stilum vola 2 User manual

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
Mounting instructions for swing „vola 2“
Item No. 51 2023 402
State: 12.07.2016 p. 1
Diagram 1: Overall view of the play equipment

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
Mounting instructions for swing „vola 2“
Item No. 51 2023 402
State: 12.07.2016 p. 2
Play level
1. Select the play equipment location in consideration of the required safety
area (see Diagram 3: 3000 x 7100mm).
2. The impact area of a playground equipment with an enforced movement is
not allowed to overlap the impact area of other equipment.
Regarding to DIN 1176 - 4.2.8.2.5, impact absorbing surfaces have to be put
under the whole impact area of every equipment with an enforced movement.
3. Carry out excavation work for 4 foundations as shown in Diagram 2 and 3.
After excavation, compress the foundation oor.
Note: The swing is built in on the play level. Pay attention to items marked
„game level“ of play equipment!
4. Set up the concrete foundations acc. to the dimensions indicated (LxWxH
800 x 600 x 500 mm) with central, horizontal reinforcement (BST 500 S) in
the quality class C 20/25. Place the mounted swing into the foundations acc.
to the dimensions indicated in Diagram 2 and 3.Compress concrete!
Reinforcement plan: Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C 20/25
Diagram 2: Foundation plan with dimension details „vola 2“
450
500
402
800 800
600
94
1367
2126
2314
150
250
Freie Fallhöhe ≤ 1200mm
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
06.04.2016
Abmaße:
Fertigung:
Behnke
-
Gewicht:
Fundamentplan
vola2
0120-00-00
450
500
402
800 800
600
94
1367
2126
2314
150
250
Freie Fallhöhe ≤ 1200mm
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
06.04.2016
Abmaße:
Fertigung:
Behnke
-
Gewicht:
Fundamentplan
vola2
0120-00-00

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
Mounting instructions for swing „vola 2“
Item No. 51 2023 402
State: 12.07.2016 p. 3
Diagram 3: Top view „vola 2“ Size of the minimum space = safety area
The dimensions of the sketches relating to the use of natural
surfaces with impact-absorbing effect.
When using synthetic safety tiles
will reduce the impact surface in the direction of swing
by 500 mm. The minimum space remains
preserved in its entirety.
5. After a setting period of 10-14 days, depending on weather conditions and
foundation size, clean the surface of the foundation, put the play equipment
on the foundation and screw it with the anchor bolts included in the delivery.
6. Fill up and compress the holes between the foundation and the foundation
hole with the excavation.
7. Seal the foundation with the safety cover required for the height of fall indica-
ted. Set up impact-absorbing playground surfacing according to EN 1177 HIC
1000.
Critical drop height: 1100 mm
Recommended surface material: sand, wood chips, gravel, synth. fall protec-
tion.
8. Screw the chains with the swing seats onto the swing suspension. Readjust
the screws on the swing bars.
9. Do not allow children to use the equipment before the installation has been
nished.
7100
3000
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
06.04.2016
Abmaße:
Fertigung:
Behnke
-
Gewicht:
Draufsicht
0120-00-00
vola2

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
Mounting instructions for swing „vola 2“
Item No. 51 2023 402
State: 12.07.2016 p. 4
Attention: If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to par-
ticular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
NOTE: Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are ne with an abrasive
(240 grit) to remove.
Please take care when transporting and setting up the fact that the components
are made of stainless steel with no „normal“ steel parts in contact.In order to pre-
serve a good visual appearance of your stilum playground equipment over a long
period one should take care of maintenance of the stainless surface even despite
of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently clea-
ned from dirt and deposits due to air pollution and dirt caused by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner
(e.g. on phosphoric acid) and rinse off with clear water after a short application
time. During cleaning with mild abrasive components, only wipe over stainless
steel surface in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on
cars) or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g.
ethyl alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the
surface again.
Do not use any chlorid or hydrochloric containing cleaning products nor scou-
ring powder, bleaching - or silver polish cleaner. Cleaning intervals depend on
type and degree of soiling as well as on demands made on optical characte-
ristics. Therefore cleaning is advisable at intervals of six to twelve months –
whereby in the case of strong soiling it is appropriate to clean the playground
equipment at intervals of 3 to six months.