Snapmaker A350 User manual

QUICK START GUIDE
Make Something Wonderful

Quick Start Guide | 7
Quick
ui
uick
k
Quic
Qui
Quick
ic
Q
Q
ick
k
tar
Star
Sta
St
ar
r
St
S
t
G
G
Gu
u
u
i
t
GG
t Gu
ui
Gui
d
d
de
e
d
de
de
e
e
e
|
|
|
|
|
7
7
7
7
7
7
7
7
7
02
14
44
56
72
Before You Start
Machine Assembly
3D Printing
Laser Engraving and Cutting
CNC Carving
CONTENT
Before You Start
Chapter

2| wwww.snapmaker.com Quick Start Guide | 3
Assemble Your Snapmaker
1.1.Parts List
Base Plate x 1
Print Sheet x 1
Platform x 1
3D Printing Module x 1 Laser Module x 1
CNC Carving Platform x 1
Laser Engraving/Cutting Platform x 1
Heated Bed x 1
CNC Module x 1
Toolhead Connecting Cable x 1
AC Power Cable x 1
DC Power Cable x 1
Z-Axis Holder x 2
Converter x 2
Touch Screen Holder x 1
Laser Safety Glasses x 1
Filament Holder Sheet x 1
Filament Holder Tube x 1
Tool Box x 1
Touch Screen x 1
Controller x 1
USB Cable x 1
Z Conversion Cable x 1
Y Conversion Cable x 1
Y Conversion Cable x 1
Power Module x 1 Filament x 1
Linear Module x 5
CNC Safety Glasses x 1
Fixture Accessory x 4
Fixture Accessory x 4

4| wwww.snapmaker.com Quick Start Guide | 5
Assemble Your Snapmaker
Power Adapter x 1Power Adapter x 1
M4 x 10 Cylindrical Head Screw x 21
ER11 Collet (Only for 3.175 mm
CNC Bits) x 1 + ER11 Nut x 1
&YXXIVJP]Ʌ2YXx 4
14mm Open-End Wrench x 1
17mm Open-End Wrench x 1
Palette Knife x 1
M4 x 8 Screw x 66 M4 x 10 Countersunk Head
Screw x 22
Screwdriver x 1
Power Adapter x 1
Tweezer x 1
M4 x 70 Screw x 4
M4 x 30 Screw x 12
Tool Box
Tool Box
Wiping Cloth x 1Test Material for CNC x 1 Test Material for Laser x 1 Calibration Card x 1
Diagonal Pliers x 1
Silicone Stopper x 10
1.2.Labels on Your Snapmaker
Foot x 4
The temperature of the heated bed can reach up to 80°C (176°F), and the
XIQTIVEXYVISJXLIRS^^PIGERVIEGLYTɄXSq'q*(SRSXXSYGLXLILIEXIH
bed, nozzle or print sheet when the printer is preheating, printing or cooling down.
Always wait for the temperatures of the nozzle and the heated bed to drop to room
temperature before touching them.
The spindle speed of the CNC module can reach 6000-12,000 RPM and the CNC
bits are sharp. Keep a safe distance from the machine when it is carving. Handle
the CNC bits carefully and keep them out of reach of children.
The laser module is a Class 4
laser product, which wavelength
is 450nm and the maximum
output is 1600mW. Avoid eyes
or skin exposure to direct or
scattered radiation.
Laser radiation is emitted from the aperture.
)YVSTIŝŝŞŞŞ97%
)YVSTIŝŝŞŞ97%
1.3.Disclaimer
Please read and understand the contents of the Safety and Compliance Information. Failure
to read this Safety and Compliance Information may lead to personal injury, inferior results or
damage to the Snapmaker Original. Always make sure that anyone who uses the machine knows
and understands the contents of this Safety and Compliance Information to make the most out of
Snapmaker Original.
The conditions or methods used for assembling, using or disposal of the device are beyond
our control and may be beyond our knowledge. For this and other reasons, we do not assume
responsibility and expressly disclaim liability for loss, injuries, damage, or expense arising out of
or in any way connected with the assembly, handling, use or disposal of the product.
The information in this document was obtained from sources which we believe are reliable.
However, the information is provided without any warranty, express or implied, regarding its
correctness.
1.4.General Safety Information

