SPORTS AFIELD SA-HD6-MEL User manual

IMPORTANT:
Please read this information and follow all safety rules carefully before
operating your security vault. Failure to do so will void your warranty.
050522
QUICK ACCESS BIOMETRIC SECURITY VAULT
INSTRUCTION MANUAL FOR SA-HD6-MEL

TABLE OF CONTENTS
www.saproducts.com 1
IMPORTANT INFORMATION ............................................................................................... 2
1. REGISTRATION ................................................................................................................ 3
2. UNDERSTANDING YOUR VAULT ...................................................................................... 4
3. INITIAL ENTRY .................................................................................................................. 5
4. BATTERY INSTALLATION................................................................................................... 5
5. SECURITY CODE SETUP....................... ............................................................................. 6
6. LOW BATTERY WARNING................................................................................................. 7
7. SILENT ENTRY MODE........................................................................................................ 7
8. LOCKED OUT OF YOUR VAULT....................................................................................... 8
9. LOCKOUT MODE / TAMPER PROTECTION.................................................................... 8
10. PROPER PLACEMENT AND MOVING OF VAULT............................................................ 9
11. SECURING YOUR VAULT............................................................................................... 9
12. LOADING YOUR VAULT .................................................................................................11
13. MAINTAINING HINGES AND INTERNAL MECHANISMS .............................................. 11
WARRANTY........................................................................................................................ 12

2
DISCLAIMER - READ BEFORE VAULT SETUP
WEAPON STORAGE
SAFETY
Thank you for choosing a Sports Afield vault to protect your valuables. We are
commied to securing, organizing and protecng your most important documents,
valuables and keepsakes.
If you experience problems or challenges with your vault, please contact us.
Many issues can be quickly resolved without the product being returned.
Be sure to keep backup keys stored in a safe place away from unauthorized users
Do not put anything in your vault that will put pressure against the door when
it is closed.
If you choose to ulize this vault to store a weapon always follow proper weapon and
local laws.
SA Consumer Products strongly recommends that you do not store loaded guns.
Always follow the firearm safety rules set out by the firearm’s manufacturer.
Store ammunion separately from valuables.
A Sports Afield vault or any other firearm storage device cannot take the place
of other safety procedures including advising children of the dangers of firearms.
SA Consumer Products and its distributors of the Sports Afield vaults do not
recommend, suggest, advise, promote, or otherwise condone the ownership or use of
firearms. We believe the decision to own or use a firearm is a serious decision that
should only be made by an adult who has carefully considered
the risks and benefits of such a decision.
PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR
SPORTS AFIELD VAULT.
DO NOT LOCK THIS MANUAL OR THE OVERRIDE ACCESS KEYS IN YOUR VAULT.
Contact Customer Service at [email protected] or [phone]

3
Register your vault at www.saproducts.com
PURCHASE DATE:
PURCHASE PRICE (BEFORE TAX):
MODEL NUMBER:
SERIAL NUMBER:
KEY NUMBER (IF APPLICABLE):
1. REGISTRATION
RETAILER NAME:
By registering your Sports Afield vault we will be able to expedite and address
any problems or challenges you may havewhich would otherwiserequirea
notary leer and proof of payment.
Theinformaon you record onto this page will be required in the event you
cannot access thecontents of your Sports Afield vault. Pleasefill out all the
required informaon below and retain for your records and safe keeping.
PLEASE HAVE THIS INFORMATION READY PRIOR TO CALLING FOR TECHNICAL
ASSISTANCE AT:
Contact Customer Service at [email protected] or [phone]
REGISTRATION INFORMATION

2. UNDERSTANDING YOUR VAULT
4
INTERIOR OF FRONT PANEL
Battery
Compartment
(4) AA Reset Button
LED Light
Electronic
Touch Pad
Key Override Entry
(Underneath
Key Cover)
Battery
Compartment
(inside)
Reset Button
(inside)
LED Light
(inside)
Security Cable Port
(on back panel)
Locking
Latch
12.60"
3.7"
10.60"

