SOMFY Chronis Smart RTS User manual

www.somfy.com
Chronis Smart RTS
Operating and installation guide
Ref.5054476A

Contents
Copyright © 2008 Somfy SAS. All rights reserved.
Chronis Smart RTS
2
1. Brief introduction to the Chronis Smart RTS 3
1.1 What is the Chronis Smart RTS for? 3
1.2 A few defi nitions 3
2. Safety - Important information 3
2.1 Installation and commissioning 3
2.2 Operating 4
2.3 Environment 4
3. Content of the kit and tools required 4
3.1 List of parts 4
3.2 Tools required 4
4. The Chronis Smart RTS in detail 5
4.1 Components 5
4.2 Technical data 5
5. Before installing the Chronis Smart RTS 5
5.1 Turning the Chronis Smart RTS on 5
5.2 Setting the current time and date 5
6. Adding the Chronis Smart RTS 6
6.1 Identifying the original control point 6
6.2 One-touch point 7
6.3 Point with Up/STOP/Down buttons 9
6.4 Timer 10
6.5 Situo control point 11
6.6 Telis 1 RTS/Telis Soliris RTS remote controls 12
6.7 Telis 4 RTS/Telis 4 Soliris RTS remote controls 13
7. Replacing a lost or broken control point 13
7.1 Sole control point lost or broken 13
7.2 One lost or broken control point amongst others 13
8. Mounting the Chronis Smart RTS 14
8.1 Before mounting the Chronis Smart RTS 14
8.2 Mounting and fi tting 14
9. Everyday use of the Chronis Smart RTS 15
9.1 How does the Chronis Smart RTS operate? 15
9.2 Operating 15
9.3 Replacing the batteries 17
9.4 Maintenance 17
10. Customising the programs 18
10.1 Programs available 18
10.2 How to browse within a program? 18
10.3 Automatic opening time 19
10.4 Automatic closing time 21
10.5 Vacation mode 26
10.6 Cancelling customised settings 27
11. Problems with the Chronis Smart RTS? 27

Copyright © 2008 Somfy SAS. All rights reserved.
Somfy's expertise delivers satisfaction guaranteed.
Thank you for choosing a Somfy Chronis Smart RTS .
Before installing and using the Chronis Smart RTS, please read this guide carefully.
Somfy solutions animate your windows and entrances to bring your whole house alive. Somfy
solutions are designed so that everyone can enjoy the benefi ts of the products in their home,
based on their specifi c requirements.
In this guide, the term ‘product’ can include your awning, blind, curtain, garage door, gate, projec-
tion screen, roller shutter.
Well thought-out and easy to use, Somfy solutions are one of life’s little daily pleasures, making
home life more enjoyable.
1. Brief introduction to the Chronis Smart RTS
This guide describes the installation steps required to make the best use of the Chronis Smart
RTS. Advanced installation functions are available on our website (address on the back cover of
these instructions).
1.1 What is the Chronis Smart RTS for?
The Chronis Smart RTS is a wireless, programmable radio control point, compatible only with
products fi tted with Radio Technology Somfy (RTS), e.g. roller shutter motors, awning motors etc.
The Chronis Smart RTS is also called a “timer”.
The Chronis Smart RTS enables the product to be opened and closed once a day according to
the pre-programmed times. For example, the Chronis Smart RTS may open the roller shutters
at 7:30 in the morning during the week and at 10:00 on a Sunday. The Chronis Smart RTS also
enables automatic closing as soon as it gets dark, even if there is nobody at home.
Any linked products can also be opened and closed manually from the Chronis Smart RTS.
The Chronis Smart RTS is used:
as an individual control to control a single product (e.g. one roller shutter or one awning) at •
a time;
as a group control to control several products (e.g. several roller shutters and/or awnings) at •
the same time.
1.2 A few defi nitions
Installation
All of the Radio Technology Somfy products a house is equipped with.
Favourite position:
The favourite position is your ideal position for your product in certain common situations, for
example, take advantage of the sunlight whilst you are dining without being dazzled by the sun;
your blinds partially closed to shield your computer from the afternoon sunlight etc.
Venetian awning (awning in this guide):
All awnings with adjustable slats: interior and exterior awnings.
2. Safety - Important information
2.1 Installation and commissioning
Before installing and using the Chronis Smart RTS, please carefully read this guide, which
describes how to install, commission and operate the Chronis Smart RTS.
Never begin installing without fi rst checking the compatibility of the Chronis Smart RTS with the
associated equipment and accessories.
Any incorrect use will invalidate the warranty and Somfy's liability.
Chronis Smart RTS
3

