Maintenance/Cleaning
Please use soft dry clothes to clean the device.
Don’t use wet clothes.
Don’t use volatile chemical like benzene, or thinner since they can damage the device.
If you want to use a chemical wipe, please read the cautionary notes before using it.
Connection Method:
1. Connect the handset cord in the handset and connect it on the main body.
2. Plug the Ethernet (network cable into the RJ 45 connector labeled [Net] and plug the
other end into the network side to establish a data link.
3. The second RJ45 connector, labeled [PC], is for chaining further Ethernet devices
without the need for a second Ethernet connection line.
4. Insert the plug of the power supply into the connector labeled [DC 5V] and hooks up
the casing into the mains.
5. If you want to use a headset, connect it to the RJ audio jack on the bottom shell of the
phone.
!
SNOM300
SNOM300 is a phone device that can be used with our service. It cannot be used as a
typical phone. The customer must subscribe to an Internet Service Provider to be able to
use the device. Customer with no broadband router feature must provide a separate
broadband router.
