Suncast MSB1 840 User manual

e
Flat Head
#6-20 x 1/2"
(118-24x112')
0630020 10 PCS 0630006 6 Pc 0630009 1 c
2003 Suncast corporation Patents Pending 0660005
OWNER'S MANUAL MSB1 840
STORAGE TRENDS METAL SPORTS BENCH
IMPORTANT:
Follow instructions listed below to assure fast, easy and correct
assembly. This product contains parts that can be damaged if
incorrectly assembled
Before assembling, please count your parts and hardware as
listed below.
Do not fully tighten screws until the product is fully assembled.
REPLACEMENT PARTS ORDERING INSTRUCTIONS:
Call Suncast for pricing information. Call 800-846-2345 or 630-879-
2050. Monday-Friday 8:00am-4:30pm Central Time (except holidays).
Or see www.suncast.com
1r1
DJ Bottom Panel
0630023 1 c 0630024 1 c 0630025 1 c 0630026 1 c 0630027 2 c
Square Tube FJ Lid GJ Button Head
1/4" -20 x 1 1/4" H I Truss Head
#8-18 x 5/16"
(5/32- 16x5/16')
Li Truss Head
1/4 -20 x 1/2"
0630028 1 cs 0630029 1 c 0630007 10 cs 0630030 36 cs 0630031 2 cs
KJ Adjustable Foot 5/32" Wrench
For
Information on
icast products
replacement parts see
www.suncast.com

1. Attach Square Tube (E) to Right & Left
Bottom Panel (D), using (H) screw.
2. Attach Side Panels (CL) &
(CR) to Bottom Panel (D),
using screws (G).
3. Attach Back Panel (B) &
Front Panel (A) to the
Bottom Panel (D) as shown,
using screw (H).
4. Screw Feet (K) into holes in legs of
body assembly. Adjust as necessary to
level.
5. Fasten cover (F) to Back Panel (B),
using screws (J) & (I) as shown.
0660005