4
https://snapmaker.com/
- An air purifier should be used depending on the type and constituent of the materials you are going to use, as
some materials may release hazardous and toxic fumes when laser engraved or cut. Ensure that the air purifier
you choose is effective enough to protect human health and prevent environmental pollution.
- Do not directly look at or touch the laser aperture or expose yourself to the laser beam during operation.
- Ensure that there is no reflective material within the work area during operation, as it may cause scattered
radiation and poses safety risks.
- Ensure that there is no flammable and explosive material within the work area or around the machine during
operation, as it may cause a fire.
- The 10W Laser Module mustn't be used with the 3D printing platform and the CNC carving and cutting
platform (allowed only in the 4-axis machining scenario, for the Rotary Module can only be attached to the CNC
platform).Otherwise, it might damage the mismatched work platform, cause a fire, or pose other risks.
1.3.4 CNC Safety Information
- Users of the CNC Module should be at least 18 years old and have relevant experience.
- Use the CNC Module together with the Enclosure.
- All the users and bystanders must wear the CNC safety goggles during operation.
- Before a CNC process, make sure to securely clamp the material.
- During a CNC process, never attempt to hold the workpiece with your hands.
- If the bit or workpiece becomes jammed or bogged down, turn off the machine immediately. Wait for all the
moving parts to stop, unplug the cable, and then work to free the jammed material.
- Do not touch the bit or the collet right after use, as doing so could cause burn injuries.
- The toxic substances contained in some materials might be released in CNC carving and cutting processes.
To reduce the harm, use the CNC Module with air purifying devices or in a well-ventilated environment and take
safety precautions, such as wearing a mask.
1.3.5 Enclosure Safety Information
- To move the Enclosure or the machine, you must first separate the machine and the Enclosure under the
instructions in the User Manual (which is available at our Support Center: select Snapmaker Artisan > User
Manual).
- Do not scrape, bend or break the acrylic panels, profiles, or the door handle. Doing so can compromise
protection, cause permanent damage to the Enclosure, or even cause personal injuries.
- Do not place the Integrated Controller inside the Enclosure when using this product.
- Do not place objects that weigh more than 7 kg on top of the Enclosure. Otherwise, the top panel will be
damaged.
- Do not put any objects or body parts into the exhaust fan when the fan is operating.
- Keep the cables away from the exhaust fan blades to avoid damaging the exhaust fan or other parts of this
product.
1.3.6 Emergency Measures and Precautions
Burns from Hot Surface
Touching hot surfaces (including the heated nozzle, hot end, heated bed, glass build plate,and melting
filament) could cause skin burns. If you are burnt, take the following measures immediately:
1. Get yourself away from the heat source;
2. Immediately rinse your burnt area with cool running water;
3. Remove any clothing or jewelry near your burnt area;
4. Wrap the burnt area with a clean, dry bandage;