6| wwww.snapmaker.com Quick Start Guide | 7
Assemble Your Snapmaker
The Snapmaker Original is not intended for use for persons (including children) with reduced
physical and/or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by a person responsible for
their safety.
Improperly operating the Snapmaker can got burned from the heated nozzle and heated bed.
Please assemble the machine strictly according to the Quick Start Guide and follow the online
manual book (https://manual.snapmaker.com/) to operate.
Children should be under constant supervision and assistance of an adult when using the
Snapmaker Original.
(SRSXGLERKISVEHNYWXER]XLMRKSRXLI7RETQEOIV3VMKMREPYRPIWWXLIGLERKIMWEYXLSVM^IHF]
the manufacturer.
Stop using your Snapmaker Original if any of the following occurs. Turn off the machine
MQQIHMEXIP]ERHYRTPYKXLITS[IVEHETXIVERHGSRXEGXWYTTSVX$WRETQEOIVGSQ(SRSXYWI
your Snapmaker Original again until the issue has been addressed by support.
8LIVIMWEJMVIMRXLI7RETQEOIV3VMKMREP[LMGLTIVWMWXWEJXIVXLIQEGLMRIXYVRWSJJ
8LI7RETQEOIV3VMKMREPWXSTWYRI\TIGXIHP]
=SYWIIER]HEQEKIXSXLIMRXIVMSVGSQTSRIRXWSJXLI7RETQEOIV3VMKMREP
=SYRSXMGIYRYWYEPPMKLXGSQMRKJVSQXLI7RETQEOIV3VMKMREPXLEX[EWRSXSGGYVVMRKTVIZMSYWP]
=SYRSXMGIERYRYWYEPWSYRHGSQMRKJVSQXLI7RETQEOIV3VMKMREPXLEX[EWRSXSGGYVVMRK
previously.
1.5.Safety Information for 3D Printing
1EOIWYVIEPPGEFPIWEVIGSRRIGXIHTVSTIVP]ERHQSHYPIWEVIJM\IHXMKLXP]
(SRSXSTIVEXIRIEVXLITVMRXLIEHSVRS^^PI[LMPIMXMWLIEXMRKTVMRXMRKSVGSSPMRKHS[R
8IQTIVEXYVIWGERVIEGLYTXS
To reduce the risk of electric shock or fire:
(SRSXXV]XSWIVZMGIVITEMVSVQSHMJ]XLI7RETQEOIV
2IZIVXV]XSEGGIWWXLI[MVMRKSJXLI7RETQEOIV
1.6.Safety Information for Laser Engraving
Ʉ;IEVXLI0EWIV7EJIX]+PEWWIWERHTYXXLI(TVMRXIVMRXSXLI)RGPSWYVIFIJSVI]SYWIXYTXLI
laser engraver and throughout the laser engraving process.
Ʉ'LMPHVIRVIUYMVIXLIWYTIVZMWMSRERHEWWMWXERGISJEREHYPXEXEPPXMQIW
(SRSXYWI]SYV7RETQEOIV[LMPIYRHIVXLIMRJPYIRGISJEPGSLSPSVHVYKW
To reduce the risk of electric shock or fire:
(SRSXXV]XSWIVZMGIVITEMVSVQSHMJ]XLI7RETQEOIV
2IZIVXV]XSEGGIWWXLI[MVMRKSJXLI7RETQEOIV
(SRSXSTIRXLITS[IVWYTTP]SVER]SXLIVWIEPIHTSVXMSRSJXLI7RETQEOIV
1.7.Safety Information for CNC Carving
9WIH7]QFSPW
Caution : Ignoring this type of message might result in malfunction or damage of the
machine and injuries to users.
2SXMGI(IXEMPW]SYWLSYPHFIE[EVISJXLVSYKLSYXXLITVSGIWW
Tips: Tips offer you convenient operations and additional options.
Make sure that the highlighted part is facing the right way.
Tighten the screws when this symbol is absent.
+IXXLI7GVI[HVMZIV6IEH]
Ʉ-XMWVIGSQQIRHIHXLEXI\TIVMIRGIHYWIVWERHYWIVWSZIV]IEVWSPHTIVJSVQXLIWIXYTERH
use the CNC carver.
Ʉ;IEVXLI'2'7EJIX]+PEWWIWFIJSVI]SYWIXYTXLI'2'GEVZIVERHXLVSYKLSYXXLI'2'GEVZMRK
process.
Ʉ8LI'2'FMXWEVIWLEVT4PIEWILERHPIXLIQGEVIJYPP]ERHOIITXLIQSYXSJVIEGLSJGLMPHVIR
To reduce the risk of electric shock or fire:
(SRSXXV]XSWIVZMGIVITEMVSVQSHMJ]XLI7RETQEOIV
2IZIVXV]XSEGGIWWXLI[MVMRKSJXLI7RETQEOIV
(SRSXSTIRXLITS[IVWYTTP]SVER]SXLIVWIEPIHTSVXMSRSJXLI7RETQEOIV
:MHIS8YXSVMEPW
We provide both the video tutorials and Quick Start Guide which help you get started. You can
either read this Quick Start Guide to finish assembly and begin your maker journey, or watch the
video tutorials at https://www.snapmaker.com/document

