SPORTS AFIELD HAVEN Series User manual

IMPORTANT:
Please read this information and follow all safety rules carefully before
operating your gun safe. Failure to do so will void your warranty.
102020
HAVEN SERIES
SA5925HX, SA5930HX & SA5942HX
INSTRUCTION MANUAL

TABLE OF CONTENTS
THIS MANUAL SERVICES THE FOLLOWING STYLE NUMBERS
SA5925HX SA5930HX SA5942HX
1
IMPORTANT INFORMATION ............................................................................................... 2
1. REGISTRATION ................................................................................................................ 3
2. UNDERSTANDING YOUR SAFE ........................................................................................ 4
3. UNBOXING ...................................................................................................................... 4
4. INSPECTION .................................................................................................................... 4
5. OPENING YOUR SAFE ...................................................................................................... 5
6. PROPER PLACEMENT AND MOVING OF SAFE ................................................................ 6
7. KEEPING YOUR SAFE DRY ............................................................................................... 6
8. SHIPPING AND SKID REMOVAL ...................................................................................... 7
9. SECURING YOUR SAFE .................................................................................................... 8
10. LOCK FACE INSTALLATION ............................................................................................ 9
11. LOCK FACE SECURITY CODE SETUP .............................................................................10
12. LOCKED OUT OF YOUR SAFE........................................................................................ 11
13. ANTI-THEFT ALERT SYSTEM ........................................................................................ 12
14. INTERIOR LIGHTING ..................................................................................................... 12
15. LOW BATTERY WARNING ............................................................................................ 13
16. LOCK FACE QUIET MODE ............................................................................................. 13
17. LOADING YOUR SAFE .................................................................................................. 13
18. MAINTAINING HINGES AND INTERNAL MECHANISMS .............................................. 13
www.sportsafieldsafes.com

2
Customer Service - [phone]
DISCLAIMER - READ BEFORE SAFE SETUP
WEAPON STORAGE
SAFETY
Thank you for choosing a Sports Afield Safe to protect your valuables. We are
commied to securing, organizing and protecng your most important documents,
valuables and keepsakes.
Your safe is built to last a lifeme. However, please understand that the locking
mechanism has precision parts. If you experience ANY difficulty opening or closing
your safe. DO NOT FORCE THE SAFE OPEN. Doing so may jam the components in
the lock, which will require a safe technician to unlock your safe. This causes an
inconvenience to you and may lead to a claim denial.
If you experience problems or challenges with your safe, please contact us.
Many issues can be quickly resolved without the product being returned.
Safe bodies and doors are extremely heavy thus SA Consumer Products Requires a
minimum of two people to insure stability of the safe during installaon. Always ensure
proper installaon, as laid out in this manual, and do not open the door with the safe
on an uneven or unstable floor. Ignoring this could result in serious injury or death.
Keep a record of your combinaon number in a secure place, away from children,
and separate from your safe. You will need this informaon along with your proof
of purchase to obtain technical assistance and replacement keys.
If you choose to ulize this safe to store a weapon always follow proper weapon
and local laws when storing a weapon.
SA Consumer Products strongly recommends that you do not store loaded guns.
Always follow the firearm safety rules set out by the firearm’s manufacturer.
A Sports Afield Safe or any other firearm storage device cannot take the place
of other safety procedures including advising children of the dangers of firearms.
SA Consumer Products and its distributors of the Sports Afield Safes do not
recommend, suggest, advise, promote, or otherwise condone the ownership
or use of firearms. We believe the decision to own or use a firearm is a serious
decision that should only be made by an adult who has carefully considered
the risks and benefits of such a decision.
PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR
SPORTS AFIELD SAFE.
DO NOT LOCK THIS MANUAL OR THE OVERRIDE ACCESS KEYS IN YOUR SAFE.

www.sportsafieldsafes.com
REGISTRATION INFORMATION
Customer Service - [phone]
PURCHASE DATE:
PURCHASE PRICE (BEFORE TAX):
MODEL NUMBER:
SERIAL NUMBER:
KEY NUMBER (IF APPLICABLE):
3
1. REGISTRATION
RETAILER PURCHASED AT:
Please ensure you register your safe by vising our website. Locate the
“contact” buon on the top header on the home page. Select registraon
from the drop down menu.
By registering your Sports Afield Safe we will be able to expedite and address
any problems or challenges you may have which would otherwise require a
notary leer and proof of payment.
The informaon you record onto this page will be required in the event you
cannot access the contents of your Sports Afield Safe. Please fill out all the
required informaon below and retain for your records and safe keeping.
PLEASE HAVE THIS INFORMATION READY PRIOR TO CALLING FOR TECHNICAL
ASSISTANCE AT:

