Suncast MTL6804 User manual

OWNER'S MANUAL (:1111111) MTL6804
STORAGE TRENDS METAL
TALL LOCKER WITH FOUR SHELVES
IMPORTANT:
Follow Instructions listed below in the proper sequence as fl 001 1
numbered to assure fast easy and correct assembly. This product / Information on
contains parts that can Ie damaged if incorrectly assembled / ncast products and\
Before assembling, please count your parts and hardware as Su
listed below. I replacement parts see\
Do not fully tighten screws until the product is fully assembled. I www suncast corn
REPLACEMENT PARTS ORDERING INSTRUCTIONS:
Call Suncast for pricing information. Call 800-846-2345 or 630-879-
2050. Monday-Friday 8:OOam-4:3Opm Central Time (expect holidays).
Or see www.suncast.com
AJ Door Panel B] Right Side Panel Bjj Left Side Panel Back Panel Top Panel
0630078 1 Pc 0630082 1 Pc 0630083 1 PCS 0630080 1 Pc 0630044 1 c
Solid Shelf Bottom Panel Shelf with Corners
0Door Handle
U
LI Magnet
0630167 1 c 0630168 1 c 0630081 3 c 0630084 1 cs 0630050 1 cs
Adjustable Foot #10-24 Nut
t5] Lock Washer MJ Padlock Bracket NJ #4 x 1/2 AB
Truss Head
(1/8" -24 x 112')
0630006 4 cs 0630051 4 cs 0630053 4 i'cs 0630049 1 cs 0630054 2 cs
OJ 10-24 x 1 1/8"
Truss Head
(3fl6"-24x11/8')
J 1/4" -20 x 1 1/4"
Button Head QJ 5/32" Wrench 3/8" Combination
Wrench sJ 1/4" -20 x 1/2"
Button Head
0630052 4 cs 0630007 18 cs 0630006 1 c 0630008 1 c 0630031 12 cs
2004 Suncast Corporation Patents Pending 0660012

1. Attach Top Panel (D) to Side Panels (BL &
BR), using Screw (P).
2. Attach Shelf (E) to Side Panels (BL & BR),
using Screw (P).
3. Attach Bottom Panel (F) to Side Panels (BL
& BR), using Screw (P).
4. Attach Back Panel (C) in rear of unit, using
Screw (P).
5. Attach Padlock Bracket (M) to Left Side
Panel (BL) with Screw (0), Lock Washer (L)
and Nut (K).
6. Place the Magnet (I) on Left Side Panel
(BL), and attach with Screw (N).
0660012
-

8. Align Door Handle (H) with the holes in middle
of Door Panel (A). Attach Door Handle (H) with
Screw (0), Lock Washer (L) & Nut (K).
0660012
7. Place Shelves (G) on brackets connected to
Side Panels (BL & BR). Attach Shelves to brackets
in front corners using Screw (5).
9. Screw Feet (J) into holes on legs of unit.
Adjust as necessary to level unit.
10. Align top and bottom hinge of Door (A)
with top and bottom hinge receptacles on
unit. Slide Door down to engage hinges.