Sound Devices 633 User manual

Six-Input Compact Mixer
with Integrated 10-Track Recorder
QUICK START GUIDE
633

Quick Start Guide
633 Mixer & Recorder
Read and Register...
Sound Devices strongly encourages you to register your product. Registration extends your warranty
and ensures you will receive timely updates.
For a full description of all product features, user-based procedures, specications, and safety informa-
tion, please refer to the product’s User Guide located on the Sound Devices website. Use the QR code
or respective link to access and download the guide.
Full User Guide:
http://www.sounddevices.com/download/guides/633ug_en.pdf
Register Your 633:
www.sounddevices.com/support/registration/
Email Support:
[email protected]
Call Support:
1-608-524-0625
1-800-505-0625
Welcome
Thank you for purchasing the 633 Compact Mixer and Recorder. This Quick Start Guide provides the
initial steps necessary to set up and begin using the 633 right out of the box. It also provides warranties
and legal, Declaration of Conformity information.
The following table shows what is included with a basic purchase.
Quantity item
1 633 Compact Mixer and Recorder
1 USB Cable (USB Standard A to USB Standard B)
1 USB Adapter (USB Standard A Female to Female)
1 LCD Protective Cover
4 Adhesive Rubber “Bumpers”
3 Colored Dot Stickers
1 Registration Card
If you purchased the complete Accessories Kit (shown below) with your 633, here is what you get:
❑1 CS-633 Production Case
❑1 CF Card
❑1 SD Card
❑2 XL-B2 7.2v Li-Ion L-Series Batteries
❑2 TA3-F to XLR-M Cables
❑3 TA3-F to XLR-F Cables
❑1 LEMO®-5 to BNC In/BNC Out
Timecode Jam Cable
After receiving your kit, remove all contents from the box to ensure there are no missing parts and that
all parts were received without damage.
23

Quick Start Guide
633 Mixer & Recorder
1. Attach Power
Connect at least one power source, such as L-Series Lithium Ion
batteries.
To mount an L-Series battery:
1. Place the 633 on a stable surface.
2. Position the battery so the two terminals on the battery line up with
the tips of the two pins on the rear panel of the 633.
3. Press the battery against the unit and slide the battery onto the pins.
The battery retainer clip will spring up with a satisfying click to let you
know the battery is secure.
The 633 can mount up to two Li-Ion batteries, but it can also be powered
from external DC power or from internal AA batteries .
When multiple sources are connected, the 633 will use one source at
a time, using rst external power, then the Li-Ion batteries, then the AA
batteries.
To connect the 633 to external power:
▶Plug a DC power source (not included) into the DC input on the right panel.
To insert AA batteries:
1. Unscrew the battery cap (counter-clockwise).
2. Insert six AA NiMH batteries (not included) into the battery tubes. Orient the top three batteries
with the positive (+) end facing in and the bottom three batteries with the negative (-) end facing in.
Li-Ion battery Pin
Pin
3. Connect Audio Source
Located on the left panel of the 633, there are three XLR-3F connectors for
active-balance analog microphone or line-level inputs.
To connect an audio source:
▶Use a standard XLR cable and connect a microphone or line level analog
source to Input 1.
Note: Input 1 can also accept AES3 or AES42 (Mode 1) signal.
[Pin-1 ground, pin-2 positive, pin-3 negative.]
4. Power on Input
To power the input:
1. If the Trim control for Input 1 is recessed,
push it in and it will pop out.
2. Turn the trim control clockwise until it clicks
to power on the input.
Note: The input power is off when the Trim control is
fully rotated counter-clockwise.
2. Power Up
To turn on your 633:
▶Slide the Power button to the right.
The green power LED illuminates, the Sound Devices splash screen will ap-
pear on the LCD, and then the Main Screen is displayed.
Note: PowerSafe™ circuitry in the 633 provides a 10-second power reserve allowing
the device to properly stop le operations and safely shut down in the unlikely event
of total power loss.
Power LED
Input 1
XLR Connector
Input 1 Trim
Trim Control
45