2. UNDERSTANDING YOUR SAFE
4. INSPECTION
3. UNBOXING
Make sure to inspect your safe for shipping damage before accepng delivery.
If you find any damage, please contact the delivery company (or carrier) immediately.
Any damage not noted upon delivery must be reported within fieen (15) days
or there will be no recourse. Any noted damage at the me of delivery must be
resolved with the delivery company and/or retailer. Shipping damage is not
warrantable by SA Consumer Products.
WARNING: SAFES ARE HEAVY AND CAN BE UNSTABLE ON UNEVEN GROUND.
PLEASE ENSURE EXTRA CAUTION WHEN DEALING WITH OR MOVING UNSECURED
SAFES. WHILE UNBOXING BE SURE TO HAVE A SECOND PERSON HOLD AND
STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING INJURY, AND/OR
DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.
Removethe packaging. If your safe is sll on shipping feet you can simply li
the box up and offthe safe once the strapping has been removed. If your safe
does not have shipping feet you will needto carefully removethe box, ensuring
not to damage the safe and/or injure yourself. You will want to have someone
stabilize the safe when removing the cardboard and other packing material
from underneath the safe.
Illuminated
Lock Face
5 Spoke
Handle
Override
Key Entry
(underneath
keypad)
External
Hinges
Fully Wrapped
Adjustable Shelf
Bolt Down
Hole
AA Battery
Compartment
9V Battery
Compartment
Reset
Button
Triple
Seal
Adjustable
Shelf Rails
UL Approved
Electrical Outlet
Steel
Reinforced
Top Shelf
Active
Locking
Bolts
Deluxe
Door
Organizer
4

1.
3.
5. OPENING YOUR SAFE
2. Install the single handle spoke
handle by inserng into one
of the threaded openings
and twisng clockwise unl
you feel the spoke fully lock
into place.
Locate the backup keys and
single handle spoke inside
the plasc bag hanging on
the front of the safe.
Locate the keyhole in the
safe door. Insert and turn
the backup key clockwise
from 9 to the 1 o’clock
posion to unlock.
CONTENTS:
USERS MANUAL, FAILSAFE
KEY AND HANDLE SPOKE
Step 4 Step 3 Step 2 Step 1
4. Turn the handle clockwise
unl the safe dooropens.
Once open, turn the handle
back to its starng posion
so the bolts are open and
extended. Remove key.
5

6. PROPER PLACEMENT AND MOVING OF SAFE
1.
2.
3.
WARNING: SAFES ARE VERY HEAVY AND AWKWARD TO HANDLE. PLEASE USE THE
UTMOST CARE IN MOVING THE SAFE. UTILIZING A TRAINED PROFESSIONAL WITH
PROPER MOVING EQUIPMENT IS HIGHLY RECOMMENDED.
The locaon of the gun safe is very important and the utmost care should be taken
during this consideraon.
To maximize the fire protecon of your safe, we recommend you place the safe in
lower levels in your home where fire temperatures are lower and away from highly
combusble materials.
To maximize burglary protecon and stability, securing the safe to the floor
is recommended.
SA Consumer Products recommends that you store your safe in a closet, office,
basement, bedroom or any other locaon that is convenient for you but out of
direct line of sight from prying eyes. The locaon of the gun safe is very important.
Using a dolly capable of supporng the size and weight of your safe,move the safe
to your desired locaon. Please take all necessary precauons to protect and prevent
any damage to your flooring.
HELPFUL: TO DETERMINE WHETHER YOUR SAFE WILL MAKE IT THROUGH DOORWAYS,
STAIRS, OR CORNERS, TAKE THE EMPTY SAFE BOX AND SEE IF IT WILL FIT ALL THE WAY
THROUGH TO ITS FINAL LOCATION.
1.
2.
3.
6
The safe should be installed adjacent to a side wall with minimal space on either
side of the safe. Wherever possible,the safe should be flat against the wall and
floor. Remove the baseboard and/or wall trim if necessary.
Always ensure the safe is in an isolated and dry area. Never place the safe in direct
contact with a wet floor. When installing your safe on a concrete floor,use of a
moisture/protecve barrier is highly recommended. Failure to do so, or exposing
the safe to chemicals or other adverse environments, may void the warranty.
If your safe seems unlevel, you may need to shim the boom of the safe to
prevent the door from swinging open too quickly, or closing on itself.
7. KEEPING YOUR SAFE DRY
We recommend placing a moisture/protecve barrier between your safe and
concrete floor to prevent any moisture, mildew and rust damage the safe. Installing
your safe in a place with climate control (heat in the winter and cooling in the summer)
is highly recommended. In areas of high humidity or frequent temperature fluctuaons
(garages) it is recommend to take appropriate precauons to ward against moisture
damage. We strongly encourage the use of an internal dehumidifier and/or desiccants
to protect your contents from rust or mildew. Internal dehumidifiers should not be
in direct contact with the side or back walls.

