SPORTS AFIELD SA-HD1X User manual

QUICK ACCESS SECURITY VAULT
INSTRUCTION MANUAL FOR SA-HD1X
072921

TABLE OF CONTENTS
www.saproducts.com 1
IMPORTANT INFORMATION .......................................................................................... 2
1. REGISTRATION ........................................................................................................... 3
2. UNDERSTANDING YOUR VAULT ................................................................................. 4
3. INITIAL ENTRY................................................................................................................. 5
4. BATTERY INSTALLATION................................................................................................. 5
5. ELECTRONIC LOCK SECURITY CODE SETUP ......................................................................6
6. LOW BATTERY WARNING ...........................................................................................7
7. SILENT ENTRY MODE ....................................................................................................... 7
8. PROPER PLACEMENT AND MOVING OF VAULT ........................................................ 7
9. LOCKED OUT OF YOUR VAULT .................................................................................. 8
10. LOCK OUT MODE / TAMPER PROTECTION..................................................................... 8
11. SECURING YOUR VAULT ................................................................................................ 9
12. LOADING YOUR VAULT .................................................................................................10
13. MAINTAINING HINGES AND INTERNAL MECHANISMS ................................................10
WARRANTY ....................................................................................................................... 11

2
DISCLAIMER - READ BEFORE VAULT SETUP
WEAPON STORAGE
SAFETY
Thank you for choosing a Sports Afield vault to protect your valuables. We are
commied to securing, organizing and protecng your most important documents,
valuables and keepsakes.
If you experience problems or challenges with your vault, please contact us.
Many issues can be quickly resolved without the product being returned.
Be sure to keep backup keys stored in a safe place away from unauthorized users
Do not put anything in your vault that will put pressure against the door when it is
closed
If you choose to ulize this vault to store a firearm always follow proper firearm and
local laws when storing a firearm.
SA Consumer Products strongly recommends that you do not store loaded firearms.
Always follow the firearm safety rules set out by the firearm’s manufacturer.
A Sports Afield vault or any other firearm storage device cannot take the place
of other safety procedures including advising children of the dangers of firearms.
SA Consumer Products and its distributors of the Sports Afield vaults do not
recommend, suggest, advise, promote, or otherwise condone the ownership or use
of firearms. We believe the decision to own or use a firearm is a serious decision
that should only be made by an adult who has carefully considered the risks and
benefits of such a decision.
PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR
SPORTS AFIELD VAULT.
DO NOT LOCK THIS MANUAL OR THE BACK UP ACCESS KEYS IN YOUR VAULT.
Contact Customer Service at [email protected] or [phone]

REGISTRATION INFORMATION
Theinformaon you record onto this page will be required in the event you cannot
access thecontents of your Sports Afield Vault. Pleasefill out all therequired
informaon below and retain for your records and safe keeping.
PLEASE HAVE THIS INFORMATION READY PRIOR TO CALLING FOR TECHNICAL
ASSISTANCE AT:
PURCHASE DATE:
PURCHASE PRICE (BEFORE TAX):
MODEL NUMBER:
SERIAL NUMBER:
KEY NUMBER (IF APPLICABLE):
1. REGISTRATION
3
RETAILER NAME:
Contact Customer Service at [phone] or [email protected]
Contact Customer Service at [email protected] or [phone]
Register your vault at www.saproducts.com
By registering your Sports Afield vault we will be able to expedite and address
any problems or challenges you may have which would otherwiserequirea
notary leer and proof of payment.

4
2. UNDERSTANDING YOUR VAULT
KEY ENTRY
ELECTRONIC
TOUCH PAD
BATTERY
COMPARTMENT
RESET BUTTON
(INSIDE BATTERY
COMPARTMENT
SECURITY
CABLE

5
4. BATTERY INSTALLATION
Step 1
2. Remove protecve film
on keypad.
1.
WARNING: Thebaeries must be inserted with the correct polarity. Exhausted baeries
must beremoved from theproduct and discarded safely. Do not use rechargeable
(nickel – cadmium) baeries.
Locate the baery cover on
the interior vault lock housing.
Remove the cover with the
screwdriver (included). Insert
the 4 AAA baeries in the proper
orientaon. The touch pad will
beep when the baeries are
successfully installed.
2. The spring loaded lid will
open upwards automacally,
but does not open to a fully
accessible posion.
Step 2
1.
Step 1
Locate the back up key on the
front surface of the vault.
Insert the back up key and
turn it counter-clockwise to
open your vault.
Step 2
Battery
Compartment
Screw
(remove for entry)
3. INITIAL ENTRY
AUTOMATIC OPEN
MANUAL OPEN

6
5. ELECTRONIC LOCK SECURITY CODE SETUP
4. With keys in hand, test
that your new code was
successfully recorded.
Door will automacally
open upon succesfully
entering a security code.
3.
2.
1.
Step 1Step 2Step 3
Inside of the baery
compartment you will find a
reset buon. Press and release
the reset buon. You will hear
two beeps and the green light
will flash two mes.
You are now in programming
mode.
Input your 3-8 digit code.
Once complete, push the reset
buon to lock in your new
code.
Battery
Compartment
Reset
Button
Screw
(remove for entry)
Once set up is complete,
replace baery cover.
Step 4