8| wwww.snapmaker.com Quick Start Guide | 9
Assemble Your Snapmaker
8
| wwww.sna
p
maker.co
m
Quic
k
Start Gui
de
|9
A
A
Asse
Asse
Ass
m
bl
e
Yo
ou
o
r Sn
n
r Sn
ap
p
pma
ke
ke
e
e
r
r
ke
r
r
Before You Start
Chapter

10 | wwww.snapmaker.com Quick Start Guide | 11
Assemble Your Snapmaker
Ş01/22
Attach the feet to the Base Plate.
1\']PMRHVMGEP
,IEH7GVI[ x 4
Base Plate x 1
Foot x 4
Ş02/22
Make sure the sliders are aligning with each other. If not, you can move them
to the same position as illustrated.
%0/&

0MRIEV1SHYPI x 2
4PIEWILSPHXLIPMRIEVQSHYPIWGEVIJYPP]XSTVIZIRXXLIQJVSQJEPPMRK
8LIɄWXIIPFIPXWWLSYPHRIZIVFITVIWWIH

12 | wwww.snapmaker.com Quick Start Guide | 13
Assemble Your Snapmaker
M4 x 8 Screw x 8
Ş03/22
%XXEGLXLI4PEXJSVQXSXLI=E\IW(SRSXXMKLXIRXLIWGVI[WYRXMP7XIT
Platform x 1
Ş04/22
Attach the Y axes to the Base Plate.
M4 x 8 Screw x 16
1EOIWYVIXLI=%\MW0MRIEV1SHYPIWEVIEGGYVEXIP]
QSYRXIHSRXSXLIKVSSZIWSJXLI&EWI4PEXI

14 | wwww.snapmaker.com Quick Start Guide | 15
Assemble Your Snapmaker
-JXLIWGVI[WSRXLIWPMHIVWEVIRSXEPMKRMRK[MXLXLIWGVI[LSPIWSRXLI&EWI4PEXITPIEWIQSZI
the Platform to the proper position.
Ş05/22
Tighten the screws on the Y-axis sliders.
M4 x 8 Screw x 8
>%\MW,SPHIV x 2
Ş06/22
Attach the Z-Axis Holders to the Base Plate.

16 | wwww.snapmaker.com Quick Start Guide | 17
Assemble Your Snapmaker
M4 x 8 Screw x 2
8SYGL7GVIIR,SPHIV x 1
Ş07/22
Attach the Touch Screen Holder to the Base Plate.