7
1.
2.
3.
4.
8. SHIPPING AND SKID REMOVAL
WARNING: WHILE REMOVING THE BOLTS FROM THE SKIDS, BE SURE TO HAVE
A PERSON HOLD AND STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING
INJURY, AND/OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.
WARNING: BEFORE REMOVING THE SHIPPING SKIDS, MAKE SURE THE DOOR
IS CLOSED AND LOCKED. THE DOOR OF YOUR SAFE IS HEAVY AND PRESENTS
A SAFETY HAZARD UNTIL THE SAFE IS BOLTED DOWN OR SECURED PROPERLY.
Upon receiving your safe, you may find it aached to a shipping skid. The skid
is secured from the underside of the safe by four bolts. Remove the four bolts
that secure the safe to the skids using a wrench or 11/16” (17mm) socket.
With a person stabilizing the safe, carefully lt the safe to the le and pull the
shipping skid on the right side away from the boom of the safe.
With the shipping skid removed from one side of the safe, carefully lower the
safe to the floor.
Follow the same procedure to remove the remaining shipping skid.

9. SECURING YOUR SAFE
1.
2.
3.
4.
5.
6.
WARNING: YOUR SAFE IS DESIGNED TO SUPPORT ITSELF WHEN THE DOOR IS OPENED.
HOWEVER, CAUTION SHOULD BE USED TO AVOID TIPPING. WHILE SECURING YOUR
SAFE BE SURE TO HAVE A SECOND PERSON HOLD AND STABILIZE THE SAFE TO KEEP IT
FROM TIPPING, CAUSING INJURY, AND/OR DAMAGE TO THE SAFE AND SURROUNDING
STRUCTURES. FAILURE TO DO SO WILL COMPROMISE THE SAFETY, SECURITY, AND
WARRANTY OF THE SAFE.
TOOLS NEEDED TO BOLT SAFE TO A CONCRETE SURFACE
• DRILL / HAMMER DRILL
• DRILL BIT – 1/2” ( for installing into concrete with provided hardware)
• WRENCH / 11/16” (17MM) SOCKET
• HAMMER
Use the hardware provided or consult your hardware retailer for fastening
hardware for your parcular mounng surface.
Open your safe door and locate and remove the four black caps on the
safe floor. This will provide access to the factory drilled bolt down holes.
To secure your safe to the floor it will first be necessary to drill pilot holes
in the floor surface.
7. Replace the four black caps onto the floor of the safe. 8
Drill the appropriate diameter and depth of pilot holes based on the type of
hardware being used and the type of floor surface. For the hardware provided
(concrete floor installaon) we recommend using a hammer drill and 1/2”
concrete drill bit to drill holes the four corresponding in the concrete floor.
Insert and drive the plasc anchoring plugs into the pilot holes. You may need
to use a hammer to fully insert the plugs into the pilot holes.
Secure the safe, by threading all 4 anchor bolts through the factory drilled bolt
down holes in the boom of the safe and ratcheng down ght.
Make sure the metal washer sits on top of the rubber washer. Tighten the
bolt to compress the rubber washer between the safe and metal washer.
Failure to do so will allow water to enter the safe in the event of a flood.