Copyright © 2008 Somfy SAS. All rights reserved.
2.2 Operating
Somfy recommends that at least one control point is located close to the product or group of -
products.
Do not allow children to play with the fi xed control points. Keep remote controls out of the reach
-
of children.
Monitor the product (especially roller shutter/awning/garage door/gate) while it is moving, espe-
-
cially during commissioning of the Chronis Smart RTS, and keep people at a distance until the
product is completely closed.
Make sure the power supply to the product is turned off before any maintenance operation in the
-
vicinity of the product (for example, when cleaning windows near your awning).
Avoid moving the product if ice has formed in it, unless the motor is fi tted with anti-freeze
-
protection.
Do not immerse or soak the Chronis Smart RTS in any liquid.
-
Only use maintenance products recommended by Somfy. -
Frequently check the product (e.g. awning) to detect any defects in balance or any signs of -
wear. Do not use the product if a repair or adjustment is required.
2.3 Environment
Damaged electrical or electronic products, such as used batteries, should not be disposed of with
household waste. Please take them to a collection point or an approved centre to ensure they
are recycled correctly.
3. Content of the kit and tools required
3.1 List of parts
Before starting installation and commissioning of the Chronis Smart RTS, check that all parts
listed in the table below are present in the correct quan-
tity (Q):
No. Components Q.
1Front cover 1
2Timer 1
3Wall support 1
4Battery: 1.5 V DC (type AAA
LR03)
2
5M3 x 20 mm screw 2
66 mm plug
∅2
3.2 Tools required
• Appropriate screwdriver for the screws to be used
Insulated fl athead electricians screwdriver•
Drill and drill bit•
Pencil•
Chronis Smart RTS
4
3
5
12
46

Copyright © 2008 Somfy SAS. All rights reserved.
4. The Chronis Smart RTS in detail
4.1 Components
A. Up
B. Stop/favourite position
C. Down
D. Screen
E. Menu button
F. S ub-me nu bu tt on (p ara me ter selec tion)
G. Mode button/Settings button
H. PROG button (in the form of a tab, under the front
cover).
4.2 Technical data
Dimensions in mm (Height x width x depth):
80 x 80 x 27 mm
Operating temperature: + 5°C to + 40 °C
Protection rating: Inside use, in a dry room - IP 30
Frequency: 433.42 MHz
Range: 20 m through two concrete walls; 200 m in an
open area
Battery: 2 X 1.5 V DC (type AAA LR03).
5. Before installing the Chronis Smart
RTS
5.1 Turning the Chronis Smart RTS on
- If the front cover (1) of the Chronis Smart RTS is fi tted
to the timer:
Gently press the up and down buttons (never press
-
the screen) to release the timer from the front
cover.
Take the ti mer ( 2) an d t ur n it over.
-
- Remove the plastic strip preventing battery contact:
The standard display appears.
►
The time shows: “0:00”. ►
5.2 Setting the current time and date
5.2.1 Setting the time
- Press the Menu button until “CLOC” appears on
the display:
The standard display will automatically reappear ►
after approximately 20 seconds if there is no
activity.
Press the Sub-menu button
- :
The time display fl ashes.
►
Press the - button to set the time.
If the button is held, the time rapidly increases or
►
decreases.
H
5
5
D
C
B
A
E
F
G
5
5
1
000
:
27
:
(21
S
3
Time
(l 0(
32
:
14
1432
:
0((l
Chronis Smart RTS
5

Copyright © 2008 Somfy SAS. All rights reserved.
- Press the Sub-menu button to confi rm the setting:
The display reverts to “CLOC”.
►
Check the time. -
5.2.2 Setting the date
- Press the Menu button : “DAtE” is displayed.
Press the Sub-menu button
- :
The day display fl ashes.
►
Press the - button to set the day.
Press the Sub-menu button
- :
The month display fl ashes.
►
Press the - button to set the month.
Press the Sub-menu button
- :
The year display fl ashes.
►
Press the - button to set the year.
Press the Sub-menu button
- to confi rm the setting:
The display reverts to “DAtE”. ►
Check the date. -
When the date has been set: -
Press the Menu button - to return to the standard
display.
Caution: On the Chronis Smart RTS, the time automati-
cally changes to daylight saving time/winter time once
the time and date have been set.
(l 0(
32
:
14
Time
08 06
.
0620
08 06
.
0620
08 06
.
0620
0a te
06608
3
.
1432
:
27
:
(21
S
3
0a te
06608
3
.
Yea r
Day.Month
Day
Month
Yea r
6. Adding the Chronis Smart RTS
6.1 Identifying the original control point
6.1.1 Installation recommendations
To add a C hro ni s S mart RT S, u s e t he c ont ro l p oin t l i n ked to the p r o duc t w h i ch only c o n tro ls t h is -
product: pressing the Up or Down button only causes movement of the product to which the new
Chronis Smart RTS must be linked.
Caution! If there is no longer a control point linked to the product (all the control points are broken
or have been lost), contact the Somfy assistance service.
This guide describes how to link a Chronis Smart RTS to a compatible RTS product.
-
To link t h e C h ron is S m art RTS to se ver al p r odu ct s, ide nt ify t he i ndi vi dua l cont ro l p oin t for ea c h -
of the products to be linked and carry out the procedure described in the section entitled “Adding
the Chronis Smart RTS” which corresponds to the original control point.
On some products, inputs in programming mode and the addition or deletion of a control point
-
are signalled by a series of beeps emitted by the motor. On other products this is signalled by a
brief movement of the product.
Place the product in the midway position before installing the new Chronis Smart RTS so that
-
any movements can easily be seen.
Chronis Smart RTS
6

