Suncast MSR25 User manual

ASSEMBLY INSTRUCTIONS'IIIIIIIII"
MSR25
METAL SPORTS RACK
Warning: This product is intended for storage of
lightweight sports equipment. Not for use as a toy.
Assemble to Suncast Slat Wall
Parts Included:
1. Slide the open end of first Cross Tube B through inside cylinder of left Side Bracket A. Slide the open end of second Cross Tube
B through outside cylinder of left Side Bracket A. Slide the open end of first Cross Tube Mate C through inside cylinder of right
Side Bracket A. Slide the open end of second Cross Tube Mate C through outside cylinder of right Side Bracket A. Refer to Figure
laand lb.
© 2005 Suncast Corporation, Batavia, IL 0660024
Side Bracket
2PCS
Cross Tube
2PCS
Cross Tube Mate
2PCS
P1 Basket Left Side
1Pc
I1 Basket Right Side
lPc
I!1 Basket Back and Bottom Skate/Helmet Hook
1Pc 2 Pc
BC
IDA
Insert Cross Tubes B and C through cylinders of
Side Brackets A
A/Inside cylinder location
of Side Brackets A
Outside cylinder loca-
tion of Side Brackets A

2. Join male and female ends of Cross Tubes B and C together
in between the two Side Brackets A; making sure that the but-
ton of Cross Tube C protrudes through the hole in Cross Tube B.
After the Cross Tubes are joined, the two Side Brackets A
should be spaced approximately 26" apart, measuring from
center to center of each Bracket.
3. Slide Brackets of Assembly up into Slat Wall groove holding
brackets upward at 450 angle to Slat Wall as shown. Bring
Side Brackets down pushing bottom edges of Brackets and
brace arm into grooves of Slat Wall until flush against back of
Slat Wall grooves.
Refer to Figure 3a, 3b and 3c.
4. Basket Assembly
Attach Basket Left Side D to Basket Back and Bottom
F by inserting pegs of Back and Boffom F through
loops of Left Side D as shown in Figure 4a, 4b and 4c.
Attach Basket Right Side E to Basket Back and Bottom
F in the same manner. Refer to Figure 4d.
AA
D
Cross Tubes B and C joined together in between
Side Brackets A.
Buffon
Side Bracket positioned at 45°
angle to Slat Wall
Slide Brackets into groove while holding upward at 45°
angle to Slat Wall
Assembly of Basket Left Side D, Right Side E and Back and Bottom F
E

5. Hang assembled Basket onto Cross Tubes and
snap down onto Tubes as shown.
6. Hang Skate/Helmet Hooks G onto Cross Tubes as
shown.

Name
Street
State
Phone
MSR25
Index No. Part Name (Quantity Provided) Part No Cost Each Qty. Ord. Total Cost
A_____________ SIDE BRACKET (2) 0630251
B____________ CROSSTIJBE(2) 0630252
C___________ CROSSTIJBE MATE (2) 0630253
D____________ BASKET LEFT SIDE (1) 0630256
F______________ BASKET RIGHT SIDE (1) 0630257
F_____________ BASKET BACK AND BO1TOM (1) 0630258
G______________ SKATE/HELMET HOOK )2)
CROSS TUBE END CAP (4
0630255
U63U24 IL R
SI
SUB TOTAL:
SIDENTS ADD 6.75%
PPING & HANDLING
CHECK ENCLOSED MONEY ORDER ENCLOSED TOTAL:
Mail To: Suncast Corporation 701 NORTH KIRK ROAD • BATAVIA, IL, USA 60510 Patents Pending
Please provide this information. lace of Purchase
CityZip Code
Date
uality Control number
From Owner's Manual)
Ordering Instructions
1 . Call Suncast for pricing information at 800-846-2345 or 630-879-2050. Monday - Friday
8:00 am - 4:30 pm Central Time. (Except holidays) Or see www.suncast.com
2. Completely fill out address. Print Clearly.
3. Add Shipping and Handling to Total Cost. (Illinois residenls add 6.75% sales fax.)
4. Send complete form with check or money order to Suncast Corp., 701 N. Kirk Rd.,
Batavia, IL 60510
5. No COD. Orders will be accepted.
For
information on
icast products and
replacement parts see
www.suncast.com
BA
B
C
/D/IIE
C
/F