9
4.
Plug lock face cable into the
back of the lock face. The
cable will only be able to fit
one way.
2. The lock face requires 1x9V
alkaline baery. Locate the
baery compartment on
the back of the lock face.
Insert the baery in the
proper orientaon. Lock face
will beep when baeries
are successfully installed.
WARNING: The baeries must be
inserted with the correct polarity.
Exhausted baeries must be removed
from the product and discarded safely.
Do not mix old and new baeries. Do not
mix alkaline or standard (carbon – zinc)
baeries. Do not use rechargeable
(nickel – cadmium) baeries.
1. Remove lock face from box
located inside of safe.
3.
10. LOCK FACE INSTALLATION
Align the lock face to the
backer plate, with the lock
face slightly rotated to the
le. Turn clockwise unl you
feel the lock face click into
place. Once the lock face has
been installed, locate the
remaining handle spokes
inside of the safe. Insert each
individual spoke into a
threaded opening and turn
clockwise to install.
Step 3 Step 2 Step 1
BACK OF LOCK FACE
FRONT OF LOCK FACE
9V BATTERY
Step 4
8
#
1 2 3 4
56 7
*90
8
#
1 2 3 4
56 7
*90

Step 3 Step 2
2.
3.
Inside of the safe door, locate the small
brass cap. Unscrew and remove the cap,
you will now see the red reset buon.
Press and release the reset buon. You
will hear a beep. The yellow (le) light
on the lock face will illuminate indicang
you are now in programming mode.
While the yellow (le LED) is illuminated,
enter your new 3 to 8-digit security code
followed by [*] One beep will sound.
Aer beep, re-enter the same security
code followed by [*]. Lock face will beep
twice indicang successful programming.
11. LOCK FACE SECURITY CODE SETUP
Important: It is necessary to reprogram your safe with a new security code you
have personally selected to provide maximum household security. Be careful
in choosing your new security code, you’ll want to be sure that you can operate
the unit quickly without making an error.
1. Swipe finger(s) across the keypad to
“wake up” and acvate the lockface. Two
random numbers will illuminate when
the lock face wakes up. Individually
press both of the two numbers, in any
order, to allow full access to the keypad.
Insert the factory preset code of
(1-5-9-#). This will unlock the safe in a
DEFAULT MODE. (DO NOT use this code
while securing items in your safe)
Step 1
10
NEW 3-8 DIGIT SECURITY CODE
Red Reset Button
Brass Cap
8
#
1 2 3 4
5 6 7
*90
8
#
1 2 3 4
5 6 7
*90
MUST ENTER SECURITY CODE PLUS *
TWICE FOR ENTRY TO BE RECOGNIZED

Step 4
4. While the safe door is sll open,
confirm your newly entered security
code. Wake up the keypad by swiping
the keypad with your finger(s). Then
enter the 3-8 digit code followed by
the [ # ]. If successful you will hear
two beeps and the green light will
illuminate, allowing you to retract
the bolts.
Customer Service - [phone]
12. LOCKED OUT OF YOUR SAFE
In the event you have forgoen the security code your primary acon will be to use
your backup keys in order to gain access to your safe and follow the Lock Face Security
Setup Code instrucons, starng at step 2 of acvang the brass reset buon.
If you have lost your backup keys, you will need to contact customer service at the
number below. Proof of purchase is required to obtain keys.
Always remember to SWIPE your finger(s) across the surface of the keypad to wake
the keypad in order to enter the keypad codes. Simply touching the keypad may not
trigger a sensor point on the key pad to acvate keypad.
Note: Do not shut the safe door unl you have confirmed your new security code
at least 3 mes to ensure your code has been saved and you can open the door
successfully. If the code fails, the yellow (le) light will flash and beep. Repeat the
steps above unl successful.
WARNING: If the incorrect security code is entered 3 mes you will have an
automac lockout for 30 seconds before you can enter your code again. If 3
addional failed aempts are made, the keypad will lockout for 5 minutes. Leave
baeries in to go through lockout cycle. If baeries are removed the mer will
restart zero.
11. LOCK FACE SECURITY CODE SETUP (Continued)
8
#
1 2 3 4
56 7
*90
11
Green = Successful Entry