3. INITIAL ENTRY
5
1.
WARNING: Thebaeries must be inserted with the correct polarity. Exhausted baeries
must be removed from theproduct and discarded safely. Do not mix old and new
baeries. Do not mix alkalineor standard (carbon – zinc) baeries. Do not use
rechargeable (nickel – cadmium) baeries.
Locate the (4) AA baeries
and insert in the baery
compartment on the inside
front le of the vault. Keypad
will beep once when baeries
are successfully installed.
Replace baery cover.
4. BATTERY INSTALLATION
Step 2
2.
1. Locate the key cover and
press down near the right side
of the SPORTS AFIELD logo.
The cover will pop up on one
side so that it can be
removed.
Locate the override key
aached to the product
packaging.
Insert the key, Turn and hold
the key clockwise, and your
vault door will open.
Step 1
LOCK UNDER
KEY COVER

6
Important: It is necessary to re-program your vault with a new security code you
have personally selected to provide maximum household security. Be careful,
in choosing your new security code, you’ll want to be sure that you can operate
the unit quickly without making an error. Default code is set at 1234. Please make
sure your code is different than the default code.
5. SECURITY CODE SETUP
1.
Step 1
Push the reset buon, you will
hear a beep and the numbers will
flash. Input your 4-6 digit code.
Once complete push the reset
buon to lock in your new code.
You will hear two beeps.
2.
With key in hand, close the door.
Enter your 4-6 digit code, if code
is accepted, vault will open.
Battery
Compartment
(4) AA
Reset Button
LED Light
Step 2

7
6. LOW BATTERY WARNING
Low Baery
This E-Lock is equipped to alert you when the baeries are low by illuminang
the red light (center) on the touch pad.
Always test the baeries when installing or replacing. If the red light comes on
when a number is pressed you know the baeries are not fully charged.
7. SILENT ENTRY MODE
By acvang theE-lock silent entry mode,
the safe will no longer make audible sound
when interacng with the vault, allowing
for silent access.
On the keypad, hold the number for
three seconds to acvate the mute
funcon. The keypad will flash twice.
*The sound can be re-acvated
by again holding the number one key for
three seconds.
1

8
8. LOCKED OUT OF YOUR VAULT
In the event you haveforgoen thesecurity codeyour will need to use your backup
keys to gain access to your vault. Follow setup code instrucons.
If you have lost your backup keys, you will need to contact customer service at the
number below. Proof of purchase is required to obtain keys.
Contact Customer Service at [email protected] or [phone]
9. LOCKOUT MODE/ TAMPER PROTECTION
1. Three consecuve incorrect code entries will
put the vault in “Basic Lockout” mode. Touch
pad is deacvated for 30 seconds.
2. Aer “Basic Lockout” mode has ended, another
three consecuve incorrect code entries will result
in “Severe Lockout” mode. Touch pad is deacvated
for 5-minutes.

10. PROPER PLACEMENT AND MOVING OF VAULT
11. SECURING YOUR VAULT
1.
2.
SECURING YOUR VAULT WITH PROVIDED CABLE AND NUT
A security cable is included with
your vault. To secure the cable
around a fixed object, first loop
the cable around the object as
shown in the figure to the right.
Insert the threaded end of the cable
into the notch on the backside of
the vault while sll open.
3. From the inside of the vault, take
the provided nut and thread onto
the cable unl fully secured.
1. To maximize burglary protecon and stability,securing the vault to thefloor or
table is recommended.
2.
3. Always ensurethevault is in an isolated and dry area. Never place the vault in
direct contact with a wet floor. When installing your vault on a concrete floor,
useof a moisture/protecvebarrier is highly recommended. Failureto do so
or exposing the vault to chemicals or other adverse environments may void
the warranty.
SA Consumer Products recommends that you storeyour vault in a closet,office,
basement,bedroom or any other locaon that is convenient for you but out of
direct line of sight from prying eyes.
Step 1Step 2
VAULT
INSIDE
INSIDE OF VAULT,
THREAD NUT
ONTO CABLE
9