Chronis Smart RTS
7Copyright © 2008 Somfy SAS. All rights reserved.
6.1.2 Original control points
- Identify the original control point in the list below and
refer to the paragraph given to add the new Chronis
Smart RTS:
1) Control point fi tted to the wall with a single button,
called a One-touch point, see paragraph 6.2;
2) Control point fi tted to the wall with Up/STOP/Down
buttons, called a Point with Up/STOP/Down buttons,
see paragraph 6.3;
3) Programmable control point, called a Timer, see
paragraph 6.4;
4) Situo control point fi tted to the wall, see paragraph
6.5;
5a) Telis 1 RTS remote control, see paragraph 6.6;
5b) Telis Soliris RTS remote control, see paragraph 6.6;
6a) Telis 4 RTS remote control, see paragraph 6.7;
6b) Telis 4 Soliris RTS remote control, see paragraph 6.7.
6.2 One-touch point
Move close to the product to install the new Chronis
Smart RTS.
6.2.1 Identifying the model
Check that the original control point has an elongated -
button.
Bring the product to the midway position.
-
Remove the front cover from the one-touch point: -
One-touch point with a white and grey front cover
Gently remove the front cover with a fl at, pointed -
tool (such as a fl athead screwdriver) where the
white section and the grey section join.
Lever it and lift the cover, without using force, to
-
detach the mounting lugs from the front cover.
One-touch point with white front cover
Lever it with a fl at, pointed tool (such as a fl at- -
head screwdriver), without using force, around the
upper section of the front cover to detach it from its
mounting.
- Turn the front cover over to fi nd out the model:
If there is a metal plate inscribed PROG next to the
-
battery: model A.
If there is no metal plate inscribed PROG next to the
-
battery: model B.
3
2
1
6a5b 6b
5a
4
AB

Chronis Smart RTS
8Copyright © 2008 Somfy SAS. All rights reserved.
6.2.2 Adding the Chronis Smart RTS
Model A:
- Make a contact between the PROG metal plate on the
electrical circuit and the battery bracket using a fl at-
head screwdriver until the product moves briefl y (or
there is a series of 3 beeps): the programming function
is activated for approximately 2 minutes.
Take the ne w C hr oni s Smar t RT S .
-
Briefl y press the PROG button (H) on the new Chronis -
Smart RTS:
“PROG” is displayed on the Chronis Smart RTS
►
screen.
The product will make another brief movement (or
►
emit a series of 8 beeps) to indicate that the new
Chronis Smart RTS has been stored.
Press the down button on the new Chronis Smart
-
RTS:
If the product is lowered, the Chronis Smart RTS
►
is operational.
If the product does not move, contact the Somfy
►
assistance service.
Replace the original control point front cover:
-
One-touch point with a white and grey front cover
Insert the mounting lugs into their notches on one -
side of the front cover.
Press on the other side until it clicks, to fi x the front -
cover in its bracket.
One-touch point with a white front cover
Refi t the front cover on its bracket. -
Model B:
- Remove the battery from the original control point using
a fl athead screwdriver.
Press on the centre section of the one-touch point
-
button.
Replace the battery. -
Press the button again until the product moves briefl y -
(or there is a series of 3 beeps): the programming func-
tion is activated for approximately 2 minutes.
Take the ne w C hr oni s Sma rt RT S .
-
Briefl y press the PROG button (H) on the new Chronis -
Smart RTS:
“PROG” is displayed on the Chronis Smart RTS
►
screen.
The product will make another brief movement (or
►
emit a series of 8 beeps) to indicate that the new
Chronis Smart RTS has been stored.
Press the down button on the new Chronis Smart
-
RTS:
If the product is lowered, the Chronis Smart RTS
►
is operational.
If the product does not move, contact the Somfy
►
assistance service.
5
5
H
5
5
H

Chronis Smart RTS
9Copyright © 2008 Somfy SAS. All rights reserved.
Replace the original control point front cover: -
One-touch point with a white and grey front cover
Insert the mounting lugs into their notches on one -
side of the front cover.
Press on the other side until it clicks, to fi x the front
-
cover in its bracket.
One-touch point with a white front cover
Refi t the front cover on its bracket. -
6.3 Point with Up/STOP/Down buttons
Move close to the product to install the Chronis Smart
RTS.
6.3.1 Checking the compatibility
- Bring the product to the midway position.
Cut off the mains power supply or detach the battery
-
connected to the motor (e.g. for a battery operated
roller blind).
Remove the front cover:
-
Gently remove the front cover with a fl at, pointed -
tool (such as a fl athead screwdriver) where the
white section and the grey section join.
Lever it and lift the cover, without using force, to
-
detach the mounting lugs from the front cover.
Turn the front cover over: the PROG button is located
-
next to the battery (b).
Caution! If after removing the front cover, no PROG
button is found, this means that the control point is not
compatible: the Chronis Smart RTS cannot be linked to
the product.
6.3.2 Adding the Chronis Smart RTS
- Switch the mains power supply back on or reconnect
the battery to the motor.
Press the PROG button (b) on the original control point
-
until the product moves briefl y (or a series of 3 beeps
is emitted): the programming function is activated for
approximately 2 minutes.
Take the ne w C hr oni s Sma rt RT S .
-
Briefl y press the PROG button (H) on the new Chronis -
Smart RTS:
“PROG” is displayed on the Chronis Smart RTS
►
screen.
The product will make another brief movement (or
►
emit a series of 8 beeps) to indicate that the new
Chronis Smart RTS has been stored.
Press the down button on the new Chronis Smart
-
RTS:
If the product is lowered, the Chronis Smart RTS
►
is operational.
If the product does not move, contact the Somfy
►
assistance service.
Replace the original control point front cover:
-
Insert the mounting lugs into their notches on one -
side of the front cover.
Press on the other side until it clicks, to fi x the front
-
cover in its bracket.
b
b
5
5
H

