Speco DVR-16TS Series User manual

DVR-4TN/8TN/16TN/16ST/16TT Series
SPECO TECHNOLOGIES 01/06
®
www.specotech.com
DVR-4TN
DVR-8TN
DVR-16TN
DVR-16TS
DVR-16TT
Triplex+ Digital Video Recorder Family
With Network/DDNS Video Server

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 1

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
2
Caution and Preventive Tips
•Take care not to drop the unit or subject the unit to major shocks or jolts.
•Do not place this unit on an unstable stand, bracket or mount.
•This unit is designed for indoor use only. Do not place the unit near water or in other
extremely humid conditions.
•This unit should not be placed in a built-in installation unless proper ventilation is provided.
•Please check the type of power source available before you plug and operate the unit.
•If the clearing is necessary, note to plug the unit from the outlet before uncovering the top
cover. Do not use liquid cleaners or aerosol cleaners. Use only a damp cloth for cleaning.
•Always power down the system prior to connecting and disconnecting accessories, with
the exception of USB devices.
•Lithium battery: Danger of explosion if battery is incorrectly replaced. Replace with
the same type of battery or equivalent type recommended by the battery manufacturer.
Dispose of used batteries according to the battery manufacturer’s instructions.
•Do not block the fan on the bottom of the unit – enough airflow is needed to protect
the unit from overheating.
This symbol intends to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the
appliance.
This symbol intends to alert the user to the presence of unprotected “Dangerous
Voltage” within the product’s enclosure that may be strong enough to cause a
risk of electric shock.

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 3
Important Information
Before proceeding, please read and observe all instructions and warnings in this manual.
Retain this manual with the original bill of sale for future reference and, if necessary, warranty
service. When unpacking your unit, check for missing or damaged items. If any item is missing, or if
damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your dealer for
assistance.
Rack Mounting
Consult with the supplier or manufacturer of your equipment rack for the proper procedure and
hardware for mounting this product in a safe fashion. Avoid uneven loading or mechanical instability
when rack-mounting units. Make sure the units are installed to get enough airflow for safe operation.
The maximum temperature for rack-mounted units is 104 °F/40 °C. Check product label for power
supply requirements to assure that no overloading of supply circuits or over current protection
occurs. Main grounding must be reliable and uncompromised by any connections.

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
4
Table of Contents
1. Overview .....................................................................................................................10
1.1 Product Key Features ........................................................................................11
1.2 Product Application Diagram..............................................................................12
2. System Setup..............................................................................................................12
2.1 Position the Unit.................................................................................................13
2.2 Selecting Video Format......................................................................................13
2.3 Connecting Devices to the Unit..........................................................................13
2.4 Rear Panel Connections....................................................................................14
3. General System Setup ...............................................................................................17
3.1 Front Panel Introduction ....................................................................................17
3.1.1 LED Definition ......................................................................................18
3.1.2 Functional Keys....................................................................................19
3.2 Install HDD to the Unit .......................................................................................22
3.3 Power Up / Down the Unit .................................................................................23
3.4 Entering OSD Setup Menu ................................................................................24
3.5 System Date / Time Setting ...............................................................................25
3.5.1 Set Date / Time.....................................................................................25
3.5.2 Daylight Saving Time............................................................................26
3.6 Record Schedule / Quality Setting .....................................................................27
3.6.1 Record Mode........................................................................................27
3.6.2 Schedule Setup ....................................................................................28
3.6.3 Preset Record Configuration ................................................................28
3.6.4 Per Camera Configuration....................................................................29
3.6.5 To Record Event Video Only ................................................................30
4. Basic Operation..........................................................................................................30
4.1 Viewing Live / Playback Video ...........................................................................30
4.1.1 Viewing Modes .....................................................................................30
4.1.2 Digital Zoom .........................................................................................31
4.1.3 Viewing Live Cameras..........................................................................31
To Freeze Live Image..............................................................................31
4.1.4 Viewing Recorded Video ......................................................................32
Key Usage in Playback ...........................................................................32
Pause Playback and Single Step Forward ..............................................33
Viewing Live Image in Playback Mode....................................................33
4.1.5 Dual Main Output (For DVR-16TT Only) ..............................................33
4.2 Sequence Setup ................................................................................................34

