SPORTS AFIELD Gun Safe User manual

Please read this information and follow all safety rules carefully before
operating your gun safe. Failure to do so will void your warranty.
GUN SAFE | INSTRUCTION MANUAL

OM_GS_0218 www.sportsafieldsafes.com 1
IMPORTANT INFORMATION
ATTENTION
PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR SPORTS
AFIELD GUN SAFE.
DO NOT LOCK THIS MANUAL OR THE OVERRIDE ACCESS KEYS IN YOUR SAFE.
Thank you for choosing a Sports Afield Gun Safe to protect your valuables. We are
committed to securing, organizing and protecting your most important documents,
valuables and keepsakes.
Your gun safe is built to last a lifetime. However, please understand that the locking
mechanism has precision parts. If you experience ANY difficulty opening or closing
your gun safe, DO NOT FORCE THE GUN SAFE OPEN. Doing so may jam the
components in the lock, which will require a safe technician to unlock your safe.
This causes an inconvenience for you, and may lead to a claim denial.
If you experience problems or challenges with your gun safe, please contact us.
Many issues can be quickly resolved without the product being returned.
Customer Service - [phone]
1REGISTRATION
Please ensure you register your new gun safe by visiting our website. Locate the
“contact’ button located on the top right of the home page. Select registration from
the drop down menu.
www.sportsafieldsafes.com
By registering your Sports Afield Gun Safe we will be able to expedite and address
any problems or challenges you may have which would otherwise require a notary
letter and proof of payment.

OM_GS_0218 www.sportsafieldsafes.com 2
REGISTRATION INFORMATION
The information you record onto this page will be required in the event you cannot
access the contents of your Sports Afield Gun Safe. Please fill out all the required
information below and retain for your records and safe keeping.
PLEASE HAVE THIS INFORMATION READY PRIOR TO CALLING FOR TECHNICAL
ASSISTANCE AT:
Customer Service - [phone]
PURCHASE DATE:
PURCHASE PRICE (BEFORE TAX):
MODEL NUMBER:
SERIAL NUMBER:
PURCHASE LOCATION:
KEY NUMBER (IF APPLICABLE):

OM_GS_0218 www.sportsafieldsafes.com 3
SAFETY & SECURITY
IMPORTANT
Always follow proper weapon and local laws when storing a weapon. SA Consumer
Products strongly recommends that you do not store LOADED guns in this unit.
IMPORTANT
Always follow the firearm safety rules set out by the firearm’s manufacturer.
IMPORTANT
The Sports Afield Gun Safe or any other firearm storage device cannot take the
place of other safety procedures including advising children of the dangers of
firearms.
IMPORTANT
YOUR GUN SAFE IS ONLY PART OF YOUR TOTAL SECURITY PROTECTION.
SA Consumer Products recommends that you store your Gun Safe in a closet, office,
basement, bedroom or any other location that is convenient for you but out of
direct line of sight from prying eyes. The location of the Gun Safe is very important
and the outmost care should be taken during this consideration.
NOTE
SA Consumer Products and its distributors of the Sports Afield Gun Safes do not
recommend, suggest, advise, promote, or otherwise condone the ownership or use
of firearms. We believe the decision to own or use a firearm is a serious decision
that should only be made by an adult who has carefully considered the risks and
benefits of such a decision.
NOTE
Keep your combination number and keys in a secure place, away from children.
Keep a record of your combination number in a secure place separate from your
Gun Safe. You will need this information along with your proof of purchase to
obtain technical assistance and replacement keys.
WARNING
The gun safe and safe door is heavy. Always ensure proper installation and do not
open the door with the safe on an uneven or unstable floor. Ignoring this could
result in serious injury or death.

