SPORTS AFIELD SA-HD2 User manual

072921
QUICK ACCESS SECURITY VAULTS
INSTRUCTION MANUAL FOR SA-HD2 & SA-HD3

IMPORTANT INFORMATION ............................................................................................... 2
1. REGISTRATION ................................................................................................................ 3
2. UNDERSTANDING YOUR VAULT ...................................................................................... 4
3. INITIAL ENTRY.................................................................................................................. 5
4. BATTERY INSTALLATION................................................................................................. 6
5. ELECTRONIC LOCK SECURITY CODE SETUP ...................................................................... 6
6. LOW BATTERY WARNING ................................................................................................7
7. SILENT ENTRY MODE ....................................................................................................... 7
8. LOCKED OUT OF YOUR VAULT ........................................................................................ 7
9. LOCK OUT MODE / TAMPER PROTECTION...................................................................... 7
10. PROPER PLACEMENT AND MOVING OF VAULT ............................................................. 8
11. SECURING YOUR VAULT ................................................................................................ 8
12. LOADING YOUR VAULT .................................................................................................10
13. MAINTAINING HINGES AND INTERNAL MECHANISMS ................................................10
WARRANTY ........................................................................................................................11
1
www.saproducts.com
TABLE OF CONTENTS

2
DISCLAIMER - READ BEFORE VAULT SETUP
WEAPON STORAGE
Thank you for choosing a Sports Afield vault to protect your valuables. We are
commied to securing, organizing and protecng your most important documents,
valuables and keepsakes.
If you experience problems or challenges with your vault, please contact us.
Many issues can be quickly resolved without the product being returned.
If you choose to ulize this vault to store a firearm always follow proper firearm and
local laws when storing a firearm.
SA Consumer Products strongly recommends that you do not store loaded firearms.
Always follow the firearm safety rules set out by the firearm’s manufacturer.
A Sports Afield vault or any other firearm storage device cannot take the place
of other safety procedures including advising children of the dangers of firearms.
SA Consumer Products and its distributors of the Sports Afield vaults do not
recommend, suggest, advise, promote, or otherwise condone the ownership or use
of firearms. We believe the decision to own or use a firearm is a serious decision
that should only be made by an adult who has carefully considered the risks and
benefits of such a decision.
PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR
SPORTS AFIELD VAULT.
DO NOT LOCK THIS MANUAL OR THE OVERRIDE ACCESS KEYS IN YOUR VAULT.
Contact Customer Service at [email protected] or [phone]
SAFETY
Be sure to keep backup keys stored in a safe place away from unauthorized users
Do not put anything in your vault that will put pressure against the door when it is
closed

3
Theinformaon you record onto this page will be required in the event you cannot
access thecontents of your Sports Afield Vault. Pleasefill out all therequired
informaon below and retain for your records and safe keeping.
PLEASE HAVE THIS INFORMATION READY PRIOR TO CALLING FOR TECHNICAL
ASSISTANCE AT:
PURCHASE DATE:
PPURCHASE PRICE (BEFORE TAX):
MODEL NUMBER:
SERIAL NUMBER:
1. REGISTRATION
RETAILER NAME:
Contact Customer Service at [email protected] or [phone]
KEY NUMBER (IF APPLICABLE):
REGISTRATION FORM
Register your vault at www.saproducts.com
By registering your Sports Afield vault we will be able to expedite and address
any problems or challenges you may have which would otherwiserequirea
notary leer and proof of payment.