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 5
4.2.1 Sequence on Main Monitor.................................................................34
4.2.2 Call Monitor Control............................................................................34
4.3 Searching Recorded Video ................................................................................35
4.3.1 Searching by Time................................................................................36
4.3.2 Searching by Event ..............................................................................36
4.4 Video Export ......................................................................................................37
4.4.1 Export from OSD Setup Menu..............................................................37
4.4.1.1 Select the External Device......................................................38
4.4.1.2 Select Video for Exporting.......................................................39
4.4.1.3 Digital Signature......................................................................40
4.4.1.4 Erase Disc...............................................................................40
4.4.2 Quick Video Export through Front Panel ..............................................40
4.4.2.1 ezBurn Introduction.................................................................41
4.4.2.2 To Export Normal Video ..........................................................41
4.4.2.3 To Export Event Video.............................................................42
4.5 Deleting Recorded Video...................................................................................43
4.6 Dome Control.....................................................................................................44
4.6.1 Dome Connection.................................................................................44
4.6.2 Dome Protocol Setup ...........................................................................45
4.6.3 RS485 Setup........................................................................................45
4.6.4 Dome Controlling Key ..........................................................................46
4.6.5 Setting Preset Points............................................................................48
4.6.6 Calling Preset Points ............................................................................49
5. Advanced System Configuration..............................................................................49
Key Usage in OSD Menu...................................................................................50
Key Usage in Virtual Keyboard ..........................................................................50
5.1 System Setup ....................................................................................................51
5.1.1 Version .................................................................................................52
5.1.1.1 Model Name & Version ...........................................................52
5.1.1.2 Software Upgrade via Local Device ........................................52
5.1.1.3 Software Upgrade via Internet ................................................53
5.1.2 Language .............................................................................................53
5.1.3 Date / Time...........................................................................................54
5.1.3.1 Date / Time Setting .................................................................54
5.1.3.2 Date / Time Display.................................................................54
5.1.3.3 Date Display Mode..................................................................55
5.1.3.4 Time Display Mode .................................................................55
5.1.3.5 Date/Time Order .....................................................................55
5.1.3.6 Daylight Saving Time ..............................................................55
5.1.3.7 DST Start / End .......................................................................55

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
6
5.1.3.8 DST Bias.................................................................................56
5.1.4 Unit Name ............................................................................................56
5.1.5 Password .............................................................................................57
5.1.5.1 Admin / User Password(s) ......................................................57
5.1.5.2 Enable Password ....................................................................57
5.1.5.3 Load Factory Password ..........................................................58
5.1.6 Network Setup......................................................................................58
5.1.6.1 LAN Select ..............................................................................59
5.1.6.2 LAN Setup...............................................................................59
- DHCP......................................................................................59
- IP ............................................................................................60
- Netmask..................................................................................60
- Gateway..................................................................................60
- DNS ........................................................................................61
- PPPoE Account.......................................................................61
- PPPoE Password....................................................................62
- PPPoE Max Idle......................................................................62
-Connect At Booting .................................................................62
-Network Restart ......................................................................62
5.1.6.3 Dial-in Setup ...........................................................................62
- Dial-in Service.........................................................................63
- Dial-in Account ........................................................................63
- Dial-in Password .....................................................................64
- Server IP.................................................................................64
- Client IP ..................................................................................65
- Dial-in Idle Time ......................................................................65
- Dial-in Max Time .....................................................................65
5.1.6.4 Dial-out Setup .........................................................................65
- Dial-out DHCP ........................................................................66
- Dial-out IP ...............................................................................66
- Dial-out Netmask ....................................................................67
- Dial-out Gateway ....................................................................67
- Dial-out DNS ...........................................................................67
- Phone Number........................................................................67
- Dial-out Account......................................................................68
- Dial-out Password...................................................................68
- Dial-out Idle Time ....................................................................69
- Dial-out Max Time ...................................................................69
- Connect ..................................................................................69
5.1.6.5 Trigger Port .............................................................................69