OM_GS_0218 www.sportsafieldsafes.com 4
TABLE OF CONTENTS
2SECTIONS
IMPORTANT INFORMATION........................................................................................1
1REGISTRATION....................................................................................................1
3UNDERSTANDING YOUR SAFE ............................................................................5
4INSPECTING YOUR SAFE .....................................................................................7
5UNBOXING..........................................................................................................7
6UNDERSTANDING YOUR MODEL NUMBER ........................................................7
7GENERAL E-LOCK OPENING INSTRUCTIONS .......................................................8
8GENERAL E-LOCK BATTERY INSTALLATION.........................................................9
9GENERAL E-LOCK SECURITY CODE SETUP.........................................................10
10 GENERAL E-LOCK QUIET MODE........................................................................11
11 ESL5 UL E-LOCK BATTERY INSTALLATION .........................................................11
12 ESL5 UL E-LOCK OPENING INSTRUCTIONS........................................................11
13 ESL5 UL E-LOCK SECURITY CODE SETUP ...........................................................12
14 ESL5 UL E-LOCK QUIET MODE ..........................................................................13
15 SANCTUARY SERIES OPENING INSTRUCTIONS .................................................13
16 SANCTUARY SERIES E-LOCK BATTERY INSTALLATION ......................................13
17 SANCTUARY SERIES E-LOCK SECURITY CODE SETUP ........................................14
18 SANCTUARY SERIES E-LOCK QUIET MODE........................................................14
19 SANCTUARY SERIES RESETTING TO FACTORY PRESETS ....................................15
20 ANTI THEFT ALERT ALARM SYSTEM..................................................................15
21 SHIPPING SKID REMOVAL.................................................................................16
22 MOVING YOUR SAFE ........................................................................................17
23 SECURING YOUR SAFE ......................................................................................18
24 LOADING YOUR SAFE........................................................................................19
25 KEEPING SAFE DRY ...........................................................................................19
26 HINGES AND INTERNAL MECHANISM ..............................................................19
27 LOCKING BOLTS ................................................................................................20
28 CLEANING .........................................................................................................20
29 HOW TO OBTAIN LOST KEYS.............................................................................20
30 NOTES...............................................................................................................21
31 WARRANTY.......................................................................................................22

OM_GS_0218 www.sportsafieldsafes.com 5
GETTING STARTED
3UNDERSTANDING YOUR SAFE
Illuminated
Behind E-Lock

OM_GS_0218 www.sportsafieldsafes.com 6
REFERENCE IMAGES. ACTUAL MODEL AND DESIGN MAY VARY

OM_GS_0218 www.sportsafieldsafes.com 7
4INSPECTING YOUR SAFE
Make sure to inspect your safe for shipping damage as soon as you receive it. If you
find any damage, please contact the delivery company (or carrier) immediately.
Any damage not noted upon delivery must be reported within fifteen (15) days or
there will be no recourse. Any noted damage at the time of delivery must be
resolved with the delivery company and/or your retailer. Shipping damage is not
warrantable by SA Products.
5UNBOXING
WARNING: GUN SAFES ARE HEAVY AND CAN BE UNSTABBLE ON UNEVEN
GROUND. PLEASE ENSURE EXTRA CAUTION WHEN DEALING WITH OR MOVING
UNSECURED SAFES.
1. Remove the packaging. If your safe is on shipping feet you can simply lift the
box up and off the safe once the strapping has been removed. If your safe does
not have shipping feet you will need to carefully remove the box, ensuring not
to damage the safe and/or injury yourself. You will want to have someone
stabilize the safe when removing the cardboard and other packing material from
underneath the safe.
2. Locate and remove the plastic bag hanging from the handle on the front of the
safe. Inside you will find the necessary items required to open your safe.
Remove all items and prepare to access your safe for the first time.
Congratulations!
6UNDERSTANDING YOUR MODEL NUMBER
FOR SPORTS AFIELD MODELS LISTED BELOW, INCLUDING THE HAVEN, PRESERVE,
TAC LZ & JOURNEY SERIES SAFES, please refer to sections 7-10 for safe and E-Lock
opening and operating instructions.
SA5925H
SA5930H
SA5942h
SA5520P
SA5924P
SA5932P
SA5932PG
SA5940P
SA5940PG
SA7240P
SA5520LZ
SA6033LZ
SA5516J
SA5520J
SA5524J
SA20
SA24
SA36
SA48
SA48GLOSS
SA64
SA80
SA6040WP
3B5942H