7
This E-Lock is equipped to alert you
when thebaeries are low by illuminang
the red light (center) on the touch pad.
Always test the baeries when installing
or replacing. If the red light comes on
when a number is pressed you know the
baeries are not fully charged.
6. LOW BATTERY WARNING
7. SILENT ENTRY MODE
By acvang theE-lock quiet mode, the
safe will no longer make audible sound
when interacng with the vault, allowing
for silent access.
On the keypad, hold the number for
three seconds to acvate the mute
funcon. The sound can be re-acvated
by again holding the number one key for
three seconds.
Red = Low Baery
1. To maximize burglary protecon and stability,securing the vault to thefloor or
wall is recommended.
2.
3. Always ensurethevault is in an isolated and dry area. Never place the vault in
direct contact with a wet floor. When installing your vault on a concrete floor,
useof a moisture/protecve barrier is highly recommended. Failureto do so,
or exposing the vault to chemicals or other adverse environments may void
the warranty.
SA Consumer Products recommends that you storeyour vault in a closet,office,
basement,bedroom or any other locaon that is convenient for you but out of
direct line of sight from prying eyes.
8. PROPER PLACEMENT AND MOVING OF VAULT
1

9. LOCKED OUT OF YOUR VAULT
In the event you have forgoen thesecurity codeyour will need to use your backup
keys to gain access to your vault. Follow setup code instrucons.
If you have lost your backup keys, you will need to contact customer service at the
number below. Proof of purchase is required to obtain keys.
8
Contact Customer Service at [email protected] or [phone]
10. LOCKOUT MODE/ TAMPER PROTECTION
1. Three consecuve incorrect code entries will
put the vault in “Basic Lockout” mode. Touch
pad is deacvated for 30 seconds.
2. Aer “Basic Lockout” mode has ended, another
three consecuve incorrect code entries will result
in “Severe Lockout” mode. Touch pad is deacvated
for 5-minutes.

9
11. SECURING YOUR VAULT
Use the recommended hardware or consult your hardware retailer for fastening
hardware for your parcular mounng surface.
Open the vault door to provide access to the factory drilled bolt down holes that
are located under the protecve foam liner.
To secure your vault to the floor, it will first be necessary to mark and drill pilot
holes in the floor surface.
Drill the appropriate diameter and depth of pilot holes based on the type of
hardware being used and the type of floor surface. When mounng on concrete we
recommend using a hammer drill and a concrete drill bit to drill the two
corresponding holes in the mounng surface.
Secure the vault by threading anchor bolts through the factory drilled bolt down
holes in the vault and screw down ght with a ratchet wrench.
TOOLS AND HARDWARE NEEDED TO SECURE
VAULT TO A WOOD OR CONCRETE SURFACE:
WASHERS
PADS
LAG BOLTS
ANCHORS
• DRILL
• 3/8�DRILL BIT
( FOR DRILLING ANCHOR HOLE )
or 3/16�(FOR INSTALL W/ OUT ANCHOR)
• SOCKET WRENCH TO MATCH
BOLT HEAD SIZE
• 2 STEEL LAG BOLTS (NOT INCLUDED) - SIZE 1/4" X 1.50" TO 2.0" LONG
• 2 STEEL WASHERS (NOT INCLUDED) - 1/4"
• 2 PLASTIC ANCHORS (NOT INCLUDED)- SIZE #10-12 X 1.5" TO 1.75" LONG
(FOR CONCRETE INSTALLATION)
• 4 PADS (INCLUDED)
BOLT
WASHER
VAULT
FLOOR
MOUNTING
SURFACE
ANCHOR
FOR CONCRETE
INSTALLATION

1.
2.
SECURING YOUR VAULT WITH PROVIDED CABLE
A security cable is included with
your vault. To secure the cable
around a fixed object, first loop
the cable around the object. Next,
thread one looped end through
the second loop as shown in the
figure to the right.
Place the cable’s free loop into the
notch on the side of the vault while
sll opened. Locking the vault with
the cable loop inside will secure the
cable inside the vault. Check the
loop to ensure their is no way it
can be manipulated to be easily
removed from the fixed object,
before leaving unaended.
13. MAINTAINING HINGES AND INTERNAL MECHANISMS
The hinges and internal locking mechanism are permanently lubricated, thus
needing no maintenance. Opening the door panel of your vault may void your
warranty. Always consult our customer service experts prior to doing so.
12. LOADING YOUR VAULT
1.
2.
Store ammunion separately from valuables.
Do not put anything in your vault that will put pressure against the door when
it is closed.
10
11. SECURING YOUR VAULT CONTINUED
Step 1Step 2

11
SA Consumer Products will repair or replace, at their sole discreon,
any Sports Afield vault damaged by fire, forced entry, forced aack
or natural flood for the lifeme of the original owner.
SA Consumer Products will repair or replace, at their sole discreon,
any Sports Afield vault with defecve parts, paint or lock for three
years of the original owner purchase date.
If SA Consumer Products deems a replacement vault is to be sent,
they will pay the freight costs to ship the replacement vault to the
original owner.
This three year warranty is limited to the vault and expressly
excludes any loss associated with the contents of the vault.
SA Consumer Products
reserves the right to receive full evidence
of your misfortune, such as a police report and/or homeowner’s
statement of coverage. This warranty is not valid outside of the
United States and Canada.
Proof of registraon and copy of sales receipt must be on file at
the me of claim. Visit our website at www.saproducts.com to
register your vault.
Three year warranty only applies to the original owner of the vault.
SA Consumer Products shall only be responsible and liable when the
vault is used in compliance with the direcons specified in your new
SA Consumer Products owner’s manual.
SA Consumer Products
requires that specific guidelines be
followed for repair. The vault will be repaired in-home if possible
(to include parts and labor); however, if factory replacement
is necessary (at
SA Consumer Products ’ sole discreon), the
replacement will be shipped freight prepaid, curbside delivery.
This warranty is inclusive and is in lieu of any and all other
warranes, express or implied. Specifically excluded are the
warranes of merchantability and fitness for a parcular purpose.
This warranty is limited to the vault itself and/or its value and
does not include consequenal damages of any kind including,
but not limited to, the contents in and of the vault.