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 7
5.1.6.6 Email Address .........................................................................69
5.1.6.7 SMTP Setup............................................................................70
- Email via SMTP ......................................................................70
- SMTP Server ..........................................................................71
- SMTP Port ..............................................................................71
- SMTP Account ........................................................................72
- SMTP Password .....................................................................72
5.1.6.8 DDNS Setup ...........................................................................72
- Enable DDNS..........................................................................73
- Host Name..............................................................................73
- DDNS Port ..............................................................................74
- Submit/Update ........................................................................74
5.1.7 RS485 Setup........................................................................................74
5.1.7.1 Unit ID.....................................................................................74
5.1.7.2 Baud Rate...............................................................................74
5.1.7.3 Bits..........................................................................................75
5.1.7.4 Stop.........................................................................................75
5.1.7.5 Parity.......................................................................................75
5.1.8 Audio Output ........................................................................................75
5.1.9 Key Beep..............................................................................................75
5.2 Monitor Setup ....................................................................................................76
5.2.1 Show Camera Title ...............................................................................76
5.2.2 Monitor Brightness..............................................................................76
5.2.3 Monitor Contrast...................................................................................76
5.2.4 Monitor Chrominance ...........................................................................76
5.2.5 Screen Center Adjust ...........................................................................77
5.2.6 Show Color Bar ....................................................................................77
5.2.7 VGA Resolution ....................................................................................77
5.3 Camera Setup....................................................................................................78
5.3.1 Camera Select......................................................................................78
5.3.2 Dome Protocol......................................................................................78
5.3.3 Dome ID ...............................................................................................78
5.3.4 Camera Title.........................................................................................79
5.3.5 Covert...................................................................................................79
5.3.6 Termination...........................................................................................80
5.3.7 Brightness ............................................................................................80
5.3.8 Contrast................................................................................................80
5.3.9 Saturation.............................................................................................80
5.3.10 Hue.......................................................................................................80
5.3.11 Audio Association .................................................................................81

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
8
5.4 Record Setup.....................................................................................................81
5.4.1 Record Mode........................................................................................82
5.4.2 Schedule Setup ....................................................................................82
5.4.2.1 Day / Night Time Start / End....................................................83
5.4.2.2 Weekend Schedule.................................................................83
5.4.2.3 Weekend Start / End ...............................................................83
5.4.3 Preset Record Configuration ................................................................83
5.4.4 Per Camera Configuration....................................................................84
5.4.4.1 Camera Select ........................................................................84
5.4.4.2 Normal PPS ............................................................................84
5.4.4.3 Normal Qlty.............................................................................84
5.4.4.4 Event Max PPS.......................................................................85
5.4.4.5 Event Qlty ...............................................................................85
5.4.4.6 Event Active ............................................................................85
5.4.5 ezRecord Setup....................................................................................85
5.4.6 Data Lifetime ........................................................................................86
5.4.7 Pre-Alarm Recording............................................................................87
5.4.8 Circular Recording................................................................................87
5.4.9 Audio Recording...................................................................................87
5.4.10 Purge Data ...........................................................................................88
5.4.10.1 Purge All Data .........................................................................88
5.4.10.2 Purge All Event Data...............................................................88
5.4.10.3 Purge Event Before.................................................................88
5.4.10.4 Start to Purge ..........................................................................88
5.5 Sequence Setup ................................................................................................89
5.5.1 Main / Call Monitor Dwell......................................................................89
5.5.2 Main / Call Monitor Schedule................................................................89
5.6 Event Setup .......................................................................................................90
5.6.1 Internal Buzzer .....................................................................................90
5.6.2 Event Icon ............................................................................................90
5.6.3 Email Notice .........................................................................................91
5.6.4 Event Full Screen .................................................................................91
5.6.5 Event Duration......................................................................................91
5.6.6 Per Channel Config ..............................................................................91
5.6.6.1 Channel Select........................................................................92
5.6.6.2 Video Loss Detect...................................................................92
5.6.6.3 Motion Detect..........................................................................92
5.6.6.4 Detection Config .....................................................................92
- Detected Area Setup...............................................................93
- Sensitivity................................................................................93

