SMITH SYSTEM 25218f User manual

Form# 179913
08/2018
Assembly Instructions
Planner Studio
Fixed Height Tables
If you have damaged or missing components,
Please contact customer service at 1-800-328-1061

Form# 179913
08/2018
4” CASTOR
QTY. 4
(CASTOR TABLES ONLY)
PLANNER STUDIO TOP
QTY. 1
PLANNER STUDIO LEG
QTY. 2
¼-20 LOCK NUT
QTY. 6 (12 ON 48” LEG SETS)
#10 X ¾” WOOD SCREW
QTY. 28 (48 ON 48” LEG SETS)
PLANNER STUDIO SUPPORT CHANNEL
QTY. 1 (2 ON 48” LEG SETS)
CASTOR WRENCH
QTY. 1
(CASTOR TABLES ONLY)
ALLEN KEY
QTY. 1
SOCKET HEAD
CAP SCREW
QTY. 4
(GLIDE TABLES ONLY)
STRAIGHT HEX KEY
QTY. 1
(GLIDE TABLES ONLY)
PLASTIC INSERT
QTY. 4
(GLIDE TABLES ONLY)
THREADED GLIDE
QTY. 4
(GLIDE TABLES ONLY)
¼-20 X 3” BOLT
QTY. 6 (12 ON 48” LEG SETS)
Hardware and Components
LEG EXTENSION
QTY. 4
(GLIDE TABLES ONLY)
PACK #17542
PACK #17543

Form# 179913
08/2018
Special Notes:
TOOLS REQUIRED:
•Drill w/#2 phillips driver bit, or #2 phillips head screwdriver.
•7/16”socket & ratchet, or 7/16”wrench.
•Drill, or impact driver, or adjustable wrench (tables with glides only).
•Rubber mallet, or similar (tables with glides only).
Check that all components are accounted for and undamaged before assembling.
Please assemble the product in a clean and dry area.
You will need another person to help assemble the product. Team lifting required.
Clean the product with a mild cleaner and a damp cloth.

Form# 179913
08/2018
Assembly Instructions
1. Lay top down on a clean smooth surface that will not harm the top finish. Underside of
top should be exposed. Top is heavy, team lifting is advised.
2. Position the support channel(s) onto the top, as shown. Do not attach support channel
to top yet. First attach the legs, one at a time, to the support channel(s) by using the
supplied ¼-20 x 3” bolts and ¼-20 locknuts. NOTE: 48” leg sets have 2 support channels.
Helpful Hint: The nut goes on the inside; bolt head seen on the outside.
Helpful Hint: Make sure legs are facing the right direction, as shown.

Form# 179913
08/2018
3. Attach the now assembled frame to the wood top using #10 x ¾” wood screws.
Hole pattern on underside of top serves as a guide for proper positioning.
4. CASTER / GLIDES INSTALLATION
a. CASTERS - Install casters using the caster wrench. Hand tighten until very snug.

Form# 179913
08/2018
4. CASTER/FOOT INSTALLATION (continued…)
b. GLIDES - Step 1: Install LEG EXTENSION to leg using SOCKET HEAD CAP SCREW.
i. Tighten screw using the supplied STRAIGHT HEX KEY in combination with
a drill or wrench as shown.
ii. Tighten firmly.
GLIDES - Step 2: Carefully tap PLASTIC INSERT in using rubber mallet (or similar).
GLIDES - Step 3: Twist THREADED GLIDE on by hand.

Form# 179913
08/2018
5. With a partner, team lift table and flip to the upright position.
Helpful hint: Lock all casters to prevent unexpected rolling when table legs touch down.
DONE.
…TABLE WITH CASTORS
…TABLE WITH GLIDES