Sony DVS-7000A User manual

DIGITAL VIDEO SWITCHER
DVS-7000A
INSTALLATION MANUAL
1st Edition
BKDS-7021/7021R/7021LR
BKDS-7022/7022R/7022LR
BKDS-7023/7023R/7023LR
TYPE-3D SWITCHER CONTROL PANEL
BKDS-7011/7011R/7011LR
BKDS-7012
TYPE-4D SWITCHER CONTROL PANEL
BKDS-7270
BKDS-7271
BKDS-7280
BKDS-7420
BKDS-7445
BKDS-7690
BZS-7020A
BKDS-2031
BKDS-2032
BKDS-2041
BKDS-2070
BKDS-7001
BKDS-7030
BKDS-7031
BKDS-7032
BKDS-7033
BKDS-7075
BKDS-7090
BKDS-7103
BKDS-7110
BKDS-7111
BKDS-7113
BKDS-7133
BKDS-7161
BKDS-7163

!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
!WARNUNG
DieAnleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
!AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien.Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
DVS-7000A Serial No. 10001 and Higher
BKDS-2031 Serial No. 10001 and Higher
BKDS-2032 Serial No. 10001 and Higher
BKDS-2041 Serial No. 10001 and Higher
BKDS-2070 Serial No. 10001 and Higher
BKDS-7001 Serial No. 10001 and Higher
BKDS-7011 Serial No. 10001 and Higher
BKDS-7012 Serial No. 10001 and Higher
BKDS-7021 Serial No. 10001 and Higher
BKDS-7022 Serial No. 10001 and Higher
BKDS-7023 Serial No. 10001 and Higher
BKDS-7011R Serial No. 10001 and Higher
BKDS-7021R Serial No. 10001 and Higher
BKDS-7022R Serial No. 10001 and Higher
BKDS-7023R Serial No. 10001 and Higher
BKDS-7011LR Serial No. 10001 and Higher
BKDS-7021LR Serial No. 10001 and Higher
BKDS-7022LR Serial No. 10001 and Higher
BKDS-7023LR Serial No. 10001 and Higher
BKDS-7030 Serial No. 10001 and Higher
BKDS-7031 Serial No. 10001 and Higher
BKDS-7032 Serial No. 10001 and Higher
BKDS-7033 Serial No. 10001 and Higher
BKDS-7075 Serial No. 10001 and Higher
BKDS-7090 Serial No. 10001 and Higher
BKDS-7103 Serial No. 10001 and Higher
BKDS-7110 Serial No. 10001 and Higher
BKDS-7111 Serial No. 10001 and Higher
BKDS-7113 Serial No. 10001 and Higher
BKDS-7133 Serial No. 10001 and Higher
BKDS-7161 Serial No. 10001 and Higher
BKDS-7163 Serial No. 10001 and Higher
BKDS-7270 Serial No. 10001 and Higher
BKDS-7271 Serial No. 10001 and Higher
BKDS-7280 Serial No. 10001 and Higher
BKDS-7420 Serial No. 10001 and Higher
BKDS-7445 Serial No. 10001 and Higher
BKDS-7690 Serial No. 10001 and Higher
BZS-7020A Serial No. 10001 and Higher

WARNING
This unit has no power switch.
When installing the unit, incorporate a readily
accessible disconnect device in the fixed wiring, or
connect the power cord to a socket-outlet which must be
provided near the unit and easily accessible, so that the
user can turn off the power in case a fault should occur.
WARNUNG
Dieses Gerät hat keinen Netzschalter.
Beim Einbau des Geräts ist daher im Festkabel ein leicht
zugänglicher Unterbrecher einzufügen, oder das
Netzkabel mu
ß mit einer in der Nähe des Geräts
befindlichen, leicht zugänglichen Wandsteckdose
verbunden werden, damit sich bei einer
Funktionsstörung die Stromversorgung zum Gerät
jederzeit unterbrechen lä
ß t
Attention-when the product is installed in Rack:
1. Prevention against overloading of branch circuit
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
make sure that the rack does not overload the supply
circuit.
2. Providing protective earth
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
confirm that the outlet is provided with a suitable
protective earth connection.
3. Internal air ambient temperature of the rack
When this product is installed in a rack, please make
sure that the internal air ambient temperature of the
rack is within the specified limit of this product.
4. Prevention against achieving hazardous
condition due to uneven mechanical loading
When this product is installed in a rack, please make
sure that the rack does not achieve hazardous
condition due to uneven mechanical loading.