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 9
- Area Threshold .......................................................................93
- Detected Area Percentage ......................................................93
5.6.6.5 Alarm In ..................................................................................94
5.6.6.6 Alarm Out................................................................................94
5.7 Database Setup .................................................................................................94
5.7.1 Total / Free Size of HDD.......................................................................95
5.7.2 Avail. REC Time ...................................................................................95
5.7.3 Internal / External Disks .......................................................................95
5.8 Configuration .....................................................................................................96
5.8.1 Load Factory Default ............................................................................96
5.8.2 Import Configuration.............................................................................96
5.8.3 Export Configuration.............................................................................97
5.8.3.1 Copy Destination.....................................................................97
5.8.3.2 Configuration Name ................................................................97
5.8.3.3 Begin Export ...........................................................................98
5.9 Video Export ......................................................................................................98
5.9.1 Select Device .......................................................................................99
5.9.2 Select Channel .....................................................................................99
5.9.3 From / To Time ...................................................................................100
5.9.4 Select Events .....................................................................................100
5.9.5 Data Type ...........................................................................................100
5.9.6 Digital Signature .................................................................................101
5.9.7 Erase Disc..........................................................................................101
5.9.8 Begin Export.......................................................................................101
5.10 Shutdown.........................................................................................................101
Appendix A: Technical Specifications .........................................................................103
Appendix B: Record Configuration..............................................................................105
Appendix C: Record Duration.......................................................................................109
Appendix D: Dial-up Connections via Modem ............................................................112
Establishing Dial-in Connection ................................................................................ 112
Establishing Dial-out Connection .............................................................................. 116
Appendix E: Verifying Digital Signature ......................................................................122
Appendix F: Alarm I/O Pin Definition ...........................................................................125
Appendix G: Hard Disk Installation..............................................................................127
Appendix H: HDD PC Player Tool Introduction...........................................................131
Using EXT2IFS on Your PC......................................................................................131
Start Playing the *.drv file..........................................................................................133
Appendix I: IR Remote...................................................................................................135
Appendix J: ezRecord Diagram Sample......................................................................136

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
10
1. Overview
The DVR-4TN/8TN/16TN/16TS/16TT series unit is an integrated digital video
recorder that combines the features of a time-lapse audio / video recorder, a
multiplexer, and a video server to create a single security CCTV solution.
Its outstanding triplex+ operation enables users to view live or playback
recorded video, have remote access through network simultaneously while
recording other video, and to view previously recorded video instantly by
entering the time and date or selecting recorded video from the event list.
The total number of PPS (Pictures per Second) makes the main difference
among these models, shown as below table:
DVR-4TN/8TN/16TN DVR-16TS DVR-16TT
NTSC 120 pps 240 pps 480 pps
PAL 100 pps 200 pps 400 pps
The DVR-4TN/8TN/16TN/16TS/16TT series includes SpecoRemoteTM, the
remote viewing and configuration software that is a Web-browser plug-in,
which allows the user to view live, or recorded video images, and enables
remote configuration. The remote software is stored in the
DVR-4TN/8TN/16TN/16TS/16TT series unit and deployed over a LAN, WAN
or Internet connection to remote Windows-based computers. This simplifies
the installation and maintenance of the software components so all remote
users are kept up to date.
DVR-4TN
DVR-8TN

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 11
DVR-16TN/16TS/16TT
1.1 Product Key Features
The DVR-4TN/8TN/16TN/16TS/16TT series offers advanced features not
typically found in standard multiplexers; it integrates the full features of a DVR,
multiplexer and video server (by using the software SpecoRemoteTM). The
key features of the DVR-4TN/8TN/16TN/16TS/16TT series are listed as
follows.
•MPEG-4 high quality compression
•16 channels for video input
•Triplex+ operation enabling simultaneous viewing live or playback while
continuing to record
•SpecoRemoteTM web-based software for remote monitoring and control
via LAN or Internet
•Embedded Linux operating system
•Real-time “live display” for each channel
•Recording frame rate up to 480 pps(NTSC)/ 400 pps(PAL)
•2 Channels of audio recording/ playback
•Three USB2.0 ports for video clip export and/or backup
•Easy software upgrade via USB ThumbDrive®, CD/RW or Internet Remote
Application
•Up to 4 internal hard drives support up to 1TB capacity
•IEEE 1394 for external storage
•2X Digital Zoom available in both live and playback mode
•Export video (AVI) with audio and digital Signature
•Exported AVI file can be played in any PC with DIVX decoder installed
•Automatic camera detection (Plug & Play)
•Covert camera operation provides enhanced security and administrator
control
•Per camera configuration for camera settings, frame rate, picture bit rate,
alarms, motion detection.
•Programmable day/ night/ weekend scheduling
•Programmable main monitor/ call-monitor switching sequence