1
2
3
4
2. UNDERSTANDING YOUR VAULT
SPRING
LOADED DOOR
SECURITY
CABLE
ELECTRONIC
TOUCH PAD
REMOVABLE SHELF
(SA-HD3 ONLY)
4
KEY OVERRIDE ENTRY
(UNDERNEATH KEY COVER)
BATTERY
COMPARTMENT
RESET
BUTTON
RESET
BUTTON MUTE
BATTERY
COMPARTMENT
OPEN
TOP INSIDE OF THE VAULT
MUTE

1.
3. The spring loaded door will
drop open and you now have
access to your vault.
WARNING: BE SURE NOT TO
PLACE VALUABLES OR HANDS
IN FRONT OF DOOR AS THE
FORCE OF THE DOOR OPENING
DOWNWARD COULD CAUSE
DAMAGE OR INJURY.
3. INITIAL ENTRY
Step 1
Step 2
Step 3
2. Turn the key counter-clockwise
to unlock your vaul
t.
1
2
3
4
Backup
Key Slot
1
2
3
4
Locate the override key
aached to the product
packaging. Remove the
override key cover carefully
by placing a flat end screw
driver into the slot and pry
it upwards.
5

4. BATTERY INSTALLATION
Step 1
1.
5. ELECTRONIC LOCK SECURITY CODE SETUP
Locate the baery compartment
on the inside of the door panel.
Insert the baeries in the proper
orientaon and order. Touch pad
will beep when baeries are
successfully installed.
1.
2.
3.
6
WARNING: Thebaery must be inserted with the correct polarity. Exhausted baery
must beremoved from theproduct and discarded safely. Do not use rechargeable
(nickel – cadmium) baeries.
Steps 1 & 2
Push the reset buon, you will
hear two beeps and the green
light will flash two mes. Input
your 3-8 digit code.
Once complete push the reset
buon to lock in your new code.
Once set up is complete, remove
keys and replace baery cover.
9V BATTERY
RESET
BUTTON
2. Remove protecve film
on keypad.
Step 2

Contact Customer Service at [email protected] or [phone]
8. LOCKED OUT OF YOUR VAULT
In the event you have forgoen thesecurity codeyou will need to use
your backup keys to gain access to your vault. Follow the E-Lock Security
Setup Code instrucons.
If you have lost your backup keys, you will need to contact customer service at the
number below. Proof of purchase is required to obtain keys.
6. LOW BATTERY WARNING
7. SILENT ENTRY MODE
1
2
3
4
Red = Low Baery
7
9. LOCKOUT MODE / TAMPER PROTECTION
By acvang the Silent Entry Mode, the
vault will no longer make audible sound.
With your safe open, locate the two
buons on the inside and top of your
safe. Hold the right buon for at least
three seconds unl the green light flashes
2 mes and the Silent Entry Mode will be
acvated. To reacvate sound, hold the
right buon for at least three seconds,
unl the vault beeps 2 mes and the
green light flashes 2 mes.
This E-Lock is equipped to alert you when the
baeries are low by illuminang the red light
(center) on the touch pad.
Always test the baeries when installing or replacing.
If the red light comes on when a buon is pressed
you know the baeries are not fully charged.
MUTE
1. Three consecuve incorrect code entries will
put the vault in “Basic Lockout” mode. Touch
pad is deacvated for 30 seconds.
2. Aer “Basic Lockout” mode has ended, another
three consecuve incorrect code entries will result
in “Severe Lockout” mode. Touch pad is deacvated
for 5-minutes.

1. To maximize burglary protecon and stability,securing the vault to thefloor or
wall stud is recommended.
2.
3. Always ensurethevault is in an isolated and dry area. Never place the vault in
direct contact with a wet floor. When installing your vault on a concrete floor,
useof a moisture/protecve barrier is highly recommended. Failureto do so,
or exposing the vault to chemicals or other adverse environments,may void the
warranty.
SA Consumer Products recommends that you storeyour vault in a closet,office,
basement,bedroom or any other locaon that is convenient for you but out of
direct line of sight from prying eyes.
10. PROPER PLACEMENT AND MOVING OF VAULT
8
11. SECURING YOUR VAULT
SECURING YOUR VAULT WITH PROVIDED CABLE
1.
Step 1
Step 2
2.
A security cable is included with
your vault. To secure the cable
around a fixed object, first loop
the cable around the object as
shown in the figure to the right.
Insert the cable’s metal peg end
into the hole on the side of the
vault while sll open.
3. From the inside of the vault, take
the cable clip and push it over the
metal peg unl fully secured. Use
pliers if needed.
Locking the vault with the cable loop inside will secure the cable inside the vault. Check
the loop to ensure their is no way it can be manipulated to be easily removed from the
fixed object before leaving unaended.
SAFE
INSIDE
CABLE
CLIP
INSIDE OFVAULT,
PUSH CLIPOVER
END OFCABLE

