Setting up the Conference Call
Call the first Party.
Put the call on hold.
Call the second party.
Press Conference. The conference is established,
and the Conference screen appears.
Select a Party
Press Right or Left to select a party in the
conference
Press Left to select the Conference screen.
Putting a party on hold
Select the conference screen and press Hold or
The other party becomes an active call
To restart the conference, press Conference
Ending the conference
Select a party or the Conference screen
Press
Call Forwarding
Press and select Call Features > Call
Forwarding.
Select Forward All, Forward when Busy, or Forward
after Timeout.
Select Enable Forwarding, and Press to switch
between On or Off.
Select Target and enter the phone number to forward
calls.
For Forward after Timeout, enter the Wait Time (in
seconds) before forwarding the call.
Handset:
Lift the handset off the cradle, Enter the phone
number, press
OR Enter the phone number and pick up the handset.
Speakerphone:
If the green LED of the key is lit, press to turn
off headset mode.
With the handset in the cradle, enter the phone
number. Press
Headset:
If the green LED of the key is NOT lit, press
to turn on headset mode.
Enter the phone number. Press
Handset
Lift the handset off the cradle
Speakerphone:
Press
Headset:
Press
Place the handset in the cradle or press
Making Calls
Answering Calls
Ending Calls
Press Call History. Press to select All, Missed,
Received, or Dialed calls.
Press to select a call.
Press to dial the number of the selected call.
Press Delete to delete the selected call.
Press Clear to delete the entire list.
Press Sort to sort the calls.
Press Details to show details of the selected call. Press
Add Contact to add the call to the Directory
Press Directory or . To select an entry, press
OR enter the first letter of a name.
Press Sort to sort entries. Press to select a sort
option and press
Press Delete to delete the selected entry.
Press Details to display the selected entry. Press
Dial to dial the number of the entry.
Press Add Contact to add an entry. Enter the
information and press Save.
Press Edit to edit an entry. Enter the information and
press Save.
Phone Directory
Press to turn Do Not Disturb on or off. While on,
the symbol appears at top of the screen.
Attended transfer:
Put all calls on hold.
Dial a number and press
When the party answers, announce the call.
If you have more than one call on hold, press
Right or Left until the call you want to transfer is
displayed.
Press Transfer or , then press
Blind Transfer
Press Transfer or
Dial a number and press
There are two ways to transfer a call:
• Attended transfer - Call the destination party first, and
announce the call before making the transfer.
• Blind transfer - Transfer the call to the destination
party without announcing the call.
Voicemail
Press to call your voicemail retrieval number. When
you have a new message, the red LED of the key is
lit and the symbol appears at top of the screen.
Conference Calls
Want something like this for your customers? Visit comms-training.com
Handling Calls
Snom D717
Quick Reference Guide
Call History
Do Not Disturb
Transferring Calls