Chronis Smart RTS
14 Copyright © 2008 Somfy SAS. All rights reserved.
8. Mounting the Chronis Smart RTS
8.1 Before mounting the Chronis Smart
RTS
Before mounting the Chronis Smart RTS, select a loca-
tion for mounting and check that the Chronis Smart RTS
is able to control all products to which it is linked from
this location.
The minimum distance which must be kept between
RTS enabled products is 30 cm (e.g. 30 cm between any
RTS control points and/or between any control point and
any motor).
Caution! Do not mount the Chronis Smart RTS on a
metal surface.
Select a central location indoors in relation to the posi-
-
tion of the linked products.
Place the Chronis Smart RTS against the wall at the -
selected location.
Press the down button (C) to check that the Chronis
-
Smart RTS controls all products:
If all the products are lowered, the Chronis Smart
►
RTS may be mounted in this location.
If one or more products do not move, move the
►
Chronis Smart RTS and check the operation. If
it still does not work, refer to “Problems with the
Chronis Smart RTS?”.
8.2 Mounting and fi tting
- Mount the wall bracket (3):
Place the bracket against the wall with the retaining
-
bracket at the bottom.
Mark the two holes with a pencil.
-
The two holes must be 50 mm apart and horizon- ►
tally aligned.
Drill the two holes. -
Insert the two plugs (6). -
Mount the wall bracket (3) using the two screws (5). -
Caution! If the screws provided are lost, do not use
roundhead screws. Only use fl athead screws with a
diameter of 6 mm.
Place the timer (2) on the wall bracket (3), with
-
the screen located above the Menu and Sub-
menu buttons:
Slide the timer downwards, into the guide rails until -
it reaches the retaining plate.
Remove the protective fi lm from the screen.
-
Fit the - front cover (1):
Insert the front cover on the timer, allowing the
-
buttons to come through their housings.
Press the front cover until it clicks, indicating that the -
front cover is correctly fi tted to the timer.
3
22
3
1
12
5363

Chronis Smart RTS
15Copyright © 2008 Somfy SAS. All rights reserved.
9.2 Operating
In Program Timer mode, the Chronis Smart RTS controls the automatic opening and closing •
of the product at specifi c times of the day.
It is still possible to control products outside the programmed times by pressing the Up (A), •
Stop/Favourite position (B), or Down (C) buttons.
Caution: Pressing one of these buttons controls the movement of all products linked to the Chronis
Smart RTS at the same time.
9. Everyday use of the Chronis Smart RTS
9.1 How does the Chronis Smart RTS operate?
The Chronis Smart RTS has 3 distinct operating modes:
Program Timer mode,•
Mode without Program Timer•
Vacation mode.•
9.1.1 Program Timer Mode
In Program Timer mode, the Chronis Smart RTS automatically opens and closes the products
daily according to the pre-programmed times.
By default, opening is set to 07:30 during the week and 08:00 on weekends. Closing is set for
sunset (Cosmic mode).
9.1.2 Mode without Program Timer
In this mode, the Chronis Smart RTS is used as a control point with Up/STOP/Down buttons.
Automatic control of the products is deactivated.
Caution: The Chronis Smart RTS only operates in manual mode and all program timer functions
are inhibited.
9.1.3 Vacation Mode
In Vacation mode, the Chronis Smart RTS simulates occupancy by randomly changing the
programmed opening and closing times.
9.1.4 Standard display
After setting the date and time on the Chronis Smart RTS,
the standard display provides the following information:
I. Daylight saving time (S) / Winter time (W)
J. Number of the current day:
1 = Monday, 2 = Tuesday,
3 = Wednesday, 4 = Thursday,
5 = Friday, 6 = Saturday, 7 = Sunday
K. Time
L. Time of the next movement programmed for the
product
M. Closing mode:
“Cosmic” (C)
“Program Timer” (H)
N. Direction of the next movement programmed for
the product:
Down (▼)
Up (▲)
1432
:
27
:
(21
S
3
L
J
NM
K
I

