforts to ensure that electronic equipment is manufactured, sold and disposed of in a safe and environmentally friendly manner.
Waste Electrical and Electronic Equipment Regulations (WEEE directive)
Waste Electrical and Electronic Equipment regulations apply to all electrical and electronic equipment sold within the European Union. When you dispose of any electrical
or electronic equipment, including SMART Technologies products, we strongly encourage you to properly recycle the electronic product when it has reached the end of its
life. If you require further information, please contact your reseller or SMART Technologies for information on which recycling agency to contact.
Restriction of Certain Hazardous Substances (RoHS directive)
This product meets the requirements of the European Union’s Restriction of Certain Hazardous Substances (RoHS) Directive 2002/95/EC. Consequently, this product also complies
with other regulations that have arisen in various geographical areas, and that reference the European Union’s RoHS directive.
Packaging
Many countries have regulations restricting the use of certain heavy metals in product packaging. The packaging used by SMART Technologies to ship products complies with
packaging laws.
China’s Electronic Information Products Regulations
China regulates products that are classified as Electronic Information Products (EIP). SMART Technologies products fall under this classification and meet the requirements for
China’s EIP regulations.
U.S. Consumer Product Safety Improvement Act
The United States has enacted the Consumer Product Safety Improvement Act which limits the lead (Pb) content in products used by children. SMART
Technologies is committed to complying with this initiative.
© 2009–2011 SMART Technologies ULC. All rights reserved. SMART Board, SMART GoWire, smarttech and the SMART logo are trademarks
or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries.All third-party product and company names may be
trademarks of their respective owners. Patent No. US5448263; US6141000; US6320597; US6326954; US6337681; US6741267; US6747636;
US7151533; US7289113; US7499033; US7626577; US7757001; US7687736; CA2058219 and CA2252302. Other patents pending. Contents
are subject to change without notice. 03/2011.
For cautions and warnings, see the SMART Board 600 and SBD600 Series Interactive Whiteboard Installation and User’s Guide (smarttech.com/kb/001414).
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.