Suncast MSH5005 User manual

SH5OO5
STORAGE TRENDS METAL 5 SHELF STORAGE UNIT
2003 Suncast Corporation Patents Pending 0660002
OWNER'S MANUAL
IMPORTANT:
Follow instructions listed below to assure fast, easy and correct
assembly. This product contains parts that can be damaged if
incorrectly assembled
Before assembling, please count your parts and hardware as
listed below.
Do not fully tighten screws until the product is fully assembled.
>—— >—
>r-- —>1—
>—— >—
REPLACEMENT PARTS ORDERING INSTRUCTIONS:
Call Suncast for pricing information. Call 800-846-2345 or 630-879-
2050. Monday-Friday 8:00am-4:30pm Central Time (except holidays).
Or see www.suncast.com
Aj Right Side Panel Left Side Panel Shelf with logo JShelf Dj Rear Gusset
0630002 1 Pc 0630001 1 Pc 0630003 1 Pc 0630004 4 PCS 0630005 4 PCS
Adjustable Foot Button Head
1/4" 20 X 1 1/4" j Truss Head
#10 -24x 1/2"
(3/16 -24 x 1/2)
5/32" Wrench JJ Truss Head
#8 x 1/2"
(5/32-16 x 112')
0630006 4 cs 0630007 20 cs 0630021 16 cs 0630009 1 c 0630022 20 cs
For
Information on
icast products and
replacement parts see
www.suncast.com

1. Attach Shelf with logo (B) to the Left Side
Panel (AL) and Right Side Panel (AR) in the top
position using screws (G) from the outside of unit
and screws (J) from the inside of unit.
2. Attach shelf (C) to the Left Side Panel (AL) and
Right Side Panel (AR) in the bottom position
using screws (G) from the outside of unit and
screws (J) from the inside of unit.
3. Attach remaining three Shelves (C) to the Left
Side Panel (AL) and Right Side Panel (AR)
frame, using screws (G) from the outside of unit
and screws (H) from the inside of unit. These
shelves may be placed at any of the seven
remaining positions
4. Attach Rear Gusset (D) to unit using screw (H).
5. Screw feet (E) into holes on legs of unit. Adjust
as necessary to level unit.
Ga.
Back of unit
AR
0660002
G
a.
GS.
G
G
Front of unit
' G