Chronis Smart RTS
16 Copyright © 2008 Somfy SAS. All rights reserved.
9.2.1 Deactivating/Activating the Program Timer
Mode
By default, the Chronis Smart RTS operates in Program
Timer mode.
Deactivating the Program Timer
O
- n the standard display, press the “MODE”
button until “OFF” is displayed instead of the
time of the next programmed movement for the
product (L).
Activating the program timer
O
- n the standard display showing “OFF”, press
the “Mode” button until the display of the
next programmed movement for the product (L) is
shown.
Information on the direction of the next movement
►
of the product (N) and the closing mode (M) are
displayed.
9.2.2 Up and Down Buttons (for shutters)
- Press the Up button (A): all linked products are raised
and automatically stop in the raised/open position.
Press the down button (C): all linked products are
-
lowered and automatically stop in the lowered/closed
position.
To m o ve f r om t h e u p t o t he d o w n d i r ect io n ( a n d v i c e
-
versa), it is not necessary to press the Stop button (B).
Operating mode for venetian blinds
The default operation for the Chronis Smart RTS is
standard and is intended for roller shutters in particular.
To e n a ble t h e a dj ust ab le s lats o n ven etian b l ind s (in te -
rior or exterior) to be controlled, a parameter must be
changed. For further information on this function, visit
Somfy's website (the address may be found on the back
of this guide).
9.2.3 Stop Button
The Stop button (B) has two functions:
A Stop function: briefl y pressing the Stop button •
stops movement of the linked products.
A favourite position function: briefl y pressing the •
Stop button sends the linked products to the favourite
position, if a favourite position has been stored and if
the product is stationary.
For further information on the favourite position function,
visit Somfy's website at the following address:
http://www.somfy.com/mysomfy/
1432
:
27
:
(21
3
32
S
1432
:
ff 0
3
32
S
1432
:
ff0
3
1432
:
27
:
(2 1
3
N
M
L
A
C
5
5
B
5
5
L

Chronis Smart RTS
17Copyright © 2008 Somfy SAS. All rights reserved.
9.2.4 Displaying the date
After the date and time have been set on the Chronis
Smart RTS, the date may be viewed at any moment:
Press the Sub-menu button
- :
O. Day
P. M on th
Q. Year.
The standard display will reappear on the screen
►
after approximately 3 seconds.
This function is available even when the program ►
timer mode has been deactivated.
9.3 Replacing the batteries
Environmental warning! Do not dispose of the used
batteries with the household waste, see paragraph 2.3.
- Remove the front panel (1) from the Chronis Smart
RTS:
Lever it with a fl at, pointed tool (such as a fl athead
-
screwdriver), without using force, around the upper
section of the front cover to remove it.
Slide the timer (2) upwards to release it from the wall
-
bracket (3).
Turn the timer over (2).
-
Remove the used batteries from their housings (4). -
Insert batteries with identical specifi cations, placing the -
+ in the direction indicated on the base of the housing.
Replace the timer (2) on the wall bracket (3), with
-
the screen located above the Menu and Sub-
menu buttons:
Slide the timer downwards, into the guide rails until
-
it reaches the retaining plate.
Refi t the front cover:
-
Insert the front cover on the timer, allowing the -
buttons to come through their housings.
Fit the front cover by pressing it until it clicks.
-
If the standard display is shown on the screen, the -
battery has been replaced correctly.
The time display “0.00” fl ashes: set the time and
►
date (see paragraph 5.2 “Setting the current time
and date”).
Caution: After replacing the batteries, the time and date
must be reset; other programmed parameters will be
retained in the memory.
If nothing appears on the screen:
-
Refer to “Problems with the Chronis Smart RTS?”. -
9.4 Maintenance
Clean the Chronis Smart RTS with a damp cloth using -
a multi-purpose household or glass cleaning product.
Never immerse or soak the Chronis Smart RTS in any
-
liquid.
1432
:
27
:
(21
S
3
06 08
0820
5
O P
Q
12
3
2
4
1
000
:
27
:
(21
S
3