OM_GS_0218 www.sportsafieldsafes.com 8
FOR SPORTS AFIELD MAXIMUM SECURITY SERIES SAFES please refer to sections
11-14 for the ESL5 UL E-Lock opening and operating instructions.
SA6028USA
SA6028USAGLOSS
SA6043USA
SA6034USAGLOSS
SA6239USA
SAS6239USAGLOSS
FOR SPORTS AFIELD SANCTUARY SERIES SAFES please refer to sections 15-19 for
the safe and E-Lock opening and operating instructions.
SA3525S
SA5936S
OPERATING YOUR SAFE
IMPORTANT: Depending on the model number of your safe, the first-time
opening instructions and battery installation process may be slightly different.
Please refer to your specific set of instructions.
7GENERAL E-LOCK OPENING INSTRUCTIONS
WARNING: Never leave the override keys inside your safe. You will need the
override keys to open your gun safe until you have successfully programmed the
electronic lock, or if the batteries are not replaced in a timely manner.
1. Locate the override keys
inside the plastic bag hanging
on the front of the gun safe
2. Gently remove the electronic
keypad from the safe by
rotating counter-clockwise.
The keypad with detach from
the locking ring; allow the
keypad to hang gently below
the locking ring
3. Locate the keyhole in the
locking ring. Insert and turn
the key clockwise from 9 to 1
o’clock to unlock.

OM_GS_0218 www.sportsafieldsafes.com 9
4. Locate the single spoke in the plastic bag hanging on the front of the safe and
attach it to the spindle hub, turning clockwise until snug. Gently turn the
handle clockwise until the locking bolts are retracted and you can open the
safe door.
5. Inside your safe is a small box containing the remaining spokes for safe handle.
Remove the spokes from the packaging and thread into the respective holes on
the spindle hub.
NOTE FOR DROP HANDLE LEVERS: Your handle is installed at the factory and
requires no action on your part.
8GENERAL E-LOCK BATTERY INSTALLATION
IMPORTANT: The first time you open your safe you will need to use the override
key. Once the safe is opened, the batteries can be inserted. The batteries are in
the plastic bag with this manual.
1. The E-Lock on the Sports Afield Haven, Preserve, Tac LZ and Journey Series
require 4 x AA alkaline batteries
2. Open the battery compartment located on the interior of the door towards the
upper hinge
3. Insert the batteries in the proper orientation and order
4. Close the battery compartment door. Always ensure you are using new, brand
name batteries with full charge.
NOTE: This E-Lock is equipped to alert you when the batteries are low by
illuminating the red and green light on the keypad when any button is pressed.
Always test the batteries when installing or replacing. If the red and green lights
on the lock face turn on when a button is pressed, you know the batteries are not
fully charged.
NOTE: The batteries must be inserted with the correct polarity. Exhausted
batteries must be removed from the product and discarded safely. Do not mix old
and new batteries. Do not mix alkaline or standard (carbon –zinc) batteris. Do
not use rechargeable (nickel –cadmium) batteries.