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
12
•Powerful alarm processor allows flexible alarm trigger and responses,
including alarm, motion, and camera failure
•Dome control protocols: Speco, Pelco D, Pelco P, Fastrax 2 and AD422
•Two levels of password security
1.2 Product Application Diagram
Connect the unit with other devices as shown in the system diagram below to
complete a video surveillance solution. The figure also displays the
expandability and flexibility of this digital recording system.
2. System Setup
Priority notices and an introduction on system installation will be described in
this chapter. Please follow the instructions to operate the unit.
In order to prevent the unit from data loss and system damage that can be
caused by a sudden power fluctuation, use of an Uninterruptible Power
Supply (UPS) is highly recommended.

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 13
2.1 Position the Unit
Position / mount the DVR-4TN/8TN/16TN/16TS/16TT series unit in an
appropriate, steady location and make sure the power is off before making
any connections. The area should avoid hindering or blocking the unit from
airflow. Enough airflow is needed to protect the unit from overheating.
The maximum allowable temperature of operating environment is
104°F/40°C.
The unit utilizes heat-conducting techniques to transfer internal heat to the
case, especially to the bottom side of the unit.
NOTE: Be sure not to remove the rubber feet, and always leave a
space for air ventilation on the unit’s bottom side.
2.2 Selecting Video Format
The DVR-4TN/ DVR-8TN/ DVR-16TN series unit is designed to operate under
either NTSC or PAL video formats. Please contact a qualified service person
to perform the installation procedure.
2.3 Connecting Devices to the Unit
This section lists some important notices that should be read before
making any connections to the DVR-4TN/8TN/16TN/16TS/16TT series unit.
NOTE: Connect short-term external devices, such as USB
ThumbDrive®, USB CD-RW, USB Hard Disk Drive, etc., only after the
unit is successfully powered up.
Connecting Required Devices
Before powering up, you should connect cameras and a main monitor to the
unit for basic operation. If needed, connect a call monitor for displaying full
screen video of all installed cameras in sequence.

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
14
Connecting Short-term Device
If you plan to install any short-term external devices, such as USB CD-RW,
USB Hard Disk Drive, etc, to the DVR-4TN/8TN/16TN/16TS/16TT series and
want to use them as part of the unit system. Make sure those devices are
connected only after the DVR-4TN/8TN/16TN/16TS/16TT is powered up.
The DVR-4TN/8TN/16TN/16TS/16TT series unit can only recognize the
external devices after the power-up process is completed.
2.4 Rear Panel Connections
There are several connectors on the rear panel of the
DVR-4TN/8TN/16TN/16TS/16TT series units available for installations. The
following figure shows the connectors by name and a detailed description of
each connector follows.
There is one difference between the rear panel of different models;
DVR-4TN/8TN/16TN has an IEEE 1394 connector and DVR-16TS/TT has a
1000M LAN Port instead, shown as below figures.
Rear Panel of DVR-4TN/8TN/16TN:

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 15
Rear panel of DVR-16TS/16-TT:
Main Monitor (S-Video/ BNC/ VGA)
S-Video, BNC and VGA output connectors are available for connecting to a
main monitor. The main monitor displays live image and playback recorded
video in full-screen or multiple window format.
RS-232C
The unit provides a RS-232C communication port for sending and receiving
signals.
Alarm I/O & RS485 Port
The unit provides an Alarm I/O and RS485 port that offers user the flexibility
required to connect the unit to another device.
Refer to Appendix F: Alarm I/O Pin Definition for detailed pin information on
the Alarm I/O for the DVR-4TN/8TN/16TN/16TS/16TT.
IEEE1394 (for DVR-4TN/8Tn/16TN only)
DVR-4TN/ DVR-8TN/ DVR-16TN series unit is equipped with two IEEE1394
(FireWire®) ports for extended connections.
LAN 1000M (for DVR-16TS/16-TT only)
This port is for DVR-16TS/16-TT to connect to a NAS device.