Chronis Smart RTS
18 Copyright © 2008 Somfy SAS. All rights reserved.
10. Customising the programs
10.1 Programs available
10.1.1 Introduction to the programs
To u se the Ch ronis S mart RTS in P r o gram Ti me r mod e, ther e a re d iff e r ent t yp es o f p rogr ams
available which can be confi gured:
Opening the products:
at the same set time during the week - see paragraph 10.3.1,
-
at a different set time depending on the day of the week - see paragraph 10.3.2, -
deactivated during the week - see paragraph 10.3.3, -
deactivated for one or more days during the week - see paragraph 10.3.4, -
based on the same set time every day or different depending on the day of the week with -
a maximum random difference of + or -15 minutes controlled by the vacation mode - see
paragraph 10.5.1,
Closing the products:
based on the “Cosmic” mode during the week - see “What is the Cosmic mode?” for further
-
information - with the possibility of delaying or bringing forward the pre-set time by + or - 1:59
- see paragraphs 10.4.1 and 10.4.2
at the same set time during the week - see paragraph 10.4.3, -
at a different set time depending on the day of the week - see paragraph 10.4.4, -
deactivated during the week - see paragraph 10.4.5, -
deactivated for one or more days during the week - see paragraph 10.4.6, -
based on the same set time every day or different depending on the day of the week, with -
a maximum random difference of + or - 15 minutes controlled by the vacation mode - see
paragraph 10.5.1.
What is the “Cosmic” mode:
- The “Cosmic” mode is programmed to coincide with
nightfall, between 16:30 and 21:30 depending on
the date (see diagram opposite).
The pre-set time in the “Cosmic” mode varies daily
-
in order to adapt to the length of the day in this part
of the world (Europe).
The “Cosmic” mode only applies to a full week.
-
A time difference of between + or - 1:59 can be -
confi gured in relation to the pre-set time.
10.1.2 Pre-programming
During commissioning, the Chronis Smart RTS is in
Program Timer mode and is pre-programmed to control:
Opening the product in the morning at a set time which
-
may be different depending on the day of the week:
from Monday to Friday at 07:30,
-
on weekends at 08:00. -
Closing the products in the evening: -
based on the “Cosmic” mode, -
difference of - 30 minutes.
10.2 How to browse within programs?
On the standard display, press the menu button -
until “CLOC” is displayed:
The standard display will automatically reappear
►
after approximately 20 seconds if the buttons have
not been pressed.
1432
:
27
:
(21
S
3
(l 0(
32
:
14

Chronis Smart RTS
19Copyright © 2008 Somfy SAS. All rights reserved.
E - ach time the Menu button is pressed, a different
program is displayed:
“CLOC”: setting the current time (see paragraph
-
5.2)
“DATE”: setting the date (see paragraph 5.2)
-
“UP”: setting the automatic opening time for the -
products (see paragraph 10.3)
“DN”: setting the automatic closing time for the
-
products (see paragraph 10.4).
Press the Menu button
- several times to return to the
standard display.
10.3 Automatic opening time
This section describes the programs which enable the
products to be automatically opened daily.
10.3.1 The same time every day of the week
This program enables the product to be opened auto-
matically at the same set time during the week.
O
- n the standard display, press the menu until
“CLOC” is displayed.
Press the Menu button
- several times to select the
“Opening time” parameter:
“UP” is displayed.
►
Press the Sub-menu button - :
All days of the week “1234567
►” fl ash.
The programmed time fl ashes.
►
Press the - button to set the time:
The opening time is changed for all days of the
►
week.
Note: Once time has been changed, the Chronis Smart
RTS remembers the change, even if the sub menu button
is not used to confi rm, so if an incorrect time has been
entered, the process must be started again.
Press the Sub-menu button
- several times to return
to the “UP” display and confi rm the settings.
The programmed time is displayed.
►
“H” is displayed: opening is programmed in ►
“program timer” mode.
Press the Menu button
- to return to the standard
display.
10.3.2 A different time every day of the week
This program enables the product to be opened auto-
matically at a different set time depending on the day of
the week.
- On the standard display, press the menu button
until “CLOC” is displayed.
Press the Menu button
- several times to select the
“Opening time” parameter:
“UP” is displayed.
►
up
30
:
t 7
up
30
:
t 7
730
:
meti
123 4 5 6 7
1432
:
27
:
(21
S
3
(l 0(
32
:
14
Programmed
time
(l 0(
32
:
14
up
30
:
t 7
up
30
:
t 7
0a te
06608
3
.
dn
27
:
(21
1432
:
27
:
(21
S
3

Chronis Smart RTS
20 Copyright © 2008 Somfy SAS. All rights reserved.
- Press the Sub-menu button :
All days of the week “1234567
►” fl ash.
The programmed time fl ashes.
►
Press the Sub-menu button - to select the day of the
week for which the opening time is to be changed, for
example, Tuesday:
Number “1” ► (which corresponds to Monday)
fl ashes.
The programmed time fl ashes.
►
EACH ► time the Sub-menu button is pressed
briefl y, the number of the following day fl ashes as
well as the time, which can then be set.
Number “2”
► (Tuesday) fl ashes.
The programmed time fl ashes.
►
Press the - button to set the specifi c time for the
selected day.
Note: Once time has been changed, the Chronis Smart
RTS remembers the change, even if the sub menu button
is not used to confi rm, so if an incorrect time has been
entered, the process must be started again.
Press the Sub-menu button
- several times to return
to the “UP” display and confi rm the settings.
The programmed time for the current day is
►
displayed.
“H” is displayed: opening is programmed in
►
“program timer” mode.
Press the Menu button
- to return to the standard
display.
10.3.3 No automatic opening for the week
This program enables automatic opening of the product
to be deactivated for the week.
- On the standard display, press the menu button
until “CLOC” is displayed.
Press the Menu button
- several times to select the
“Opening time” parameter:
“UP” is displayed.
►
Press the Sub-menu button - :
All days of the week “1234567
►” fl ash.
The programmed time fl ashes.
►
Press the - button to set the time between 23:59
and 00:00:
“OFF” is displayed.
►
Automatic opening of the product has been deac- ►
tivated for all days of the week.
Note: Once time has been changed, the Chronis Smart
RTS remembers the change, even if the sub menu button
is not used to confi rm, so if an incorrect time has been
entered, the process must be started again.
Press the Sub-menu button
- several times to return
to the “UP” display and confi rm the settings.
“OFF” is displayed instead of the
► time.
Press the Menu button
- to return to the standard
display.
730
:
meti
123 4 5 6 7
1432
:
27
:
(21
S
3
730
:
meti
1
Day to be set Programmed
time
730
:
meti
2
up
30
:
t 7
“Timer” mode
Programmed
time for the
current day
(l 0(
32
:
14
up
30
:
t 7
730
:
meti
123 4 5 6 7
1432
:
27
:
(21
S
3
Time
deactivated
up
0fft
Opening
deactivated