OM_GS_0218 www.sportsafieldsafes.com 10
9GENERAL E-LOCK SECURITY CODE SETUP
IMPORTANT: It is necessary to re-program your gun safe with a new security
code you have personally selected to provide maximum household security.
A security code is a series of entries on the keypad. An “entry” is a single press of
one button/digit. Your security code must be between 3 and 8 digits. Choose a
security code that is easy to use, but difficult to guess. A poor example would be
1-1-1-1 or 4-3-2-1-1-2-3-4.
Be careful in choosing your security code. You’ll want to be sure that you can
operate the unit quickly without making an entry error.
1. All Sports Afield Haven, Preserve, Tac LZ and Journey Series come with a preset
factory code of [ 1 5 9 #].
2. For the Haven Series, you first have to wake the keypad up by pressing any
number on the keypad. Then, enter the code [ 1 5 9 # ]. You will hear a beep
with each button push. If the code was successfully entered you will hear two
beeps and the green light will illuminate. Open the door by rotating the handle
clockwise.
3. For all other models including in the Preserve, Tac LZ and Journey Series, simply
enter the code [ 1 5 9 # ]. You will hear a beep with each button push. If the
code was successfully entered you will hear two beeps and the green light will
illuminate. Open the door by rotating the handle clockwise.
4. With the door open, now rotate the handle counter-clockwise locking out and
extending the active bolts.
5. Next, on the inside of the safe, near the battery compartment, locate the small
copper cap. Unscrew and remove the cap.
6. Press and release the reset button. You will hear a beep. The yellow light on
the E-lock will illuminate so that you can enter your new code. You can only
enter a new code while the yellow light is on.
7. Ensure your bolts are in the extended positon, enter your new security code
(between 3 and 8 digits).
8. Confirm your new security code by pressing the [ *] symbol
9. DO NOT shut the safe door until you have confirmed your new security code at
least 3 times to insure the code has been saved and you can lock and unlock
the door successfully.
10. Reinstall the copper cap over the reset button and close the door.
IMPORTANT: If the code fails, repeat the steps above until your code is accepted.
If the incorrect security code is entered 3 times you will have an automatic
lockout for 20 seconds before you can try your code again. If 3 additional failed
attempts are made, the keypad will lockout for 10 minutes.

OM_GS_0218 www.sportsafieldsafes.com 11
NOTE: After you have entered the correct security code you have 5 seconds to
turn the handle and unlock the door before the locking mechanism is reactivated.
10 GENERAL E-LOCK QUIET MODE
1. To mute the E-Lock, enter code [ * 6 3 3 ]
2. To turn the sound back on, enter code [ * 6 6 ]
11 ESL5 UL E-LOCK BATTERY INSTALLATION
NOTE: The Sports Afield Maximum Security Series gun safes do not come with
override keys and must be opened using the E-Lock.
1. The ESL5 UL E-Lock on the Sports Afield Maximum Security Series safes require
a 9V alkaline battery.
2. The battery compartment is located under the keypad. To access, rotate the
keypad up to the left to release the E-lock from the locking ring.
3. Snap the 9V battery to the connector in the proper orientation.
4. Reinstall the keypad back onto the locking ring.
5. The E-Lock is ready to be programmed.
NOTE: This ESL5 UL E-Lock is equipped to alert you to a low battery by producing a
series of beeps (8 times). If you hear this, the battery needs replacing.
NOTE: The battery is to be inserted with the correct polarity. Exhausted batteries
must be removed from the product and discarded safely.
12 ESL5 UL E-LOCK OPENING INSTRUCTIONS
1. All Sports Afield Maximum Security Series gun safes come with a preset factory
code of [ 1 2 3 4 5 6 # ].
2. Press the [ C ] key followed by preset factory code [ 1 2 3 4 5 6 # ]. You will
hear a beep with each button push. If the code was successfully entered, you
will hear two beeps and the green light will illuminate.
3. To open the door, take a firm hold of the spindle hub, and rotate clockwise
4. Inside the safe, locate the spindle handles and thread into the respective holes
on the spindle hub.

