Snom 300 User manual

!
1!
SNOM 300
Thank you for purchasing SNOM 300..
Package Contents:
•SNOM 300 Body
•Handset
•5V Power Adapter
•Ethernet Cable
•Phone Cord
•User’s Manual
Disclaimer
•Product functions and specifications are subject to change without prior notice.
•Quality of call (e.g. choppy line, noise, etc.) may be affected by company’s network
environment.
•Our company does not assume any responsibilities for a difference in call quality due
to personal hearing impairment.
•Our company is not responsible for service that may not be available outside the
country.
•SNOM 300 may temporarily suspend the service for routine maintenance without prior
notice.
•We would not assume any liability for product failure due to device (phone)
malfunction.
Cleaning
To clean the SNOM 300, use an anti-static cloth. Please avoid cleaning liquids as they might
damage the surface or the internal electronics of the phone.

!
2!
Installation
1. Plug the Ethernet (network cable into the RJ 45 connector labeled [Net] and plug the
other end into the network side to establish a data link.
2. The second RJ45 connector, labeled [PC], is for daisy-chaining further Ethernet
devices without the need for a second Ethernet connection line.
3. Insert the plug of the power supply into the connector labeled [DC 5V]and hook up
the casing into the mains.
4. If you want to use a headset, connect it to the RJ audio jack on the bottom shell of the
phone.

!
3!

!
4!

!
5!

!
6!

!
7!

!
8!

!
9!

!
10!

!
11!
General Settings
1. Verify device’s IP Address.
Press the Navigation key [Down Arrow]!Select [Information IPAdr] !Press enter
[Check] button.
2. Open Web browser and type the device’s IP Address. Format: http://IPAddress
Example: IP Address 192.168.001.002 ![http://192.168.2].

!
12!
3. On the [Setup] options, select [Identity 1].
Display Name and Account: Enter [Unique ID].
Password: Enter [Registered Password] (sent thru mail).
* If you changed password, enter your new password.
Registrar and Outbound Proxy: Enter [VoIP Address].
Authentication Username: Enter [Unique ID].
Display Text for Idle Screen: Enter [Extension Number].
* Click [Apply] to save changes.
* Click [Play ringer] to confirm your ringing tone. You can also listen through your device,
and make sure to check the device’s volume.

!
13!
4. On the [Setup] options, select [Identity 1], then click [NAT].
Keepalive Interval (seconds): Enter [20] seconds.
* Click [Apply] to save changes.

!
14!
5. On the [Setup] options, select [Preferences].
Web Interface Language: Select [English].
Language: Select [English].
Number Display Style: Select [Number].
Tone Scheme: Select [United States].
* Click [Apply] to save changes.

!
15!
6. On the [Setup] options, select [Advanced].
NTP Time Server: Enter [ntp.jst.mfeed.ad.jp].
NTP Refresh Time (sec): Select time zone.
* Click [Apply] to save changes.

!
16!
7. On the [Setup] options, select [Advanced], then click [Audio].
Call Waiting Indication: Select [OFF].
* Click [Apply] to save changes.

!
17!
8. On the [Setup] options, select [Advanced], then click [SIP/RIP].
Time Support (RFC4028): Select [OFF].
* Click [Apply] to save changes.

!
18!
9. On the [Setup] options, select [Advanced], then click [Update].
Update Policy: Select [Never update, do not load settings].
Subscribe Config: Select [OFF].
PnP Config: Select [ON].
* Click [Apply] to save changes.
* Click [Reboot] to reboot the device to apply all changes.

!
19!
10.On the [Setup] options, select [Function Keys].
Function keys:
L1 and L2: Device’s extension channel. Both lines can be used simultaneously.
Redial: Press to call the previous dialed number.
Directory: Phonebook
Transfer: Transfer button *Agile PRO is not supported.
Put the other party on hold and press [Transfer], then, dial the destination extension
number. You can hang-up after transferring the call.
Mute: Hold Button: Press this button to put the other party on hold; music is played on
the other line.
Menu Function Keys:
P5 Type: Select [DTMF].
P5 Number: Select [Transfer]. Or, Enter [#9]. When you first set configurations, you only
need to select from the options. When you set it again, you need to type the
configurations.
P6 Type: Select [Key Event].
P6 Number: Select [Hold].
* Click [Apply] to save changes.

!
20!
11. On the [Operation] options, select [Home].
View Call History!
1. Verify from Settings Screen
Dialed Numbers: List of previously called/dialed numbers.
Missed Calls: List of calls that is terminated before being answered by its intended
recipient.
Received Calls: List of calls answered by the call recipient.
* Calls can be made with just a click from the numbers on the list.
2. Verify from the device.
Press [Navigation Key] !Select [List: Missed].
You can also view other lists such as [Missed], [Received], [Dialed].
To make a call, select a number from the list and press [Enter key].
VoIPXXXX.agile.ne.jp
!