Chronis Smart RTS
21Copyright © 2008 Somfy SAS. All rights reserved.
10.3.4 No automatic opening on certain days of the
week
This program enables automatic opening of the product
to be deactivated for certain days of the week.
- On the standard display, press the menu button
until “CLOC” is displayed.
Press the Menu button
- several times to select the
“Opening time” parameter:
“UP” is displayed.
►
Press the Sub-menu button - :
All days of the week “1234567
►” fl ash.
The programmed time fl ashes.
►
Press the Sub-menu - button to select the day of the
week for which automatic opening is to be deactivated,
for example, Tuesday:
Number “1” ► (which corresponds to Monday)
fl ashes.
The programmed time fl ashes.
►
EACH ► time the Sub-menu button is pressed
briefl y, the number of the following day fl ashes as
well as the time, which can then be set.
Number “2”
► (which corresponds to Tuesday)
fl ashes.
The programmed time fl ashes.
►
Press the - button to set the time between 23:59
and 00:00:
“OFF” is displayed.
►
Automatic opening of the product is deactivated ►
for that day.
Note: Once time has been changed, the Chronis Smart
RTS remembers the change, even if the sub menu button
is not used to confi rm, so if an incorrect time has been
entered, the process must be started again.
Press the Sub-menu button
- several times to return
to the “UP” display and confi rm the settings.
The programmed time for the current day is
►
displayed.
Press the Menu button
- to return to the standard
display.
10.4 Automatic closing time
This section describes the programs which enable the
products to be automatically closed daily.
10.4.1 “Cosmic” mode
This program enables the products to be automatically
closed in “Cosmic” mode.
The pre-set times for the “Cosmic” mode vary on a daily
basis to coincide with nightfall, between 16:30 and 21:30
depending on the date.
The “Cosmic” mode only applies to a full week.
- On the standard display, press the menu button
until “CLOC” is displayed.
up
30
:
t 7
1432
:
27
:
(21
S
3
up
30
:
t 7
730
:
meti
123 4 5 6 7
(l 0(
32
:
14
730
:
meti
1
Time
deactivated
730
:
meti
2
Day to be
deactivated
(l 0(
32
:
14

Chronis Smart RTS
22 Copyright © 2008 Somfy SAS. All rights reserved.
Press the Menu button - several times to select the
“Closing time” parameter:
“dn” is displayed.
►
Caution: The closing time may be set following setting
of the opening time. FROM the “UP” display, press the
Menu button to display “dn”.
Press the Sub-menu button - :
“COS” fl ashes, “Cosmic” mode is activated.
►
If “tImE” fl ashes, “program timer” mode is activated: -
Press the - button to switch to “Cosmic” mode.
Press the Sub-menu button
- again:
The time difference in relation to time pre-set for
►
the “Cosmic” mode fl ashes.
Press the
- button to set the time difference to 0:00.
Automatic closing is set to “Cosmic” mode for the
►
week.
Note: Once time has been changed, the Chronis Smart
RTS remembers the change, even if the sub menu button
is not used to confi rm, so if an incorrect time has been
entered, the process must be started again.
Press the Sub-menu button
- to return to the “dn”
display and confi rm the settings.
The programmed time for the current day is
►
displayed.
«“C”» is displayed: closing is programmed in
►
“Cosmic” mode.
Press the Menu button
- to return to the standard
display.
10.4.2 “Cosmic” mode with programmed time
difference
This program enables the product to be automatically
closed in “Cosmic” mode with a time difference in rela-
tion to the pre-set time.
The “Cosmic” mode only applies to a full week, so the
programmed time difference will be applied to every day
of the week.
- On the standard display, press the menu button
until “CLOC” is displayed.
Press the Menu button
- several times to select the
“Closing time” parameter:
“dn” is displayed. ►
Caution: The closing time may be set following setting of
the opening time. From the “UP” display, press the Menu
button to display “dn”.
Press the Sub-menu button
- :
“COS” fl ashes, “Cosmic” mode is activated.
►
If “tImE” fl ashes, “program timer” mode is activated: -
Press the - button to switch to “Cosmic” mode.
Press the Sub-menu button
- again:
The time difference in relation to time pre-set for
►
the “Cosmic” mode fl ashes.
Press the
- button to set the time difference:
It should be between -1:59 and 1:59.
►
A negative value means that automatic closing ►
will take place earlier than the pre-set time in the
(0s
dn
030
:
ff(0i
Time
difference
dn
27
:
(21
1432
:
27
:
(21
S
3
dn
27
:
(21
“Cosmic”
mode Programmed
time
(0s
dn
030
:
ff(0i
Time
difference
dn
27
:
(21
(l 0(
32
:
14