OM_GS_0218 www.sportsafieldsafes.com 12
13 ESL5 UL E-LOCK SECURITY CODE SETUP
IMPORTANT. It is necessary to re-program your gun safe with a new security
code you have personally selected to provide maximum household security.
A security code is a series of entries on the keypad. An “entry” is a single press of
one button/digit. You must use a 6-digit security code. Choose a security code
which is easy to use, but difficult to guess. A poor example for a secure code would
be 1-1-1-1-1-1 or 3-2-1-1-2-3.
ENSURE YOU DOOR IS OPEN
1. Locate and press the detent rod, positioned on the door frame near the hinges
2. With the detent rod pushed, extend the locking bolts by turning the handle
counter-clockwise
3. Press the [ C] key and then the [ #] key. The ESL5 E-Lock will produce a short
warbling tone (called the “good combo tone”) and the key pad lights strobe
with the tone.
4. Key in the last known 6-digit code. If this is the first time setting up your gun
safe enter the preset factory code [ 1 2 3 4 5 6 # ]. The [ C ] key can be used at
any time to clear an error in keying.
5. Next, enter your new 6-digit security code followed by the [ # ] key. The
warbling tone can be heard with valid entry.
6. Re-enter your new 6-digit security code followed by the [ # ] key to confirm.
The warbling tone can be heard confirming the new security code has been
successfully programmed.
7. If the code fails, you will hear four short beeps. The keypad returns to rest and
the process starts over. Repeat the steps above until successful.
IMPORTANT: DO NOT shut the safe door until you have confirmed you’re your
new security code has been entered correctly. Try your new security code at least
3 times to make sure the code has been saved, and you can lock and unlock the
door successfully.
NOTE. To wake up system, press the [ C ] key before entering any codes.

OM_GS_0218 www.sportsafieldsafes.com 13
14 ESL5 UL E-LOCK QUIET MODE
1. To mute the E-Lock, press [ C # ] and listen for a short warbling sound. Next,
press [ 8 0 # ] and listen for a short warbling sound. Lastly, press [ 1 # ] and
listen for a long warbling sound.
2. To un-mute the E-Lock, press [ C # ] and listen for a short warbling sound. Next,
press [ 8 0 # ] and listen for a short warbling sound. Lastly, press [ 0 # ] and
listen for a long warbling sound.
15 SANCTUARY SERIES OPENING INSTRUCTIONS
1. Locate the override keys inside the plastic bag hanging on the front of the safe.
2. Gently remove the E-Lock from the safe by sliding the entire unit upwards, until
the keypad detaches from the two mounting screws on the door of the safe.
Allow the keypad to gently hang from the wires.
3. Locate the circular keyhole in the door of the safe. Insert and turn the key.
4. To open the safe door, locate the single spoke in the plastic bag hanging on the
front of the safe and attach it to the spindle hub, turning clockwise until snug.
Gently turn the handle clockwise until the safe door opens.
5. Inside your safe is a small box containing the remaining spokes for safe handle.
Remove the spokes from the packaging and thread into the respective holes on
the spindle hub.
16 SANCTUARY SERIES E-LOCK BATTERY INSTALLATION
1. The E-Lock on the Sanctuary Series safes require 4 x AA alkaline batteries.
Always ensure you are using new, brand name batteries with full charge.
2. Open the battery compartment on the backside of the E-Lock.
3. Insert the batteries in the proper orientation and order.
4. Replace the E-Lock onto the safe door by aligning the keyhole slots on the back
of the E-Lock with the E-Lock mounting screws, sliding downward until you feel
a noticeable click or physical stop.
5. If the E-Lock is too loose or tight when properly installed onto the safe door,
the E-Lock mounting screws can be adjusted by simply tightening or loosening
them.
NOTE: This E-Lock is equipped to alert you when the batteries are low by
illuminating the red and yellow light on the keypad when any button is pressed.
Always test the batteries when installing or replacing. If the red and yellow light
on the lock face turns on when a button is pressed, you know the batteries are
not fully charged.