M4 x 8 Screw x 12
0MRIEV1SHYPI x 2
Ş08/22
Thread the connecting cables through the holes of the holders, then attach
XLI>E\IWXSXLI>%\MW,SPHIVW(SRSXXMKLXIRXLIWGVI[WYRXMP7XIT

18 | wwww.snapmaker.com Quick Start Guide | 19
Assemble Your Snapmaker
M4 x 8 Screw x 8
Ş09/22
-RWXEPPXLIWGVI[WPSGEXIHSRXLI>E\MWFSXXSQW(SRSXXMKLXIRXLIWGVI[W
YRXMP7XIT
Ş10/22
In the midline direction, manually move the Platform to the position as
illustrated. Then move the Z-axis sliders to the bottom that they can reach.

20 | wwww.snapmaker.com Quick Start Guide | 21
Assemble Your Snapmaker
0MRIEV1SHYPI x 1
Ş11/22
Attach the X axis to the sliders of the Z axes.
M4 x 8 Screw x 8
Ş12/22
Tighten the screws that are used to attach the Z axes to the Z-Axis Holders.

22 | wwww.snapmaker.com Quick Start Guide | 23
Assemble Your Snapmaker
Ş13/22
Tighten the screws located on the Z-axis bottoms.
1EOIWYVIFSXLIRHWSJXLIPMRIEVQSHYPIEVIMRLSVM^SRXEPEPMKRQIRX[MXLIEGLSXLIVXLVSYKLSYX
the process.
Ş14/22
Put your hands at each end of the linear module, then move the X axis to the
top.

24 | wwww.snapmaker.com Quick Start Guide | 25
Assemble Your Snapmaker
Converter x 1
Y Conversion Cable x 1
Ş15/22
Locate the Y Conversion Cable and the Y-axis connecting cables as illustrated,
then connect them to the Converter.
M4 x 30 Screw x 4
Ş16/22
Attach the Y-axis converter to the Base Plate.

26 | wwww.snapmaker.com Quick Start Guide | 27
Assemble Your Snapmaker
Converter x 1Z Conversion Cable x 1
Ş17/22
Locate the Z Conversion Cable and the Z-axis connecting cables as illustrated,
then connect them to the Converter.
M4 x 30 Screw x 4
Ş18/22
Attach the Z-axis converter to the Base Plate.

28 | wwww.snapmaker.com Quick Start Guide | 29
Assemble Your Snapmaker
Controller x 1
M4 x 30 Screw x 4
Ş19/22
Attach the Controller to the Z axis.
Add-on 3 Heated Bed Power
Screen USB
Toolhead Add-on 1 Add-on 2
<%\MW
=%\MW
>%\MW
Ş20/22
Open the dust plugs, then connect the X, Y and Z axis to the Controller.
/IITXLITVSXIGXMZIHYWXTPYKW
SRXLIYRTPYKKIHGSRRIGXSVW
Dust accumulation may
seriously affect the
performance of the Controller.

30 | wwww.snapmaker.com Quick Start Guide | 31
Assemble Your Snapmaker
8SYGL7GVIIR x 1
Ş21/22
Place the Touch Screen, then connect the Touch Screen to the Controller.
4S[IV1SHYPI x 1
%'4S[IV'EFPI x 1
DC Power Cable x 1
(SRSXGSRRIGXSVHMWGSRRIGXER]GEFPIW
[LIRXLIQEGLMRIMWTS[IVIHSR
Make sure the power switch
is in the Off position.
Ş22/22
Connect the cables for the Power Module.

32 | wwww.snapmaker.com Quick Start Guide | 33
Assemble Your Snapmaker
After assembling the machine body,
you can select one function to complete
the assembly.
3D Printer Laser Engraver
and Cutter CNC Carving
PAGE 27 PAGE 31 PAGE 49
Q
uic
k
Start Gui
d
e|
3
3
Before You Start
Chapter