9
11. SECURING YOUR VAULT CONTINUED
TOOLS AND HARDWARE NEEDED TO SECURE
VAULT TO A WOOD OR CONCRETE SURFACE:
WASHERS
PADS
LAG BOLTS
ANCHORS
• DRILL/HAMMER DRILL
• 3/16" DRILL BIT
(FOR WOOD INSTALLATION)
• 1/2” SOCKET WRENCH
• 4 STEEL LAG BOLTS (NOT INCLUDED) - SIZE 1/4" X 1.50" TO 2.0" LONG
• 4 STEEL WASHERS (NOT INCLUDED) - 1/4"
• 4 PLASTIC ANCHORS (NOT INCLUDED) - SIZE #10-12 X 1.5" TO 1.75" LONG
(FOR CONCRETE INSTALLATION)
• 4 PADS (INCLUDED)
Use the recommended hardware or consult your hardware retailer for fastening
hardware for your parcular mounng surface.
Open the vault door to provide access to the factory drilled bolt down holes that
are located under the protecve foam liner.
To secure your vault to the floor, it will first be necessary to mark and drill pilot
holes in the floor surface.
Drill the appropriate diameter and depth of pilot holes based on the type of
hardware being used and the type of floor surface. We recommend using a hammer
drill and a concrete drill bit to drill the four corresponding holes in the mounng
surface.
Secure the vault by threading anchor bolts through the factory drilled bolt down
holes in the vault and screw down ght with a ratchet wrench.
BOLT
WASHER
VAULT
FLOOR
MOUNTING
SURFACE
ANCHOR
FOR CONCRETE
INSTALLATION

10
13. MAINTAINING HINGES AND INTERNAL MECHANISMS
The hinges and internal locking mechanism are permanently lubricated, thus
needing no maintenance. Opening the door panel of your vault may void your
warranty. Always consult our customer service experts prior to doing so.
12. LOADING YOUR VAULT
1.
2.
Store ammunion separately from valuables.
Do not put anything in your vault that will put pressure against the door when
it is closed.

SA Consumer Products will repair or replace, at their sole discreon,
any Sports Afield vault damaged by fire, forced entry, forced aack
or natural flood for the lifeme of the original owner.
SA Consumer Products will repair or replace, at their sole discreon,
any Sports Afield vault with defecve parts, paint or lock for three
years of the original owner purchase date.
If SA Consumer Products deems a replacement vault is to be sent,
they will pay the freight costs to ship the replacement vault to the
original owner.
This three year warranty is limited to the vault and expressly
excludes any loss associated with the contents of the vault.
SA Consumer Products
reserves the right to receive full evidence
of your misfortune, such as a police report and/or homeowner’s
statement of coverage. This warranty is not valid outside of the
United States and Canada.
Proof of registraon and copy of sales receipt must be on file at
the me of claim. Visit our website at www.saproducts.com to
register your vault.
Three year warranty only applies to the original owner of the vault.
SA Consumer Products shall only be responsible and liable when the
vault is used in compliance with the direcons specified in your new
SA Consumer Products owner’s manual.
SA Consumer Products
requires that specific guidelines be
followed for repair. The vault will be repaired in-home if possible
(to include parts and labor); however, if factory replacement
is necessary (at
SA Consumer Products ’ sole discreon), the
replacement will be shipped freight prepaid, curbside delivery.
This warranty is inclusive and is in lieu of any and all other
warranes, express or implied. Specifically excluded are the
warranes of merchantability and fitness for a parcular purpose.
This warranty is limited to the vault itself and/or its value and
does not include consequenal damages of any kind including,
but not limited to, the contents in and of the vault.
11