10
TOOLS AND HARDWARE NEEDED TO SECURE
VAULT TO A WOOD OR CONCRETE SURFACE:
12. SECURING YOUR VAULT (CONTINUED)
WASHERS
PADS
LAG BOLTS
ANCHORS
• DRILL/HAMMER DRILL
• 3/8�DRILL BIT
( FOR DRILLING ANCHOR HOLE )
or 3/16�(FOR INSTALL W/ OUT ANCHOR)
• SOCKET WRENCH TO MATCH
BOLT HEAD SIZE
• 2 STEEL LAG BOLTS (NOT INCLUDED) - SIZE 1/4" X 1.50" TO 2.0" LONG
• 2 STEEL WASHERS (NOT INCLUDED) - 1/4"
• 2 PLASTIC ANCHORS (NOT INCLUDED)- SIZE #10-12 X 1.5" TO 1.75" LONG
(FOR CONCRETE INSTALLATION)
• 4 PADS (INCLUDED)
Use the recommended hardware or consult your hardware retailer for fastening
hardware for your parcular mounng surface.
Open the vault door to provide access to the factory drilled bolt down holes that
are located under the protecve foam liner.
To secure your vault to the floor, it will first be necessary to mark and drill pilot
holes in the floor surface.
Drill the appropriate diameter and depth of pilot holes based on the type of
hardware being used and the type of floor surface. When mounng on concrete we
recommend using a hammer drill and a concrete drill bit to drill the two
corresponding holes in the mounng surface.
Secure the vault by threading anchor bolts through the factory drilled bolt down
holes in the vault and screw down ght with a ratchet wrench.
BOLT
WASHER
VAULT
FLOOR
MOUNTING
SURFACE
ANCHOR
FOR CONCRETE
INSTALLATION

11
14. MAINTAINING HINGES AND INTERNAL MECHANISMS
The hinges and internal locking mechanism are permanently lubricated, thus
needing no maintenance. Opening the door panel of your vault may void your
warranty. Always consult our customer service experts prior to doing so.
13. LOADING YOUR VAULT
1.
2.
Store ammunion separately from valuables.
Do not put anything in your vault that will put pressure against the door when
it is closed.

12
SA Consumer Products will repair or replace, at their sole discreon,
any Sports Afield vault damaged by fire, forced entry, forced aack
or natural flood for the lifeme of the original owner.
SA Consumer Products will repair or replace, at their sole discreon,
any Sports Afield vault with defecve parts, paint or lock for three
years of the original owner purchase date.
If SA Consumer Products deems a replacement vault is to be sent,
they will pay the freight costs to ship the replacement vault to the
original owner.
This three year warranty is limited to the vault and expressly
excludes any loss associated with the contents of the vault.
SA Consumer Products
reserves the right to receive full evidence
of your misfortune, such as a police report and/or homeowner’s
statement of coverage. This warranty is not valid outside of the
United States and Canada.
Proof of registraon and copy of sales receipt must be on file at
the me of claim. Visit our website at www.saproducts.com to
register your vault.
Three year warranty only applies to the original owner of the vault.
SA Consumer Products shall only be responsible and liable when the
vault is used in compliance with the direcons specified in your new
SA Consumer Products owner’s manual.
SA Consumer Products
requires that specific guidelines be
followed for repair. The vault will be repaired in-home if possible
(to include parts and labor); however, if factory replacement
is necessary (at
SA Consumer Products ’ sole discreon), the
replacement will be shipped freight prepaid, curbside delivery.
This warranty is inclusive and is in lieu of any and all other
warranes, express or implied. Specifically excluded are the
warranes of merchantability and fitness for a parcular purpose.
This warranty is limited to the vault itself and/or its value and
does not include consequenal damages of any kind including,
but not limited to, the contents in and of the vault.