13. ANTI-THEFT ALERT SYSTEM
14. INTERIOR LIGHTING
Baery Holder
AA
AA
AA
AA
Step 1
1.
2.
3.
The alarm requires 4 x AA
alkaline baeries. Locate the
baery compartment on the
inside of the door panel. Insert
the baeries in the proper
orientaon and order. Keypad
will beep when baeries are
successfully installed. Replace
baery cover.
You are receiving the safe with the the alarm system fully
acvated. If the safe is tampered with, or the keypad receives
too many incorrect aempts at entry, the alarm will sound.
To immediately stop the alarm from sounding, you must first
gain access to your safe. Enter your security code which will
automacally silence the alarm or use your manual override
key to gain access to the safe and remove the alarm baeries
located on the interior of the door.
To deacvate the alarm funcon press (*99) on the keypad.
To reacvate the alarm funcons if deacvated, press (*00) on the keypad.
12
The alarm system also comes with a lockout mer to prevent unauthorized
entry. 3 consecuve incorrect entries will cause your keypad to enter basic lockout
mode, locking the keypad for 30 seconds paired with a 30 second alarm. 5 incorrect
consecuve entries will cause the keypad to enter severe lockout mode, meaning
the keypad will remained locked out for 5 minutes as well as a sounding alarm for
2 minutes.
This safe comes with moon acvated interior lighng installed. When the safe is
plugged into a power source and USB connecon of the lighng system is plugged
into the internal power receptacle, the lighng will funcon automacally. When
powered on, moon will acvate the system and turn on the interior light which
will remain on for 30 seconds. Lights will be acvated for an addional 30 seconds
upon sensing any movement.
WARNING: The baeries must be inserted
with the correct polarity. Exhausted baeries
must be removed from the product and
discarded safely. Do not mix old and new
baeries. Do not mix alkaline or standard
(carbon – zinc) baeries. Do not use
rechargeable (nickel – cadmium) baeries.

8
#
1 2 3 4
56 7
*90
15. LOW BATTERY WARNING
Red = Low Baery
16. LOCK FACE QUIET MODE
1. To mute the lockface,enter the code [ * 6 3 3 ].
2. To turn the sound back on,enter code [ * 6 6 ].
By acvang the lock face quiet mode, the safe will no longer
make audible sound when interacng with safe, allowing
for silent access.
This lock face is equipped to alert you when the baeries
are low by illuminang the red light (center) when any
buon is pressed on the keypad. Please replace baeries
immediately when receiving this warning.
Always test the baeries when installing or replacing.
If the red light comes on when a buon is pressed you
know the baeries are not fully charged.
1.
2.
3.
4.
17. LOADING YOUR SAFE
18. MAINTAINING HINGES AND INTERNAL MECHANISMS
5.
Store documents or heat sensive items in the boom of the safe for greatest
protecon against fire damage.
Store ammunion separately from valuables.
Do not put anything in your safe that will put pressure against the door when
it is closed.
Select safe models have reinforced shelving, but as a good safety precauon store
heavier items either on the floor of the safe, or away from the middle of the shelves.
When loading guns into your safe, make sure they rest securely against the cutouts
provided in the gun racks to prevent accidental pping when the door is closed.
The hinges and internal locking mechanism are permanently lubricated, thus
needing no maintenance. Opening the door panel of your safe may void your
warranty. Always consult our customer service experts prior to doing so.
13

LIFETIME WARRANTY
SA Consumer Products, Inc. will repair or replace, at their sole
discretion, any Sports Afield Gun Safe damaged by fire, forced
entry, forced attack or natural flood for the lifetime of the
original owner.
SA Consumer Products, Inc. will repair or replace, at their sole
discretion, any Sports Afield Gun Safe with defective parts, paint
or lock for the lifetime or the original owner.
If SA Consumer Products, Inc. deems a replacement safe is to be
sent, they will pay the freight costs to ship the replacement safe
to the original owner.
This lifetime warranty is limited to the safe and expressly excludes
any loss associated with the contents of the safe.
SA Consumer Products, Inc. reserves the right to receive full
evidence of your misfortune, such as a police report and/or
homeowners statement of coverage. This warranty is not valid
outside of the United States and Canada.
Proof of registration and copy of sales receipt must be on file at
the time of claim. Visit our website at www.sportsafieldsafes.com
to register your safe.
Lifetime warranty only applies to the original owner of the safe.
SA Consumer Products, Inc. shall only be responsible and liable
when the safe is used in compliance with the directions specified
in your new Sports Afield Safe Owner’s Manual.
SA Consumer Products, Inc. requires that specific guidelines be
followed for repair. The safe will be repaired in-home if possible
(to include parts and labor); however, if factory replacement is
necessary (at SA Consumer Products, Inc.’s sole discretion), the
replacement will be shipped freight prepaid, curbside delivery.
This warranty is inclusive and is in lieu of any and all other
warranties, express or implied. Specifically excluded are the
warranties of merchantability and fitness for a particular purpose.
This warranty is limited to the safe itself and/or its value and
does not include consequential damages of any kind including,
but not limited to, the contents in and of the safe.