SMITH SYSTEM Flavors P-Tablet User manual

1714 East 14th Street Plano, Texas 75074 [phone] Fax [phone]
www.smithsystem.com
Flavors/Plato P-Tablet/Rhombus Chair
Assembly Instructions
For assistance in assembling product, missing or damaged parts, or to place an order please
contact customer service at 1-800-328-1061. You may also place your order online at
www.smithsystem.com
Hardware Components:
Flavors or Plato (96742) Clamps P-Tablet
(70080) (QTY 12) Flavors/Plato ‘P-Tablet Rhombus Tablet
3/16” x5/8” wood screws Arm Frame
Tools Needed:
Phillips Head #2

1714 East 14th Street Plano, Texas 75074 [phone] Fax [phone]
www.smithsystem.com
Flavors/Plato P-Tablet/Rhombus Chair Directions
1. Place your 3/4” P-Tablet or Rhombus top laminate side down on a clean, dry surface. Place
the Tablet Arm Frame on the Tablet Top. Locate the (5) Clamps and line them up with the holes
in the frame.
2. Attach the clamps to the top with the (12) 3/16” x 5/8” wood screws.

1714 East 14th Street Plano, Texas 75074 [phone] Fax [phone]
www.smithsystem.com
Flavors/Plato P-Tablet/Rhombus Chair Directions
3. Remove the stacking bumpers from the bottom of the chair by unfastening the screws, and
KEEP THE SCREWS
4. Use the same screws to attach the Tablet Arm Assembly to the chair.
Stacking bumper
Remove screw
Use the same screws to attach
the tablet arm in the same
location where the stacking
bumpers were.