1
DVS-7000AE IM
Table of Contents
Manual Structure
Purpose of this manual .............................................................................................. 3
About the model names of the control panels ........................................................... 3
Contents ..................................................................................................................... 4
Related manuals......................................................................................................... 5
1. Installation
1-1. Operating Environment...............................................................................1-1
1-2. Power Supply ..............................................................................................1-1
1-2-1. Power Switch for Service (Control panel) .................................1-1
1-2-2. Power Specifications ..................................................................1-1
1-2-3. Power Cord.................................................................................1-1
1-3. Connectors...................................................................................................1-2
1-4. Input and Output Signals of Connectors .....................................................1-3
1-4-1. DVS-7000A................................................................................1-3
1-4-2. Control Panel..............................................................................1-6
1-5. Examples of System Connection ..............................................................1-11
2. Installation of DVS-7000A
2-1. External Dimensions ...................................................................................2-1
2-2. Rack Mounting............................................................................................2-2
3. Installation of Control Panel
3-1. External Dimensions ...................................................................................3-1
3-2. Installation Space ........................................................................................3-9
3-3. Installation of MAIN PANEL...................................................................3-12
3-4. Installation of DISPLAY PANEL.............................................................3-13
3-5. Installation of AUX BUS PANEL
(Only BKDS-702x, 702xR and 702xLR)..................................................3-14
3-6. Installation of Ten Key Unit (Only BKDS-70xxR/70xxLR)....................3-14
3-7. Connection of Control Panel.....................................................................3-14
3-8. Replacement of Key Tops.........................................................................3-15

2DVS-7000AE IM
4. Installation of Options
4-1. Installation of Plug-in Boards .....................................................................4-2
4-2. Combination of Optional boards .................................................................4-4
4-2-1. Function of Optional Boards ......................................................4-4
4-2-2. Relation between Optional Boards and
Rear Panel Connectors ...............................................................4-4
4-3. Installation of Options for DVS-7000A ......................................................4-6
4-3-1. Detaching and Attaching of Front Panel ....................................4-6
4-3-2. Inserting/Pulling Out of Plug-in Boards ....................................4-7
4-3-3. Installation of Optional Boards ..................................................4-9
4-3-4. Installation of BKDS-7690 (Redundant Power Supply Unit) ..4-12
4-4. Installation of Options for Control Panel ..................................................4-13
4-4-1. Opening and Closing of Panel..................................................4-13
4-4-2. Turning On/Off the Power Switch ...........................................4-14
4-4-3. Installation of BKDS-7001 (Control Port Expansion Board) ..4-15
4-4-4. Installation of BKDS-7031 Track Ball ....................................4-16
4-4-5. Installation of Option Panels (BKDS-7030/7031/7032/7033) .4-18
4-4-6. Joining of BKDS-7075 (Control Panel Remote Adaptor) .......4-29
4-4-7. Installation of BKDS-7090 (Redundant Power Supply Unit) ..4-33
5. Confirmation in Installation
5-1. Switch Settings on Boards and LEDs Description......................................5-1
5-1-1. DVS-7000A................................................................................5-1
5-1-2. BKDS-7133 ................................................................................5-6
5-1-3. Control Panel ..............................................................................5-6
5-1-4. BKDS-7090 ..............................................................................5-12
5-2. Adjustment of Secondary Power Supply Voltage.....................................5-13
5-2-1. DVS-7000A..............................................................................5-13
5-2-2. Control Panel ............................................................................5-15
5-3. Adjustment of Operation Power for Fader Lever .....................................5-17
6. Initial Set-up of System
6-1. Operation and Saving of Set-up Data..........................................................6-1
6-2. Installation of Program (BZS-7020A) ........................................................6-4
6-2-1. Down Load of Program ..............................................................6-5
6-2-2. Initializing of Data on RAM ......................................................6-7
6-2-3. Initializing of “Nonvolatile Memory” ........................................6-8
6-3. Set-up ..........................................................................................................6-9
6-3-1. Confirmation of the Software Version .....................................6-10
6-3-2. Setting of the Signal Format ....................................................6-10
6-3-3. Setting about the System ..........................................................6-11
6-3-4. Saving Set-up Data to Nonvolatile Memory ............................6-12