Quick Start Guide
633 Mixer & Recorder
5. Select Input Type
To select input type:
1. Slide the Pre-Fade Listen (PFL) switch to the left to access the Input
Settings Screen for Input 1.
Note: Step 1 is based on factory defaults. If sliding the switch to the left does not
display the Input Settings Screen, then the PFL Toggle Mode is not set to its 6-Channel
default. When the PFL Toggle Mode is set to only 3 Channels, you must slide the PFL
switch to the right instead of the left to display the Input Settings Screen.
2. Press the Headphone encoder to display the list of available types.
PFL Switch
6. Connect Headphones
Connect headphones to the 1/4-inch headphone output, located on the
right panel of the 633.
7. Select a Headphone Source
To set up the headphone source, from the Main screen:
1. Press the Headphone encoder to display the list of available sources.
2. Turn the encoder to choose LR ST, the master left and right stereo bus.
3. Press the Headphone encoder to conrm selection.
Headphone
Encoder
Media Door
8. Insert and Format Media
The slots for CompactFlash (CF) or Secure Digital (SD) memory cards are located on the right panel
behind the Media Door, which is held closed magnetically. Firmly pull the door to open it.
To install media:
1. Firmly pull open the Media Door.
2. Insert your choice of approved media memory card into the slots provided.
Headphone
Encoder
3. Turn the encoder to highlight an input type and press it in to make your selection.
• MIC – Use this type for a dynamic microphone.
• MIC-PH – Use this type for microphones requiring phantom power.
• LINE – Use this type for analog line level sources.
• LINE-PH – Use for phantom-powered condenser microphones. Provides 48V or 12V phan-
tom power.
• AES42 – Use this type for a digital AES42 (Mode 1) microphone.
• AES3 – Use this type for a digital AES3 microphone.
Note: Never attach unbalanced connections to an input set for AES42. This can result in damage to the hardware.
4. Slide the PFL switch to the left again to return to the Main screen.
67

Quick Start Guide
633 Mixer & Recorder
To (re)format an SD or CF card:
1. Press the MENU button.
2. Turn the Headphone encoder and press it to select File Storage.
3. Do either of the following:
• Select Erase/Format CF to reformat a CompactFlash card.
• Select Erase/Format SD to reformat a Secure Digital card.
4. Press the Headphone encoder to begin the formatting process.
5. Read any warning message(s) and press the Headphone encoder to
continue.
6. Press the METERS button to return to the Main screen.
Stop
(press in)
Record (push up)
9. Start and Stop Recording
To begin recording:
▶Push up the Transport control to record.
To stop recording:
▶Press in the Transport control to stop recording.
While recording, the Take name background color (top of Main screen)
becomes red, and the absolute time counter (bottom of Main screen) runs.
10. Remove Media to Transfer Files
When recording is complete, ensure the CF and SD indicators (in top right
corner of Main screen) are no longer glowing amber before removing the
memory card(s). Once removed from the 633, the memory cards may then
be connected to a computer for transfer and backup of recorded les.
To remove the CF card:
▶Open the Media Door and pull out the card.
To remove the SD card:
1. Open the Media Door.
2. Push card in to release it, and then pull it out.
11. Force Power Off (Optional)
In the unlikely event you need to manually force a complete shutdown of the
633, by-passing the PowerSafe and QuickBoot™ features, do the following:
To force power off to the mixer:
1. Slide the Power button to the left.
2. Press and hold the MENU button for 5 seconds.
CF Memory
Card Slot
SD Memory
Card Slot
METERS
Button
Headphone
Encoder
MENU
Button
Transport
Control
When inserting the SD card, ensure the bottom of the card (the side with metal contacts visible) is
facing the rear of the unit. When inserting a CF card, ensure the top of the card (the side with the
branding label) is facing the rear of the unit.
Note: Sound Devices Quality Assurance engineers perform extensive testing to ensure media approved for use with
the 633 works reliably and provides the best performance. When choosing media, please refer to the Approved
Media List available on the Sound Devices website at: www.SoundDevices.com/Approved
The SD or CF card must be formatted by the 633 before recording.
Warning: Reformatting a card will erase all data on the card.
89

