SMART Board SB480iv2 User manual

SMARTBoard® iv2
interactive whiteboard system
SB480iv2 AND SBM680Viv2
CONFIGURATION AND USER’S GUIDE

smarttech.com/kb/170782
FCC warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Trademark notice
SMARTBoard, SMARTNotebook, smarttech, DViT, the SMART logo and all SMART taglines are trademarks or registered trademarks of
SMARTTechnologiesULC in the U.S. and/or other countries. BrilliantColor, DLP and TexasInstruments are trademarks of TexasInstruments. Windows and
InternetExplorer are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Apple, iMac, Macintosh, Mac, MacOS
and MacOSX are trademarks of Apple Inc., registered in the U.S. and other countries. Blu-ray is a trademark of the Blu-ray Disc Association. Crestron and
RoomView are either trademarks or registered trademarks of Crestron Electornics, Inc. in the United States and/or other countries. All other third-party product
and company names may be trademarks of their respective owners.
Copyright notice
© 2014SMARTTechnologiesULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or
translated into any language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to change
without notice and does not represent a commitment on the part of SMART.
This product and/or use thereof covered by one or more of the following U.S. patents.
www.smarttech.com/patents
10/2014

i smarttech.com/kb/170782
Important information
Before you install and use your SMARTBoard interactive whiteboard system, read and understand
the safety warnings and precautions in this user’s guide and the included important information
document. These safety warnings and precautions describe the safe and correct operation of your
interactive whiteboard system and its accessories, helping you to prevent injuries and equipment
damage. Ensure that your interactive whiteboard system is always being used correctly.
In this document, “interactive whiteboard system” refers to the following:
lSMARTBoard 480 interactive whiteboard, SMARTV30 projector, accessories and optional
equipment
OR
lSMARTBoard M600V series interactive whiteboard, SMARTV30 projector, accessories and
optional equipment
The projector included with your system is designed to work only with certain SMARTBoard
interactive whiteboard models. Contact your authorized SMART reseller (smarttech.com/where) for
more information.
Safety warnings, cautions and important
information
Installation
WARNING
lFailure to follow the installation instructions shipped with your SMART product could result in
personal injury and damage to the product.
lTo reduce the risk of fire or electric shock, do not expose the SMART product to rain or
moisture.

IMPORTANT INFORMATION
ii smarttech.com/kb/170782
lTwo people are required to mount your SMART product because it may be too heavy for
one person to safely maneuver.
When you lift your interactive whiteboard, you and your assistant should stand on either side
of the screen, supporting its weight at the bottom while balancing the top with your other
hands.
lWhen mounting the projector boom on a framed or hollow wall, attach the mounting bracket
to a stud to safely support the projector’s weight. If you use only drywall anchors, the drywall
can fail, resulting in possible personal injury, and damage to the product which may not be
covered by your warranty.
lDo not leave cables on the floor where they can be a tripping hazard. If you must run a cable
over the floor, lay it in a flat, straight line and secure it to the floor with tape or a cable
management strip of a contrasting color. Handle cables carefully and avoid excessive
bending.
CAUTION
lDo not operate this unit immediately after moving it from a cold location to a warm location.
When the unit is exposed to such a change in temperature, moisture can condense on the
lens and crucial internal parts. Allow the system to stabilize to room temperature before
operation to prevent possible damage to the unit.
lDo not place the unit in hot locations, such as near heating equipment. Doing so could cause
a malfunction and shorten the life of the projector.
lAvoid setting up and using the SMART product in an area with excessive levels of dust,
humidity and smoke.
lDo not place your SMART product in direct sunlight or near any appliance that generates a
strong magnetic field.
lIf you need to lean the interactive whiteboard against a wall before you mount it, make sure
it remains in an upright position, resting on the pen tray brackets, which can sustain the
weight of the interactive whiteboard.
Do not rest the interactive whiteboard on its side or on the top of the frame.

IMPORTANT INFORMATION
iii smarttech.com/kb/170782
lYou must connect the USB cable that came with your SMARTBoard interactive whiteboard
to a computer that has a USB compliant interface and that bears the USB logo. In addition,
the USB source computer must be compliant with CSA/UL/EN 60950 and bear the CE mark
and CSA and/or UL Mark(s) for CSA/UL 60950. This is for operating safety and to avoid
damage to the SMARTBoard interactive whiteboard.
IMPORTANT
lThe SMARTBoard M680Viv2 and 480iv2 interactive whiteboard system textless installation
guide is also available online (smarttech.com/kb/170779).
lMake sure an electrical socket is near your SMART product and remains easily accessible
during use.
lUsing your SMART product near a TV or radio could cause interference to the images or
sound. If this happens, move the TV or radio away from the projector.
Operation
WARNING
lIf you are using an external audio system, use only the power supply included with that
product. Using the wrong power supply might create a safety hazard or damage the
equipment. If in doubt, refer to the specification sheet for your product to verify the power
supply type.
lDo not climb (or allow children to climb) on a wall- or stand-mounted SMARTBoard
interactive whiteboard.
lDo not climb on, hang from or suspend objects from the projector boom.
lClimbing on the interactive whiteboard or projector boom could result in
personal injury or product damage.
CAUTION
Do not block the projector’s ventilation slots and openings.
IMPORTANT
lKeep your remote control in a safe place because there is no other way to access menu
options.
lDisconnect the product from its power source when it is not used for a long period.

