SMITH SYSTEM UXL Nest and Fold Table User manual

For assistance in assembling product, missing or damaged parts, or to place an order, please
contact customer service at 800-328-1061.
You may also place your order online at
Form #179977 www.smithsystem.com 09/2014
Assembly Instructions
UXL Nest and Fold Table
Special Notes
1. Check that all components are accounted for and undamaged
before assembling.
2. Please assemble product in a clean dry area.
3. For larger units, you may need another person to help assemble
the product.
4. Clean the product with a mild cleaner and a damp cloth.

For assistance in assembling product, missing or damaged parts, or to place an order, please
contact customer service at 800-328-1061.
You may also place your order online at
Form #179977 www.smithsystem.com 09/2014
P/N: 70054
¾” Wood Screw
QTY: 14
M5X.8X10mm
Machine Screw
QTY: 2
M4X.7X6mm
Machine Screw
QTY: 4
Nest & Fold
Support caps
QTY: 2
Nest & Fold
Threaded Caster
QTY: 4 Casters
Caster Wrench
QTY: 1
Nest & Fold Folding
Mech.
QTY: 1 Pair
Nest & Fold
Handle
QTY: 1
Nest & Fold
Beam
QTY: 1
Nest & Fold Leg Set
QTY: 1 Set
Nest & Fold
Support
QTY: 1
Replacement Hardware Pack
70148-R includes:
(4) M8X1.25X30mm Countersunk Machine
Screws
(1) 5mm Allen Wrench
Components & Hardware

For assistance in assembling product, missing or damaged parts, or to place an order, please
contact customer service at 800-328-1061.
You may also place your order online at
Form #179977 www.smithsystem.com 09/2014
Assembly Instructions
Step 1: Lay the frame with the attached top upside down on a clean dry surface.
Step 2: Pull the handle towards the front of the table to unlock the mechanisms and flip both
mechanisms up.
Step 3: Remove the top plate from both legs.

For assistance in assembling product, missing or damaged parts, or to place an order, please
contact customer service at 800-328-1061.
You may also place your order online at
Form #179977 www.smithsystem.com 09/2014
Step 4: Slide the leg around the beam ensuring that the longer leg faces towards the handle
and the shorter leg faces away from the handle.
Step 5: Attach both legs to each side of the beam and tighten using a 5mm Allen Wrench, bolts,
and plate removed in Step 2.
Step 6 (Optional): Lock the legs back into their upright positions. Attach casters to the bottom
of the leg sets using the supplied wrench to tighten fully.

For assistance in assembling product, missing or damaged parts, or to place an order, please
contact customer service at 800-328-1061.
You may also place your order online at
Form #179977 www.smithsystem.com 09/2014
Step 7: Ensure the legs are fully locked into position and place the table into its upright
position.