OM_GS_0218 www.sportsafieldsafes.com 14
NOTE: The batteries must be inserted with the correct polarity. Exhausted
batteries must be removed from the product and discarded safely. Do not mix old
and new batteries. Do not mix alkaline or standard (carbon –zinc) batteries. Do
not use rechargeable (nickel –cadmium) batteries.
17 SANCTUARY SERIES E-LOCK SECURITY CODE SETUP
IMPORTANT: It is necessary to re-program your safe with a new security code
you have personally selected to provide maximum household security.
BE CAREFUL IN CHOOSING YOUR SECURITY CODE. YOU’LL WANT TO BE SURE
THAT YOU CAN OPERATE THE UNIT QUICKLY WITHOUT MAKING AN ENTRY
ERROR.
1. To program your new security code, press the [ 0] button six times followed by
the [ *] symbol. Two beeps indicate that the entry is valid.
2. Key in the preset factory code [ 1 5 9 # ]. The yellow light on the E-lock will
illuminate so that you can enter your new code. You can only enter a new
code while the yellow light is on. (If you are changing the code, enter the last
security code used)
3. Enter your new 3 to 8 digit security code followed by the [ *] symbol. One
beep indicates that the entry is valid.
4. Re-enter your new 3 to 8 digit security code followed by the [ *] symbol. Two
beeps indicated that the entry is valid.
5. Confirm your newly entered security code by entering the 3-8 digit code
followed by the [ #]. If successful you will hear two beeps and the green light
illuminates.
6. DO NOT shut the safe door until you have confirmed your new security code at
least 3 times to insure the code has been saved and you can lock and unlock
the door successfully.
7. If the code fails, you will hear three beeps. Repeat the steps above until
successful.
IMPORTANT: If the incorrect security code is entered 3 times you will have an
automatic lockout for 20 seconds before you can try your code again. If 3
additional failed attempts are made, the keypad will lockout for 10 minutes.
18 SANCTUARY SERIES E-LOCK QUIET MODE
1. To mute the E-Lock, enter the code [ * 6 3 3 ]
2. To turn the sound back on, enter code [ * 6 6 ]

OM_GS_0218 www.sportsafieldsafes.com 15
19 SANCTUARY SERIES RESETTING TO FACTORY PRESETS
In the event you have forgotten the security code you will need to contact the
Sports Afield customer service team to retrieve your safes unique reset code. This
code will reset the safe so a new security code can be programmed.
1. To reset to factory presets, press the [ 0] button six times followed by the [ *]
symbol. Two beeps indicate that the entry is valid.
2. Enter your 8 digit reset code followed by the [ # ] symbol. Two beeps indicate
that the entry is valid.
3. The yellow light on the E-lock will illuminate so that you can enter your new
code. You can only enter a new code while the yellow light is on.
4. Enter your new 3 to 8 digit security code followed by the [ *] symbol. One
beep indicates that the entry is valid.
5. Re-enter your new 3 to 8 digit security code followed by the [ *] symbol. Two
beeps indicated that the entry is valid.
6. Confirm your newly entered security code by entering the 3 to 8 digit code
followed by the [ #] symbol. If successful you will hear two beeps and the
green light illuminates.
7. If the code fails, you will hear three beeps. Repeat the steps above until
successful.
20 ANTI THEFT ALERT ALARM SYSTEM
FOR SPORTS AFIELD MODELS LISTED BELOW, INCLUDING THE HAVEN, PRESERVE,
TAC LZ, JOURNEY, & SANCTUARY SERIES SAFES
SA5925H
SA5930H
SA5942h
SA5520P
SA5924P
SA5932P
SA5932PG
SA5940P
SA5940PG
SA7240P
SA5520LZ
SA6033LZ
SA5516J
SA5520J
SA5524J
SA3525S
SA5936S
SA20
SA24
SA36
SA48
SA48GLOSS
SA64
SA80
SA6040W
3B5942H
By activating the theft alert alarm system, if the safe is tampered with, the alarm
will sound for 20 seconds. To stop the alarm from sounding, enter your security
code or use the override key to open the safe and remove the batteries.
1. To activate, Press [ * 0 0 ] to active the theft alert alarm system.
2. Every time a correct security code is entered the alarm is de-activated. To re-
active press [ * 0 0 ].

