SMITH SYSTEM 26690 User manual

For assistance in assembling the product, missing or damaged
parts, or to place an order, please contact customer service at
800-328-1061.
Form # 179826 02/2013
Reference Library Carrel
Assembly Instructions
Model
26690

For assistance in assembling the product, missing or damaged
parts, or to place an order, please contact customer service at
800-328-1061.
Form # 179826 02/2013
Special Notes
1. Check that all components are accounted for and undamaged before assembling.
2. Assemble the product in a clean and dry area.
3. For larger units, you may need another person to help assemble the product.
4. Clean the product with a mild cleaner and a damp cloth.
Tools
You will need a Phillips head screwdriver.
Hardware and Components
Replacement Packs:
1. 69738 includes
a. (18) 70080- 10x5/8 Truss Head Phillips Head
2. 74125 includes
a. (12) 70080- 10x5/8 Truss Head Phillips Head
b. (6) 70870- Connector Bolt ¼-20X23mm
c. (6) 70869- Connector Nut ¼-20X17mm
d. (4) 70226- Machine Screw 10-32X.5
e. (2) 77813- Hex Key- 3/16” Short Arm
#10 Wood Screws
(Qty. 30)
P/N-70080
Connector Bolts (Qt. 6)
P/N-70870- Connector Bolt
P/N-70869- Connector Nut
Machine Screws
(Qty. 4)
P/N-70226
Allen Wrench
(Qty. 2)
P/N-77813
Cross Brace
(Qty. 1)
P/N-73072
Modesty Panel
(Qty. 1)
P/N-71001
Carrel Shelves
(Qty. 3)
P/N-77890
Reference Stand Top
(Qty. 1)
Carrel Bracket
(Qty. 2)
P/N-73061
Panels (Qty. 2)

For assistance in assembling the product, missing or damaged
parts, or to place an order, please contact customer service at
800-328-1061.
Form # 179826 02/2013
Assembly Instructions
Step 1: With help, lay the side panels on the floor while aligning the cross bar with the pilot holes. Using
(4) Machine Screws, attach the crossbar to the side panels (See Drawing 1A).
Step 2: Slide the modesty panel in-between both panels, with the bracket facing up. Verify alignment
with the pilot holes and attach using (6) Connector Bolts (See Drawing 2A). Next attach the brackets with
the pilot holes on the side panels using (6) Wood Screws.
Drawing 1A
Drawing 2A

For assistance in assembling the product, missing or damaged
parts, or to place an order, please contact customer service at
800-328-1061.
Form # 179826 02/2013
Step 3: Slide the work surface above both brackets until it runs flush against the modesty panel. Align
the predrilled holes underneath the table top with the brackets. Using (6) Wood Screws, attach the top
to the brackets.
Step 4: Slide the shelves in-between the side panels, align with the pilot holes, and attach using (6)
Wood Screws per shelf. Rotate the unit into its upright position, and it is ready for use.