Quick Start Guide
633 Mixer & Recorder
This sample image shows default settings. Meter style can be changed to solid, and track names can
optionally be shown in the meters. Pressing the Meters button from the Main screen cycles through
the Meter Views. Use the Main menu option: System > Meter Views to dene which one of various
congurations is used by each Meter View.
Trim and Faders
The gain of an input is adjusted by two controls, Input Trim and Input Fader. This two-stage architec-
ture is identical to the topology of large mixing consoles and provides a great deal of control. Input
Trim is often thought of as a course gain control and the Input Fader as the ne gain control.
For more information on the features of the 633 as well as specications, procedures, tips and more,
read the 633 User Guide, available as a free, full-color download (PDF) from the company’s website:
http://www.sounddevices.com/download/guides/633ug_en.pdf
Accessories
The 633 works with various accessories, which may be included with the KIT or purchased separately,
and used to further enhance your eld mixing and recording experience.
aCCeSSORy PHOtO DeSCRiPtiOn
CS633 This production case (designed by PortaBrace for
Sound Devices) is used for the 633. The front pocket
provides space for wireless receivers and NP-1 battery.
A bottom panel opens and expands to provide access
to rear-mounted L Series batteries.
CL-12 This optional linear fader controller attaches to the the
633 and adds dedicated, smooth-gliding linear faders,
sunlight-viewable LED metering, big, back-lit Record
and Stop controls, and other illuminated quick-access
buttons for key functionality.
This table is not an all-inclusive list of accessories available for use with the 633. For the latest information, visit the
Sound Devices website at: www.sounddevices.com
Input tracks
Bus tracks
Armed track
Current take CF time remaining and audio file format
Active playback media
SD time remaining and audio file format
Power source & level
Sample rate information RTN level
Monitor (Headphone) information
(Displays HP level during adjust-
ment)
Input limiting activity
Meter View
SMPTE Timecode
Absolute recording time
Unarmed track
Powered off Input
633 Overview
Main Screen Elements
The Main screen displays important information at-a-glance. The Main screen can be accessed quick-
ly from any other screen by pressing the METERS button. Press and hold the METERS button, and
then slide the RTN / FAV switch (below the screen) to the left to toggle between display of timecode
frame rate and sample rate.
Input 1 Fader Input 2 Fader Input 3 Fader
Input 1 Trim
Input 2 Trim Input 3 Trim
Inputs 4, 5, and 6 Trim
in Input Settings screen
Input 4 Fader Input 5 Fader Input 6 Fader
10 11

Quick Start Guide
633 Mixer & Recorder
Warranty and Service
Sound Devices, LLC warrants the 633 against defects in materials and workmanship for a period of ONE (1) year from date of original
retail purchase. Users who register their product directly with Sound Devices Technical Support by mail, online, or phone, will receive an
additional ONE (1) year of warranty coverage, extending the complete warranty period to TWO (2) years from the date of original retail
purchase. In order to extend the warranty coverage period, registration must be completed within the initial ONE (1) year warranty peri-
od. Products must be purchased through authorized Sound Devices resellers to qualify for Warranty coverage. Damage resulting from
the opening of a Sound Devices product or attempted repairs by a non-authorized Sound Devices repair technician will void warranty
coverage.
This is a non-transferable warranty that extends only to the original purchaser. Sound Devices, LLC will repair or replace the product at its
discretion at no charge. Warranty claims due to severe service conditions will be addressed on an individual basis.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE. SOUND DEVICES, LLC DISCLAIMS ALL OTHER WARRANTIES, EX-
PRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOUND DEVICES,
LLC IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF WARRANTY OR
UNDER ANY OTHER LEGAL THEORY. Because some jurisdictions do not permit the exclusion or limitations set forth above, they may not
apply in all cases.
For all service, including warranty repair, please contact Sound Devices for an RMA (return merchandise authorization) before sending
your unit in for repair. Product returned without an RMA number may experience delays in repair. When sending a unit for repair, please
do not include accessories, including SSD drives, CF cards, batteries, power supplies, carry cases, cables, or adapters unless instructed
by Sound Devices. Sound Devices repairs and replacements may be completed using refurbished, returned or used parts that have been
factory certied as functionally equivalent to new parts.
Sound Devices, LLC
Service Repair RMA #XXXXX
E7556 State Road 23 and 33
Reedsburg, WI 53959 USA
Telephone: [phone]
Technical Support / Bug Reports
For technical support and bug reporting on all Sound Devices products contact Sound Devices, LLC at:
E-mail: suppor[email protected]
Website: www.sounddevices.com/support/
Phone: [phone]
Toll-free: [phone] — in USA only
Fax: [phone]
Sound Devices hosts a user support forum. The URL is: http://forum.sounddevices.com
Fill In and Keep for Your Records
PRODUCT: _____________________________________________
SERIAL NUMBER: _____________________________________________
PURCHASE DATE: _____________________________________________
STORE/RETAILER: _____________________________________________
ADDITIONAL NOTES: ___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
12 13

