Sport-thieme 115 8032 Manual

Operating/assembly instructions
Beach volleyball posts
Prod. code 115 8032; 115 8061; 115 8087; 115 8090
Sport-Thieme GmbH
38367 Grasleben / Germany
Telephone: [phone]
Fax: [phone]
Page 1of 3
02/2016
Operating/assembly instructions for beach volleyball posts
Thank you very much for choosing a Sport-Thieme product.
We want to make sure that you can enjoy this product, so here is some important
advice for your safety as well as for the use and maintenance of the equipment.
Please read these instructions fully before you assemble and use the equipment:
Illustration 1: Beach volleyball posts
with ground sockets
1. General
The beach volleyball posts (product code 115 8032) are intended for setting the posts
directly into the foundations using concrete or for use with a ground socket (151
5611).
The beach volleyball posts (product code 115 8061) are intended for use in ground
sockets. The ground sockets are included.
The posts have a diameter of 83 mm and each come with two comb-shaped bars.
The height of the net can be adjusted in increments using these bars by positioning
the snap hook at the required height when the net line is slack and then tightening
the net again.
The playing height for men (2.43 m) and for women (2.24 m) as well as many heights
in-between can be set without detaching the net.
The adjustment range is approx. 50 cm.
All materials are either hot-dip galvanised or stainless steel and therefore
weatherproof.

Operating/assembly instructions
Beach volleyball posts
Prod. code 115 8032; 115 8061; 115 8087; 115 8090
Sport-Thieme GmbH
38367 Grasleben / Germany
Telephone: [phone]
Fax: [phone]
Page 2of 3
02/2016
Included with product code 115 8061 are the covers for the ground sockets.
2. Operating and assembly instructions
The ground sockets for product code 115 8061 are set into the foundations using
concrete. The foundations should be laid to the measurements in illustration 2.
The foundations require a load-bearing ground underneath. Consider the setting time
before erecting the posts.
For product code 115 8032, the post is directly and firmly set into the foundation using
concrete. The ground sockets are inserted to a depth of approx. 35 cm. The
foundation for the socket should be approx. 80x80x80 cm in natural ground and
approx. 100x100x100 cm in backfilled, light ground.
Once you have set the beach volleyball posts (product code 115 8032) into the
foundations or inserted the beach volleyball posts (product code 115 8061) into the
sockets, you can attach the net to the eyelets. See product number 117 8324 for a
matching beach volleyball net from our range.
After the game, the volleyball posts (product code 115 8061) can be easily removed
by pulling them out of the sockets.
Close the sockets with the respective covers once the posts have been removed.
The covers are intended to protect the sockets from any dirt.
Net attachment see ill. 3.
Ensure that there is no dirt in the ground sockets!
Illustration 2: Foundation (without and with ground socket)
post!
post!
playing!surface!
playing!surface!
foundation!
foundation!
ground!socket!

Operating/assembly instructions
Beach volleyball posts
Prod. code 115 8032; 115 8061; 115 8087; 115 8090
Sport-Thieme GmbH
38367 Grasleben / Germany
Telephone: [phone]
Fax: [phone]
Page 3of 3
02/2016
Illustration 3: Net attachment
Caution: Do not overload or climb the equipment!
Maintenance and care instructions
Instructions: Carry out a visual check at regular intervals. Due to our
continuous quality control of the products, technical changes
may occur which may lead to slight deviations in the
instructions.
Check at regular intervals that the screw connections are tight.
Check the equipment for possible damage and replace worn-out
parts. Ensure the perfect condition of the ground socket.
We are happy to answer any questions
you may have.
Your Sport-Thieme Team