OM_GS_0218 www.sportsafieldsafes.com 16
MOVING AND SECURING
21 SHIPPING SKID REMOVAL
WARNING: WHILE REMOVING THE BOLTS FROM THE SKIDS, BE SURE TO HAVE A
PERSON HOLD AND STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING
INJURY, AND/OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.
WARNING: BEFORE REMOVING THE SHIPPING SKIDS, MAKE SURE THE DOOR IS
CLOSED AND LOCKED. THE DOOR OF YOUR SAFE IS HEAVY AND PRESENTS A
SAFETY HAZARD UNTIL THE SAFE IS BOLTED DOWN OR SECURED PROPERLY.
1. Upon receiving your safe, you may find it attached to a shipping skid. The skid
is secured from the underside of the safe by four bolts. Remove the four bolts
that secure the safe to the skids using a wrench or 11/16” (17mm) socket.
2. With a person stabilizing the safe, carefully tilt the safe to the left, and pull the
shipping skid on the right away from bottom of the safe.
3. With the shipping skid removed from one side of the safe, carefully lower the
safe to the floor.
4. Follow the same procedure to remove the remaining shipping skid.
FOR SPORTS AFIELD MAXIMUM SECURITY SERIES SAFES (see page 8 for specific model
numbers)
1. Upon receiving your safe, you may find it attached to a shipping skid. The skid
is secured from the inside of the safe by four lag bolts.
2. Open your gun safe door and locate and remove the four black caps on the safe
floor. Remove the four bolts that secure the safe to the skids using a wrench or
9/16” (14mm) socket. Replace the four black caps.
3. Next, close the door and extend the locking bolts by rotating the handle
counter-clockwise. Ensure the door is properly locked before proceeding.
4. With assistance, slide the safe to one side of the pallet so the safe over hangs
the far edge of the pallet. Carefully, tilt the safe over until the bottom side of
the safe touches the floor. Then tilt the safe a little more to allow the pallet to
be removed from underneath the safe.
5. Gently lower the safe back in place.

OM_GS_0218 www.sportsafieldsafes.com 17
22 MOVING YOUR SAFE
WARNING: SAFES ARE VERY HEAVY AND AWKWARD TO HANDLE. PLEASE USE
THE UTMOST CARE IN MOVING THE SAFE. UTILIZING A TRAINED PROFESSIONAL
WITH PROPER MOVING EQUIPMENT IS HIGHLY RECOMMENDED.
The location of the gun safe is very important and the utmost care should be taken
during this consideration.
1. To maximize the fire protection of your safe, we recommend you place the safe
in lower levels in your home where fire temperatures are lower and away from
highly combustible materials.
2. To maximize burglary protection and stability, securing the safe to the floor is
recommended.
3. To maximize household safety, we recommend placing your safe in an isolated
area out of the reach and sight of children.
Using a dolly capable of supporting the size and weight of your safe, move the safe
to your desired location. Please take all necessary precautions to protect and
prevent any damage to your flooring.
HELPFUL: TO DETERMINE WHETHER YOUR SAFE WILL MAKE IT THROUGH
DOORWAYS, STAIRS OR CORNERS TAKE THE EMPTY SAFE BOX AND SEE IF IT WILL
FIT ALL THE WAY THROUGH TO ITS FINAL LOCATION.
1. The safe should be installed adjacent to a side wall with minimal space on
either side of the safe. Wherever possible, the safe should be flat against the
wall and floor. Remove the baseboard and/or wall trim if necessary.
2. Proximity and location of electrical outlets should be considered when
installing powered gun safes.
3. Always ensure the safe is in an isolated and dry area. Never place the safe in
direct contact with a wet floor. When installing your safe on a concrete floor,
use of a moisture/protective barrier is highly recommended. Failure to do so,
or exposing the safe to chemicals or other adverse environments, may void the
warranty.
4. If your safe seems unlevel, you may need to shim the bottom of the safe to
prevent the door from swinging open too quickly, or closing on itself.

