SSS Siedle SET CVSG 850-1 Guide

SNG 850-…
SG 150-… Router
BCV 850-1
/
BCVU850-1
ANG 600-…
LAN
1 The kit is installed and ready for commissioning
ON
2 Activate programming mode on the set line rectier 3 Activate programming mode on the door station
mLink
In-Home
Status
Reset
Prog.
ON
4 Activate programming mode on the SmartGateway 5 Press the call button on the door station
OFF
6 End the programming mode on the set line rectier
Commissioning brief instructions:In-Home bus
In-Home bus
Power supply
SNG850-…
User
smartphone
1sec.
4sec.
4sec.
4sec.
1sec.
SNG850-…
SG150-…
© 2019/02.20 Printed in Germany Best.-Nr. 210009854-00EN
SET CVSG 850-1
SET CVUSG 850-1
Commissioning
SmartGateway
starterkit

8 Call up the determined IP address of the SG150-… in the browser
9 Login (username:admin/password:admin)
Remember to change the standard password! (User> Changepassword)
10 Under “IP user”, “Create an IP user”
Menu path: Network user> IP user
11 Select “SiedleApp”, ll out the data and click “Next”
Name: Freely selectable name for the user (e.g. Julia)
Bus address reference: Connection between the SiedleApp and the door station (e.g. [01 …])
12 Install the SiedleApp on the user’s smartphone
Türruf
9:41 AM 100%
14 Check app functions13 Scan the QR code with the SiedleApp
If the user cannot be reached, print the QR code as a PDF and/or send it to the user for
later.
Individual
QRcode of
the user
7 Determine the IP address of the SmartGateway SG150-… in the network (router)
SG150-… Router/Switch
Commissioning brief instructions:SiedleApp