Quick Start Guide
633 Mixer & Recorder
Declaration of Conformity
According to EN ISO/IEC 17050-1:2004
Manufacturer’s Name: Sound Devices, LLC
Manufacturer’s Address: E7556 State Road 23 and 33
Reedsburg, WI 53959
USA
Declares under sole responsibility that the product as delivered
Product Name: 633 Compact Mixer and Recorder
Model Number: 633
Product Options: This declaration covers all options of the above product.
complies with the essential requirements of the following applicable European Directives,
and carries the CE marking accordingly:
EMC Directive (2004/108/EC)
EN 55022:2010
EN 55103-2:2009
First date of CE approval July 18, 2013.
This Declaration of Conformity applies to the above-listed product(s) placed on the EU market after:
July 18, 2013
Date Matt Anderson
President
Legal Notes
Product specifications and features are subject to change without prior notification.
Copyright © 2016
Sound Devices, LLC.
All rights reserved.
This document is protected under copyright law. An authorized licensee of this product may reproduce this publication for the licensee’s
own personal use. This document may not be reproduced or distributed, in whole or in part, for commercial purposes, such as selling
copies or providing educational services or support. This document is supplied as a technical guide for 633. Special care has been taken
in preparing the information for publication; however, since product specications are subject to change, this document might contain
omissions and technical or typographical inaccuracies. Sound Devices, LLC does not accept responsibility for any losses due to the use
of this guide.
Limitation of Liability
LIMITATION ON SOUND DEVICES’ LIABILITY. SOUND DEVICES, LLC SHALL NOT BE LIABLE TO THE PURCHASER OF THIS PRODUCT OR
THIRD PARTIES FOR DAMAGES, LOSSES, COSTS, OR EXPENSES INCURRED BY PURCHASER OR THIRD PARTIES AS A RESULT OF: ACCI-
DENT, MISUSE, OR ABUSE OF THIS PRODUCT OR UNAUTHORIZED MODIFICATIONS, REPAIRS, OR ALTERATIONS TO THIS PRODUCT, OR
FAILURE TO STRICTLY COMPLY WITH SOUND DEVICES, LLC’S OPERATING AND INSTALLATION INSTRUCTIONS. TO THE FULLEST EXTENT
PERMITTED BY LAW, SOUND DEVICES SHALL HAVE NO LIABILITY TO THE END USER OR ANY OTHER PERSON FOR COSTS, EXPENSES,
DIRECT DAMAGES, INCIDENTAL DAMAGES, PUNITIVE DAMAGES, SPECIAL DAMAGES, CONSEQUENTIAL DAMAGES OR OTHER DAMAGES
OF ANY KIND OR NATURE WHATSOEVER ARISING OUT OF OR RELATING TO THE PRODUCTS, THESE TERM/S AND CONDITIONS OR THE
PARTIES’ RELATIONSHIP, INCLUDING, WITHOUT LIMITATION, DAMAGES RESULTING FROM OR RELATED TO THE DELETION OR OTHER
LOSS OF AUDIO OR VIDEO RECORDINGS OR DATA, REDUCED OR DIMINISHED AUDIO OR VIDEO QUALITY OR OTHER SIMILAR AUDIO OR
VIDEO DEFECTS ARISING FROM, RELATED TO OR OTHERWISE ATTRIBUTABLE TO THE PRODUCTS OR THE END USER’S USE OR OPERATION
THEREOF, REGARDLESS OF WHETHER SUCH DAMAGES ARE CLAIMED UNDER CONTRACT, TORT OR ANY OTHER THEORY. “CONSEQUEN-
TIAL DAMAGES” FOR WHICH SOUND DEVICES SHALL NOT BE LIABLE SHALL INCLUDE, WITHOUT LIMITATION, LOST PROFITS, PENALTIES,
DELAY DAMAGES, LIQUIDATED DAMAGES AND OTHER DAMAGES AND LIABILITIES WHICH END USER SHALL BE OBLIGATED TO PAY OR
WHICH END USER OR ANY OTHER PARTY MAY INCUR RELATED TO OR ARISING OUT OF ITS CONTRACTS WITH ITS CUSTOMERS OR OTHER
THIRD PARTIES. NOTWITHSTANDING AND WITHOUT LIMITING THE FOREGOING, IN NO EVENT SHALL SOUND DEVICES BE LIABLE FOR
ANY AMOUNT OF DAMAGES IN EXCESS OF AMOUNTS PAID BY THE END USER FOR THE PRODUCTS AS TO WHICH ANY LIABILITY HAS BEEN
DETERMINED TO EXIST. SOUND DEVICES AND END USER EXPRESSLY AGREE THAT THE PRICE FOR THE PRODUCTS WAS DETERMINED
IN CONSIDERATION OF THE LIMITATION ON LIABILITY AND DAMAGES SET FORTH HEREIN AND SUCH LIMITATION HAS BEEN SPECIFICALLY
BARGAINED FOR AND CONSTITUTES AN AGREED ALLOCATION OF RISK WHICH SHALL SURVIVE THE DETERMINATION OF ANY COURT OF
COMPETENT JURISDICTION THAT ANY REMEDY HEREIN FAILS OF ITS ESSENTIAL PURPOSE.
Trademarks
The “wave” logo is a registered trademark, and FileSafe, PowerSafe, and Wave Agent are trademarks of Sound Devices, LLC.
Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries. Windows is a registered trademark of Microsoft
Corporation in the United States and other countries.
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harm-
ful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Part 15.19 (a)(3)
14 15

www.sounddevices.com
Part # 6578.000