OM_GS_0218 www.sportsafieldsafes.com 18
23 SECURING YOUR SAFE
WARNING: YOUR SAFE IS DESIGNED TO SUPPORT ITSELF WHEN THE DOOR IS
OPENED. HOWEVER, CAUTION SHOULD BE USED TO AVOID TIPPING AND SAFETY
HAZARDS. THE SAFE MUST BE SECURED TO THE FLOOR. FAILURE TO DO SO WILL
COMPROMISE THE SAFETY AND SECURITY OF THE SAFE.
FOR SPORTS AFIELD HAVEN, PRESEVER, TAC LZ, JOURENY & SANCTUARY SERIES
SAFES (see pages 7 & 8 for specific model numbers)
TOOLS NEEDED TO BOLT SAFE TO A CONCRETE SURFACE
DRILL / HAMMER DRILL
DRILL BIT –1/2” ( for installing into concrete with provided hardware)
WRENCH / 11/16” (17MM) SOCKET
HAMMER
1. Use the hardware provided or consult your hardware retailer for fastening
hardware for your particular mounting surface.
2. Open your gun safe door and locate and remove the four black caps on the safe
floor. This will provide access to the factory drilled bolt down holes.
3. To secure your safe to the floor it will first be necessary to drill pilot holes in
the floor surface.
4. Drill the appropriate diameter and depth of pilot holes based on the type of
hardware being used and the type of floor surface. For the hardware provided
(concrete floor installation) we recommend using a hammer drill and 1/2”
concrete drill bit to drill holes the four corresponding holes in the concrete
floor.
5. Insert and drive the plastic anchoring plugs into the pilot holes. You may need
to use a hammer to fully insert the plugs into the pilot holes.
6. Secure the safe, by threading all 4 anchor bolts through the factory drilled bolt
down holes in the bottom of the safe and ratcheting down tight.
Make sure the metal washer sits on top of the rubber washer.
Tighten the bolt to compress the rubber washer between the safe
and metal washer. Failure to do so, will allow water to enter the safe
in the event of a flood.
Journey series safes will not include rubber washers.
7. Replace the four black caps onto the floor of the safe.
The SPORTS AFIELD MAXIMUM SECURITY SERIES SAFES (see page 8 for specific
model numbers) do not come with hardware. Consult your local hardware
retailer for fastening hardware specific to your mounting surface and location.
Follow the same steps above adjusting the drill diameter and depth of pilot hole
based on the selected fastening hardware.

OM_GS_0218 www.sportsafieldsafes.com 19
USE AND MAINTENANCE
24 LOADING YOUR SAFE
1. When loading guns into your safe, make sure they rest securely against the
cutouts provided in the gun racks to prevent accidental tipping when the door
is closed.
2. Store documents or heat sensitive items in the bottom of the safe for greatest
protection against fire damage.
3. Store ammunition separately from valuables.
4. Do not put anything in your safe that will put pressure against the door when it
is closed.
5. Select safe models have reinforced shelving but as a good safety precaution
store heavier items either on the floor of the safe or away from the middle of
the shelves.
25 KEEPING SAFE DRY
We recommend placing a moisture/protective barrier between your safe and
concrete floor to prevent any moisture, mildew and rust damage the safe.
Installing your safe in a place with climate control (heat in the winter and cooling in
the summer) is highly recommended. In areas of high humidity or frequent
temperature fluctuations (garages) it is recommend to take appropriate
precautions to ward against moisture damage. We strongly encourage the use an
internal dehumidifier and/or desiccants to protect your contents from rust or
mildew. Internal dehumidifiers should not be in direct contact with the side or back
walls.
26 HINGES AND INTERNAL MECHANISM
The hinges and internal locking mechanism are permanently lubricated, thus
needing no maintenance. Opening the door panel of your safe may void your
warranty. Always consult our customer service experts prior to doing so.