Chronis Smart RTS
23Copyright © 2008 Somfy SAS. All rights reserved.
“Cosmic” mode.
A positive value means that automatic closing
►
will take place later than the pre-set time in the
“Cosmic” mode.
For example, on a day when the “Cosmic” mode is
►
set for automatic closing at 19:00: if the time differ-
ence is set to “- 0:45”, the product will be closed at
18:15, and if the time difference is set to “1:20”, the
product will be closed at 20:20.
Automatic closing is set in the “Cosmic” mode with an
►
identical time difference for every day of the week.
Note: Once time has been changed, the Chronis Smart
RTS remembers the change, even if the sub menu button
is not used to confi rm, so if an incorrect time has been
entered, the process must be started again.
- Press the Sub-menu button to return to the “dn”
display and confi rm the settings.
The programmed time for the current day is
►
displayed.
“C” is displayed: closing is programmed in
►
“Cosmic” mode.
Press the Menu button
- to return to the standard
display.
10.4.3 The same time every day of the week
This program enables the product to be closed automati-
cally at the same set time during the week.
- On the standard display, press the menu button
until “CLOC” is displayed.
Press the Menu button
- several times to select the
“Closing time” parameter:
“dn” is displayed.
►
Caution: The closing time may be set following setting
of the opening time. FROM the “UP” display, press the
Menu button to display “dn”.
Press the Sub-menu button
- :
“tImE” fl ashes, “program timer” mode is activated.
►
If “COS” fl ashes, “Cosmic” mode is activated: -
Press the - button to switch to “program timer”
mode.
Press the Sub-menu
- button again:
All days of the week “1234567 ►” fl ash.
The programmed time fl ashes.
►
Press the - button to set the time:
The closing time is changed for all days of the ►
week.
Note: Once time has been changed, the Chronis Smart
RTS remembers the change, even if the sub menu button
is not used to confi rm, so if an incorrect time has been
entered, the process must be started again.
Press the Sub-menu
- button several times to return
to the “dn” display and confi rm the settings.
The programmed time is displayed.
►
“H” is displayed: closing is programmed in ►
“program timer” mode.
Press the Menu button
- to return to the standard
display.
1432
:
27
:
(21
S
3
dn
27
:
(21
“Cosmic” mode Programmed
time
(l 0(
32
:
14
dn
27
:
(21
1432
:
27
:
t21
S
3
dn
27
:
t21
“Timer” mode Programmed
time
ti
dn
“Timer” mode
20 00
:
tti
12 3 4 567
Week Programmed
time

Chronis Smart RTS
24 Copyright © 2008 Somfy SAS. All rights reserved.
10.4.4 A different time every day of the week
This program enables the products to be closed auto-
matically at a different set time depending on the day of
the week.
Caution: If automatic closing is set to “program timer”
mode for one or more days, the rest of the week cannot
be set to use the “Cosmic” mode but may only use the
“program timer” mode.
- On the standard display, press the menu button
until “CLOC” is displayed.
Press the Menu button
- several times to select the
“Closing time” parameter:
“dn” is displayed.
►
Caution: The closing time may be set following setting
of the opening time. FROM the “UP” display, press the
Menu button to display “dn”.
Press the Sub-menu button
- :
“tImE” fl ashes, “program timer” mode is activated.
►
If “COS” fl ashes, “Cosmic” mode is activated: -
Press the - button to switch to “program timer”
mode.
Press the Sub-menu
- button again:
All days of the week “1234567
►” fl ash.
The programmed time fl ashes.
►
Press the Sub-menu button - to select the day of the
week for which the closing time is to be changed, for
example, Tuesday:
Number “1”
► (which corresponds to Monday)
fl ashes.
The programmed time fl ashes.
►
EACH ► time the Sub-menu button is pressed
briefl y, the number of the following day fl ashes as
well as the time, which can then be set.
Number “2” ► (Tuesday) fl ashes.
The programmed time fl ashes.
►
Press the - button to set the specifi c time for the
selected day.
Note: Once time has been changed, the Chronis Smart
RTS remembers the change, even if the sub menu button
is not used to confi rm, so if an incorrect time has been
entered, the process must be started again.
Press the Sub-menu
- button several times to return
to the “dn” display and confi rm the settings.
The programmed time for the current day is
►
displayed.
“H” is displayed: closing is programmed in ►
“program timer” mode.
Press the Menu button
- to return to the standard
display.
(l 0(
32
:
14
ti
dn
20 00
:
tti
1
dn
27
:
t21
20 00
:
tti
12 3 4 567
1432
:
27
:
t21
S
3
20 00
:
tti
2
Day to be
set Programmed
time
dn
27
:
t21
“Timer” mode Programmed
time for the
current day