DVS-7000AE IM 3
Purpose of this manual
This manual is the installation manual of Digital Video Switcher DVS-7000A.
This manual is intended for use by trained system and service engineers, and
describes the information when installing DVS-7000A.
About the model names of the control panels
This manual is described the model name of the control panels as shown the table
below.
Manual Structure
Model name Short model name Shortest model name
BKDS-7011 BKDS-701x BKDS-70xx
BKDS-7012
BKDS-7021 BKDS-702x
BKDS-7022
BKDS-7023
BKDS-7011R BKDS-701xR BKDS-70xxR
BKDS-7021R BKDS-702xR
BKDS-7022R
BKDS-7023R
BKDS-7011LR BKDS-701xLR BKDS-70xxLR
BKDS-7021LR BKDS-702xLR
BKDS-7022LR
BKDS-7023LR

4DVS-7000AE IM
Contents This manual is organized by following sections.
Section 1 Installation
This section describes the operating environment, power supply, connectors, input
and output signals of connectors, and example of system connection.
Section 2 Installation of DVS-7000A
This section describes the external dimensions and rack mounting.
Section 3 Installation of Control panel
This section describes the external dimensions, installation space, rack mounting and
replacement of key tops.
Section 4 Installation of Options
This section describes the installation of plug-in boards, combinations of optional
boards and installation of options.
Section 5 Confirmation in Installation
This section describes the switch settings on boards and LEDs description, Adjust-
ment of secondary power supply voltage and adjustment of operation power for
fader lever.
Section 6 Initial Set-up of System
This section describes the operation and saving of set-up data, installation of pro-
gram, set-up, saving set-up data to nonvolatile memory.

DVS-7000AE IM 5
Related manuals The following manuals are prepared for DVS-7000A.
The part numbers of these manuals as of February, 1999 describe.
..
..
.User’s Guide (Supplied with BZS-7020A)
This manual describes the application and operation of DVS-7000A.
..
..
.Operation Manual (Supplied with DVS-7000A)
This manual describes the overview, system configuration examples and specifications of
options.
..
..
.Maintenance Manual Part 1 (Supplied with DVS-7000A)
This manual describes the information for the periodic maintenance, and the
information for the service with predicated on the replacement of the principal
blocks and mounted circuit boards.
Part number : 3-201-864-01
..
..
.Maintenance Manual Part 2
The following manuals describe the detailed service information. For obtaining,
please contact your local Sony’s sale/service office.
Volume 1 (Block diagrams and Frame wirings)
Part number : 9-967-615-03
Supplement 4 Part number : 9-967-615-84
Volume 2
(Spare parts, Service overview and Replacement of main parts)
Part number : 9-967-616-03
Supplement 5 Part number : 9-967-616-85
Volume 3 (Semiconductor pin assignments)
Part number : 9-967-617-03
Supplement 3 Part number : 9-967-617-83
Volume 4 (Board layouts)
Part number : 9-967-618-03
Supplement 4 Part number : 9-967-618-84
Volume 5 (Schematic diagrams 1 A through I)
Part number : 9-967-624-03
Supplement 3 Part number : 9-967-624-83
Volume 6 (Schematic diagrams 2 K through Z)
Part number : 9-967-625-02
Supplement 4 Part number : 9-967-625-84