IMPORTANT INFORMATION
iv smarttech.com/kb/170782
Other precautions
If you own a SMARTproduct other than a SMARTBoard 480iv2 interactive whiteboard system or
SMARTBoard M680Viv2 interactive whiteboard system, refer to the installation manual for your
product for relevant warnings and maintenance instructions.
Environmental requirements
Before you install your SMARTBoard interactive whiteboard system, review the following
environmental requirements.
Environmental
requirement
Parameter
Interactive whiteboard
operating temperature
l41°F to 95°F (5°C to 35°C) from 0' to 6000' (0 m to 1800 m)
l41°F to 86°F (5°C to 30°C) from 6000' to 9800' (1800 m to 3000 m)
Projector operating
temperature
l41°F to 104°F (5°C to 40°C) from 0' to 2500' (0 m to 762 m)
l41°F to 95°F (5°C to 35°C) from 2500' to 5000' (762 m to 1524 m)
l41°F to 86°F (5°C to 30°C) from 5000' to 10 000' (1524 m to 3048 m)
Storage temperature -4°F to 122°F (-20°C to 50°C)
Humidity l5% to 80% operating relative humidity, non-condensing
l5% to 80% storage relative humidity, non-condensing
Water and fluid
resistance
lIntended for indoor use only. Doesn’t meet any salt-spray or water
ingress requirements.
lDon’t pour or spray liquids directly onto your interactive whiteboard,
the projector or any of its sub-components.
Dust lIntended for use in office and classroom environments. Not for
industrial use where heavy dust and pollutants can cause
malfunctions or impaired operation. Periodic cleaning is required in
areas with heavier dust. See Cleaning the projector on page27 for
information on cleaning the SMARTV30 projector. See Cleaning
the air filters on page31 for information on cleaning the air filters in
the SMARTV30 projector.
Electrostatic discharge
(ESD)
lEN61000-4-2 severity level 4 for direct and indirect ESD
lNo malfunction or damage up to 8 kV (both polarities) with a
330ohm, 150 pF probe (air discharge)
lUnmated connectors meet no malfunction or damage up to 4 kV
(both polarities) for direct (contact) discharge
Cables All SMARTBoard interactive whiteboard system cables should be
shielded to prevent potential accidents and degraded video and audio
quality.

IMPORTANT INFORMATION
v smarttech.com/kb/170782
Environmental
requirement
Parameter
Conducted and
radiated emissions
EN55022/CISPR 22, Class A

vii smarttech.com/kb/170782
Contents
Important information i
Safety warnings, cautions and important information i
Environmental requirements iv
Chapter 1: About your interactive whiteboard system 1
SMART V30 projector 2
SMARTBoard 480iv2 interactive whiteboard system features 3
SMARTBoard M680Viv2 interactive whiteboard system features 4
Included accessories 5
Other optional accessories 5
Chapter 2: Installing your interactive whiteboard system 7
Choosing a location 8
Choosing a height 8
Installing SMART software 9
Setting up the projector image 9
Integrating your system with peripheral devices 13
Chapter 3: Using your interactive whiteboard system 15
Using your projector 15
Using your interactive whiteboard 24
Chapter 4: Maintaining your interactive whiteboard system 25
Maintaining your interactive whiteboard 25
Cleaning the projector 27
Focusing and adjusting the projector image 27
Removing and replacing the projector lamp module 27
Resetting the lamp hours 29
Replacing the remote control battery 30
Cleaning the air filters 31
Chapter 5: Troubleshooting your interactive whiteboard system 33
Before you start 34
Resolving interactive whiteboard issues 35
Determining your SMARTV30 projector status 36
Resolving projector issues 37
Resolving audio issues 42
Resolving network communication issues 43
Resetting your password 43

CONTENTS
viii smarttech.com/kb/170782
Transporting your interactive whiteboard system 44
Appendix A: Remotely managing your system through a network interface 45
Web page management 45
Appendix B: Remotely managing your system through an RS-232 serial interface 51
Connecting your room control system to the SMARTV30 projector 52
Projector programming commands 53
Appendix C: Adjusting projector settings 55
Appendix D: Integrating other devices 61
Video format 61
Connecting peripheral sources and outputs 64
Appendix E: Remote control code definitions 67
Appendix F: Hardware environmental compliance 69
Waste Electrical and Electronic Equipment and Battery regulations (WEEE and
BatteryDirectives) 69
Batteries 69
Mercury 69
More information 69
Index 71