Suncast MBC3450 User manual

AJ Door Panel B] Right Side Panel Bjj Left Side Panel Back Panel Top Panel
0630085 1 Pc 0630086 1 Pc 0630087 1 PCS 0630088 1 Pc 0630061
Shelf Bottom Panel or Handle
Do j Magnet LI Adjustable Foot
0630081 2 c 0630060 1 c 0630084 1 cs 0630050 1 cs 0630006 4 cs
#10 - 24 Nut Lock Washer 5] Padlock Bracket M I #4 x 1/2 AB
Truss Head
(1/8" -24 x 1/2')
&NJ 10-24 x 11/8"
Truss Head
(3/16" -24 x 1 1/8')
£
0630051 4 cs 0630053 4 Pcs 0630049 1 cs 0630054 2 cs 0630052 4 cs
011/4" - 20 x 1 1/4"
Button Head J 1/4" - 20 x 1/2"
Button Head
0. QJ 5/32" Wrench 3/8" Combination
Wrench S_j #8 X 18 x1/2
Truss Head
(5/32 - 16 x 5/16)
0630007 12 cs 0630031 8 cs 0630006 1 c 0630008 1 c 0630022 4 PCS
2004 Suncast Corporation Patents Pending 0660010
OWNER'S MANUAL ________ MBC3450
STORAGE TRENDS METAL
BASE CABINET WITH TWO SHELVES
IMPORTANT:
Follow Instructions listed below in the proper sequence as numbered
to assure fast, easy and correct assembly. This product contains
parts that can be damaged if incorrectly assembled
Before assembling, please count your parts and hardware as listed
below.
Do not fully tighten screws until the product is fully assembled.
For
/ Information on
fSuncast products
(replacement parts see
www.suncast.com
REPLACEMENT PARTS ORDERING INSTRUCTIONS:
Call Suncast for pricing information. Call 800-846-2345 or 630-879-2050.
Monday-Friday 8:OOam-4:3Opm Central Time (expect holidays). Or see
www.suncast.com

1. Attach Top Panel (D)to Side
Panels (BL & BR), using Screws (0
and 5).
2. Attach Bottom Panel (F) to Side
Panels (BL & BR) using Screws (0).
3. Attach Shelf (E) to Side Panels
(BL & BR), using Screws (P).
4. Install Back Panel (C) in rear of unit,,
using Screw (0).
5. Attach Padlock Bracket (L) to the Left
Side Panel (BL), using Screw (N),
Washer (K), and Nut (J).
6. Place the Magnet (H) on Left Side Panel
(BL), and attach with Screw (M).
0660010
I — —
-% 0
BR'0

7. Align Door Handle with Locking Tab (G) with
holes in the middle of Door Panel (A). Attach Door
Handle with Locking Tab (G) with Screw (N), Lock
Washer (K) and Nut (J).
8. Screw Feet (I) into holes in legs of unit. Adjust
as necessary to level unit.
9. Align top and bottom hinges of Door (A) with top
and bottom hinge receptacles on unit. Slide Door
down to engage hinges.
J
J
0660010
N
II