Suncast M5P5750 User manual

OWNER'S MANUAL M5P5750
STORAGE TRENDS SPORTS ORGANIZER
For
Information on
Suncast products and
replacement parts see
www.suncast.com
2003 Suncast Corporation Patents Pending 0660001
IMPORTANT:
Follow Instructions listed below in the proper sequence as
numbered to assure fast, easy and correct assembly. This product
contains parts that can be damaged if incorrectly assembled
Before assembling, please count your parts and hardware as
listed below.
Do not fully tighten screws until the product is fully assembled.
REPLACEMENT PARTS ORDERING INSTRUCTIONS:
Call Suncast for pricing information. Call 800-846-2345 or 630-879-
2050. Monday-Friday 8:00am-4:30pm Central Time (except holidays).
Or see www.suncast.com
Right Side Frame Left Side Frame Round Tube j Square Tube Square Tube
with Holes
0630010 1 PC 0630011 1 PC 0630012 4PCS 0630013 2PCS 0630032 1 PC
Drawer Slide
Frame FJ RightDrawer Slide Left Drawer Slide Metal Rack Metal Basket
0630014 1 c 0630015 1 c 0630016 1 c 0630017 2 cs 0630018 2 cs
jj Rear Gusset j Canvas Bag j Adjustable Foot MJ #8 x112"
Truss Head
(5/32" - 16 x 1/2')
NJ #8 x 5/8"
Truss Head
(5/32" - 16 x 518')
0630005 2 cs 0630019 2 cs 0630006 4 cs 0630022 8 cs 0630055 4 cs
oJ 1/4" - 20 x 1 1/4" 5/32" Wrench
Button Head 9] Truss Head
(3/16" -24 x 1/2')
0630007 14 cs 0630009 1 c 0630021 8 cs

1. To create Frame Assembly, attach round
tubes (B) to Right and Left Sides (AR) & (AL),
using screw (0) to secure.
2. Attach square tubes (C) to Right and Left
Sides (AR) & (AL), using screw (0) to secure.
3. Making sure the four holes face the back of
unit, attach square tube with holes (D) to Right
and Left Side (AR & AL), using screws (0) to
secure.
3. Attach Rear Gussets (I) to Frame Assembly
with screw (Q).
4. Screw Feet (K) into holes on legs of Frame
Assembly. Adjust as necessary to level unit.
5. Attach Drawer Slides (FL & FR) to Frame
Assembly with screw (M), making sure that the
inner portion of the Drawer Slide can be slid out
the front of the unit.
6. Attach inner portions of Left and Right Drawer
Slides (FL & FR) to Drawer Slide Frame (E) with
screw (M).
0660001
7. Attach Canvas Bag (J) to Drawer Slide Frame
(E), and then insert inner (FL) & (FR) attached to
Drawer Slide Frame to outer (FL) & (FR)
attached to Frame Assembly.
J
8. To secure bottoms of Metal Baskets, insert
Screw (N) and tighten.
J
9. Attach Metal Racks (G) and Metal Baskets (H)
into the holes in Frame Assembly on either side.
:':'i'':1':C
N
N
H
N