Southern Enterprises Kedzie Multilevel Desk HO730400TX User manual

Page |
1
PO#:13864
HO730400TX
Kedzie Multilevel Desk
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises, Inc.
Customer Service: 1-800-633-5096
[email protected]om
www.seidal.com

Page |
2
1) Quantity
of 1
Left Top Panel
2) Quantity
of 1
Centre Top Panel
3) Quantity
of 1
Right Top Panel
4) Quantity
of 1
Left Side Panel
5) Quantity
of 1
Right Side Panel
6)Quantity
of 1
Down Right Side Panel
7) Quantity
of 1
Left Middle Panel
8) Quantity
of 1
Right Middle Panel
9) Quantity
of 1
Left Bottom Panel
10) Quantity
of 1
Centre Bottom Panel
11) Quantity
of 1
Right Bottom Panel
12) Quantity
of 1
Right Shelf Panel
Kedzie Multilevel Desk
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is
missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the
pictures. Using the incorrect hardware will cause damage

Page |
3
13) Quantity
of 2
Small Drawer Front Panel
14) Quantity
of 1
Big Drawer Front Panel
15) Quantity
of 3
Drawer Left Side Panel
16) Quantity
of 3
Drawer Right Side Panel
17) Quantity
of 2
Small Drawer Back Panel
18) Quantity
of 1
Big Drawer Back Panel
19) Quantity
of 2
Small Drawer Bottom Panel
20) Quantity
of 1
Big Drawer Bottom Panel
21) Quantity
of 1
Drawer Bottom Panel
22) Quantity
of 1
Drawer Left Side Panel
23) Quantity
of 1
Drawer Right Side Panel
24) Quantity
of 1
Drawer Back Panel
25) Quantity
of 1
Centre Back Panel
26) Quantity
of 1
Left Back Panel
27) Quantity
of 1
Right Back Pane1-l

Page |
4
28) Quantity
of 1
Right Back Panel-2
29) Quantity
of 1
Metal Front Frame
30) Quantity
of 1
Metal Back Frame
31) Quantity
of 4
Top Stretcher
32) Quantity
of 2
Bottom Stretcher
A) Quantity
of 30
Cam Bolts
B) Quantity
of 30
Cam Locks
C) Quantity
of 36
Wood Dowels Dia. 5/16"x1-1/4"
D)Quantity
o f 24
Bolt Dia. 1/4x3/4” L
E)Quantity
o f 24
Spring Washer Dia.1/4”
F)Quantity
o f 24
Flat washer Dia.1/4” x3/4”
G) Quantity
of 1
Allen Wrench
H
) Quantity
of 54
Screw Dia. 1/8” x 5/8”L
I) Quantity
of 4
Knob

Page |
5
J) Quantity
of 4
Bolts
Dia. 5/32”x 1”L
K) Quantity
of 28
Screw
Dia. 5/32”x 1L
L) Quantity
of 4
Metal Nut
M)Quantity
o f 4
Bolt Dia. 1/4x1-1/2” L
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the
finish. Avoid rubbing or scratching the surface
with rough or abrasive objects.
For replacement parts or questions, please call
Customer Service at 1-800-633-5096.
Assembly Tool Required:
No.2 Phillips Screwdriver
(Not Included)

Page |
6
Figure 1
Start with finger to help align Cam Bolts.
Insert Cam Locks (B) into corresponding
holes on Centre Bottom Panel (10).
Screw Cam Bolts (A) into threaded holes
on Left / Right Middle Panel (7/8).
Attach Left / Right Middle Panel (7/8) to
Bottom Panel (10) by inserting Cam Bolts
(A) and Wood Dowel (C) into
corresponding holes until all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Figure 2
Start with finger to help align Cam Bolts.
Insert Cam Locks (B) into corresponding
holes on pre-assembled unit from figure 1.
Screw Cam Bolts (A) into threaded holes
on Centre Top Panel (2).
Attach Centre Top Panel (2) to
pre-assembled unit from figure 2 by
inserting Cam Bolts (A) and Wood Dowel
(C) into corresponding holes until all
panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Kedzie Multilevel Desk
Assembly Instructions
B
A
C10
C

Page |
7
Figure 3
Start with finger to help align Cam Bolts.
Insert Cam Locks (B) into corresponding
holes on Left Side Panel (4).
Screw Cam Bolts (A) into threaded holes
on Left Bottom Panel (9).
Attach Left Bottom Panel (9) to Left Side
Panel (4) by inserting Cam Bolts (A) and
Wood Dowel (C) into corresponding holes
until all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Figure 4
Start with finger to help align Cam Bolts.
Insert Cam Locks (B) into corresponding
holes on Right Side Panel (5) & Lower
Right Side Panel (6).
Screw Cam Bolts (A) into threaded holes
on Right Shelf Panel (12).
Attach Right Shelf Panel (12) to Right Side
Panel (5) & Down Right Side Panel (6) by
inserting Cam Bolts (A) and Wood Dowel
(C) into corresponding holes until all
panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
5
12
C

Page |
8
Figure 5
Start with finger to help align Cam Bolts.
Insert Cam Locks (B) into corresponding
holes on pre-assembled unit from figure 4.
Screw Cam Bolts (A) into threaded holes
on Right Bottom Panel (11).
Attach Right Bottom Panel (11) to
pre-assembled unit from figure 4 by
inserting Cam Bolts (A) and Wood Dowel
(C) into corresponding holes until all
panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Figure 6
Start with finger to help align Cam Bolts.
Insert Cam Locks (B) into corresponding
holes on pre-assembled unit from figure 5.
Screw Cam Bolts (A) into threaded holes
on pre-assembled unit from figure 2.
Attach pre-assembled unit from figure 2 to
pre-assembled unit from figure 5 by
inserting Cam Bolts (A) and Wood Dowel
(C) into corresponding holes until all
panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
11
11

Page |
9
Figure 7
Start with finger to help align Cam Bolts.
Insert Cam Locks (B) into corresponding
holes on pre-assembled unit from figure 3.
Screw Cam Bolts (A) into threaded holes
on pre-assembled unit from figure 6.
Attach pre-assembled unit from figure 3 to
pre-assembled unit from figure 6 by
inserting Cam Bolts (A) and Wood Dowel
(C) into corresponding holes until all
panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Figure 8
Start with finger to help align Cam Bolts.
Insert Cam Locks (B) into corresponding
holes on pre-assembled unit from figure 7.
Screw Cam Bolts (A) into threaded holes
on Top Panel (1/3).
Attach Top Panel (1/3) to pre-assembled
unit from figure 7 by inserting Cam Bolts
(A) and Wood Dowel (C) into
corresponding holes until all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
9
A
C
A
C

Page |
10
Figure 9
Attach Back Panels (25/26/27/28) to back
of the unit with Screws (H).
Tighten Screws (H) with Phillips
screwdriver .
Figure 10
Attach Drawer Side Panels (15/16) to
Drawer Back Panel (18) using Screws (K).
Insert Drawer Bottom Panel (20) into
grooves of Panels (15/16/18).
Attach Drawer Front Panel (14) to
assembled unit using Screws (K).
Attach Knobs (I) to Drawer Front Panel
(14) using Bolts (J).
Tighten Bolts and Screws with Phillips
screwdriver.
Repeat process for drawer
panel(15/16/17/19/13)
28
27
26
25
H