Southern Enterprises Dynasty BC403400TX User manual

For assistance with assembly contact:
Southern Enterprises, Inc.
Customer Service 1-800- 33-509
[e-mail]
www.seidal.com
BC403400TX
Dynasty Storage Bench
Assembly Instructions
PO#:1339
Page 1

Dynasty Storage Bench
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer
service if hardware is missing. Before beginning assembly, carefully study the diagrams below and
sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
A.
Quantity
of 1
Top Panel
B.
Quantity
of 1
Apron Back Panel
C.
Quantity
of 2
Apron Side Panel
D.
Quantity
of 1
Left Side Panel
E.
Quantity
of 1
Right Side Panel
F.
Quantity
of 1
Left Middle Panel
G.
Quantity
of 1
Right Middle Panel
H.
Quantity
of 1
Bottom Panel
I.
Quantity
of 1
Adjustable Shelf Panel
J.
Quantity
of 1
Back Panel
K.
Quantity
of 2
Drawer Front Panel
L.
Quantity
of 2
Drawer Left Side Panel
Page 2

M.
Quantity
of 2
Drawer Right Side Panel
N.
Quantity
of 2
Drawer Back Panel
O.
Quantity
of 2
Drawer
B
ottom
P
anel
P.
Quantity
of 1
Middle Leg
Q.
Quantity
of 1
Left Side Door
R.
Quantity
of 1
Right Side Door
S.
Quantity
of 1
Seat Cushion
1.
Quantity
of 4
Wood Dowel: Dia 8x30mm
2.
Quantity
of 7
Bolt: Dia 1/4”x25mm
3.
Quantity
of 32
Cam Lock: Dia 15x9mm
4.
Quantity
of 32
Cam Bolt: Dia 5x35mmL
5.
Quantity
of 2
Door Handle
6.
Quantity
of 4
Shelf Bracket
Page 3

7.
Quantity
of 4
Drawer Stopper:
Dia
1/4”x
23mm
8.
Quantity
of 26
Screw: Dia1/8”x1/2”L
9.
Quantity
of 8
Sticker Cover
10.
Quantity
of 2
Drawer Handle
11.
Quantity
of 2
Magnet
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Assembly Tool Required No.2 Phillips
Screwdriver (Not Included)
Page 4

Figure 1
Start by hand to help align bolts.
Use Wood Dowels (1) and Bolts (2) to
connect Apron Back Panel (B) to Apron
Side Panels (C).
Tighten Bolts (2) with Phillips
screwdriver as shown.
Figure 2
Start by hand to help align bolts.
Use Wood Dowels (1) and Bolts (2) to
connect assembled unit from Figure 1 to
Top Panel (A).
Tighten Bolts (2) with Phillips
screwdriver as shown.
Page 5
Page 4
Dynasty Storage Bench
Assembly Instructions
2
B
C
C
2
1
1

Figure 3
Start by hand to help align Cam Bolts.
Insert Cam Locks (3) into corresponding
holes on Drawer Back Panel (N).
Screw Cam Bolts (4) into holes on
Drawer Left Side Panel (L) and Drawer
Right Side Panel (M).
Attach Drawer Left Side Panel (L) and
Drawer Right Side Panel (M) to Drawer
Back Panel (N) by inserting Cam Bolts
(4) into corresponding holes until all
panels meet.
Tighten by rotating Cam Locks (3)
clockwise with Phillips Screwdriver.
Figure 4
Insert Drawer Bottom Panel (O) into the
grooves of the assembled drawer.
Page
N
3
3
4
4

Figure 5
Start by hand to help align Cam Bolts.
Insert Cam Locks (3) into corresponding
holes on assembled unit from Figure 4.
Screw Cam Bolts (4) into holes on
Drawer Front Panel (K).
Attach assembled unit from Figure 4 to
Drawer Front Panel (K) by inserting
Cam Bolts (4) into corresponding holes
until all panels meet.
Tighten by rotating Cam Locks (3)
clockwise with Phillips screwdriver.
Figure 6
Use Bolt to connect Handle (10) to
Drawer Front Panel.
Tighten Bolt (10) with Philip Screwdriver.
Cover Cam Lock holes with Sticker
Covers (9).
Repeat steps to assemble the second
drawer.
Page 7
K
3
4
4
4
4
3
9
9
1 0
1 0

Figure 7
Start by hand to help align Cam Bolts.
Insert Cam Locks (3) into corresponding
holes on Middle Panel (F) and (G).
Screw Cam Bolts (4) into holes on
Bottom Panel (H).
Attach Middle Panel (F) and (G) to
Bottom Panel (H) by inserting Cam Bolts
(4) into corresponding holes until all
panels meet.
Tighten by rotating Cam Locks (3)
clockwise with Phillips screwdriver.
Figure 8
Start by hand to help align Cam Bolts.
Insert Cam Locks (3) into holes on
assembled unit from Figure 7.
Screw Cam Bolts (4) into holes on Left
Side Panel (D) and Right Side Panel (E).
Attach Left Side Panel (D) to assembled
unit from Figure 7 by inserting Cam
Bolts (4) into corresponding holes until
all panels meet.
Tighten by rotating Cam Locks (5)
clockwise with Phillips screwdriver.
Page 8
3
3
4
4
4
4
3
34
4

Figure 9
Start by hand to help align Cam Bolts.
Insert Cam Locks (3) into corresponding
holes on assembled unit from Figure 8.
Screw Cam Bolts (4) into holes on the
underside of the Top Panel. Attach the
Top Panel to assembled unit from
Figure 8 by inserting Cam Bolts (4) into
corresponding holes until all panels
meet.
Tighten by rotating Cam Locks (3)
clockwise with Phillips screwdriver.
Figure 10
Attach Middle Leg (P) to assembled unit
from figure 9 as shown.
Turn clockwise by hand to tighten.
Page 9
4
4
4
4
4
3
3
3
3
P

Figure 11
Start by hand to help align screws.
Use Screws (8) to connect Back Panel
(J) to assembled unit from Figure 10 as
shown.
Tighten Screws (8) with Philips
screwdriver.
Figure 12
Screw Drawer Stoppers (7) into
corresponding holes on assembled unit.
Attach Drawers into assembled unit as
shown.
Page 10
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
7
7
7
7

Figure 13
Start by hand to help align screws.
Use Screws (11) to connect Magnetic
(11) into the pre-drilled holes on the
underside of Top Panel (A).
Figure 14
Insert Shelf Brackets (6) into
corresponding holes.
Insert Adjustable Shelf (I) in the arrows
direction.
Page 11
1 1 1 1 1 1
I
6

Figure 15
Use Bolt (5) to attach Door Handle (5) to
Left Side Door (Q).
Tighten Bolt (5) with Phillips screwdriver.
Repeat step for Right Side Door (R).
Figure 16
Start with finger to help align screws.
Use Screws (8) to connect Left Side
Door (Q) into holes of Left Middle Panel
(F) on assembled unit.
Repeat with Right Side Door (R).
Page 12
8
Q

Figure 17
Place Seat Cushion (S) on Top Panel as
shown.
Figure 18
Now your new Dynasty Storage Bench
is ready for use.
S
Page 13

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page 4
Page 14