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
16
Audio In / Out
The DVR-4TN/8TN/16TN/16TS/16TT series unit provides two channels of
audio recording and playback. The Audio In RCA connector is offered for
connecting an audio source device (e.g. external amplified microphone) to the
unit. The Audio Out RCA connector is available for connecting an audio output
device (e.g. amplified speakers) to the unit.
USB 2.0 (x3)
There are two USB2.0 ports on the rear panel and one on the front panel to
allow users to connect external USB devices to the unit, such as a
ThumbDrive®.
The DVR-4TN/8TN/16TN/16TS/16TT allows the user to preset the OSD
settings using a USB mouse.
LAN (RJ-45)
The DVR-4TN/8TN/16TN/16TS/16TT series is capable of networking. The
LAN port allows the DVR-4TN/8TN/16TN/16TS/16TT series to access the
network/Internet through an Ethernet connection.
Power Supply
The DVR-4TN/8TN/16TN/16TS/16TT series includes an AC power
connection jack. Please use the power supply that ships with the unit.
WARNING: Use of a different power supply may cause overloading.
NOTE: Use of other power supply may cause overloading.
Power Switch
Used to power up and shut down the unit.
Call Monitor (BNC)
The call monitor is used to display full screen video of all installed cameras in
sequence. The BNC call monitor connector allows the user to connect an
optional call monitor to the DVR-4TN/8TN/16TN/16TS/16TT series unit.
Video Input
A group of BNC connectors are available for video input streams from
installed cameras. The number of connectors is equal to the number of
channels; the DVR-4TN/8TN/16TN/16TS/16TT units have 4/ 8/ 16 BNC
connectors on the rear panel, respectively.

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 17
Camera Looping
Groups of BNC connectors are positioned on the rear panel for looping out
video input.
3. General System Setup
The DVR-4TN/8TN/16TN/16TS/16TT series DVR allows the user to easily
access some general operations through the front panel. The following
subsections introduce general operation of the unit.
The regularly displayed OSD information and its positions are shown in the
following figure. The channel title is displayed on the top-left side of the
window, either in full screen mode or in multiple channel mode. The current
operating mode, including Call mode, Dome-Control mode, Playback mode.
Freeze mode and Sequence mode, is displayed on the bottom-left side of the
screen. The date/ time information is displayed on the bottom-right side.
Ch4
Playback
2005/11/09 PM04:31:22
3.1 Front Panel Introduction
The unit’s front panel controls enable the user to control the unit and preset
programmable functions.

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
18
3.1.1 LED Definition
The DVR-4TN/8TN/16TN/16TS/16TT series LEDs on the front panel are
described as follows.
Power LED (Green)
The LED should be lit when the power is connected.
HDD LED (Yellow)
The LED will be lit while the HDD is processing data to or from the connected
HDD(s).
Alarm LED (Red)
The LED should be lit when an alarm is triggered.
Network LED (Green)
The LED should be lit when the DVR-4TN/8TN/16TN/16TS/16TT series unit is
connected to a network and blink when any data is being transferred.
REC LED (Green)
The LED should blink while the DVR-4TN/8TN/16TN/16TS/16TT series unit is
recording.

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 19
3.1.2 Functional Keys
The DVR-4TN/8TN/16TN/16TS/16TT series unit function keys on the front
panel are described below for normal operation.
COPY
Used to quick export video to an external device, including USB CD-RW and
ThumbDrive®, etc. For more detailed operation instructions refer to Section
4.7.1 To Export Video..
CALL
Press to enter call monitor control mode; press ESC to exit.
Direction Keys
•In Zoom mode, these keys function as Direction keys.
•In the OSD setup menu, the Direction keys are used to move the cursor to
previous or next fields. To change the value in the selected field, press UP
/ DOWN keys.
DOME
Press this key to enter dome control mode. Please refer to Section 4.6 Dome
Control for more details about controlling operation.
ESC
Press to cancel or exit from certain mode or OSD menu without changing the
settings made previously.