Sunjoy A102001602 User manual

ASSEMBLY INSTRUCTION
Item/Article #：A102001602
WE HAVE YOU IN MIND, LET US SERVE YOU!
Nous pensons en vous, laissez nous vous aider!
Questions? Issues?/ Questions? Problèmes?
CONTACT US/ Contactez-nous
[e-mail]
www.sunjoyonline.com
Country of Origin: China
Pais d’origine: Chine
Production Number: XXXXXXXXXX
Numéro de fabrication: XXXXXXXX

This product is intended for domestic outdoor use only.
The product should be placed on flat, horizontal ground.
Ensure enough clearance around the product. Before assembling the product, find level
ground not less than 6' (1.8 m) away from any structures or obstructions, such as fences,
garages, houses, overhanging branches, laundry lines, or electrical wires.
This gazebo is not to be regarded as part of a building/house structure. The gazebo is to be
anchored onto the ground for added safety. Do not assemble the gazebo onto soil/earth
ground. It is best advisable to have the gazebo built onto a wooden deck or concrete ground
for stability. If it is to be build onto a wooden deck/ground, do ensure that the wooden
deck/ground has a strong foundation. It is advisable to use appropriate floor plugs (not
provided) to anchor the gazebo onto the wooden/concrete ground.
Some structures may require two or more people to install safely. Check for underground
utilities before digging or driving stakes into the ground.
During installation, follow all safety warnings provided with your tools, and use safety glasses.
In case you set up more than one gazebo, keep a minimum distance of 10' (3 m) between the
gazebos.
Any assembly or maintenance of the product must be carried out by adults only.
Arrange necessary manpower when assembling or moving the product.
Some parts may contain sharp edges. Wear protective gloves if necessary.
Keep children and pets away while setting up the gazebo.
Check all nuts and bolts periodically to ensure bolts/nuts are tightened.
Repairing and replacing parts should be done by a qualified technician.
This gazebo is intended for decorative and sunshade purposes only, and it is not designed to
withstand harsh weather, including high winds, rain, and snow.
Do not light any fires inside or near the product！
Stay calm if fire breaks out. Search for the nearest exit. Do not return to the gazebo before
firemen allow you to do so.
Do not hang heavy weights on the roof frame.
Do not climb onto the roof of the gazebo. Falling off the gazebo can result in serious injury.
Retain the original packaging to store the gazebo.
Important Safety Instructions
Warning! To reduce the risk of serious injury, read the following safety instructions
before assembling and using the gazebo.
Please check with your local governing authority/local municipal codes regarding
installation of structures before assembly.
Caution!Proper placement of your gazebo is essential.
Do not place the product underneath electrical lines.
Keep children away during assembly.
This product contains small parts which can be swallowed by children.
Keep fingers away from the places where they can be pinched or trapped.
Do not attempt to assemble the gazebo if any parts are missing.
Country of Origin: China
Pais d’origine: Chine
Production Number: XXXXXXXXXX
Numéro de fabrication: XXXXXXXX

•Please read and understand this manual before any assembly. Beforebeginning
assembly of product, make sure all parts are present. Compare parts with packaging
contents list.
•When assembling wooden parts, do not overtorque the bolts to avoid splitting the wood.
See image illustration.
•Place all parts from the box in a cleared area and position themon the floor in front of you.
•Remove all packing materials and place them back into the box. Do not dispose of the
packing materials until assembly is complete.
•Needed for assembly:（The following tools are not included）
IMPORTANT:
Cordless drill Hammer Screwdriver Ladder 4 people
Country of Origin: China
Pais d’origine: Chine
Production Number: XXXXXXXXXX
Numéro de fabrication: XXXXXXXX

Post A 4
Stake slice B 4
Long decorative
groove（left） C1 2
Long decorative
groove（right） C2 2
Short decorative
groove（left）D1 2
Short decorative
groove（right） D2 2
Corner Beam E 4
Middle Beam F 6
Decorative
Groove Connector G 4
Left Slot H1 4
Right Slot H2 4
Middle Slot H3 2
“F”Baffle 1 I1 4
“F”Baffle 2 I2 4
“F”Baffle 3 I3 2
Left Arc
support Bar J1 4
Right Arc
support Bar J2 4
Corner Support P005000482 K 4
Small Roof
Cover P000900122 L 1
Roof connector P000501383 M 1
Hook P005800001 N 1
Post up
connect piece P000501385 O 4
Parts List
Country of Origin: China
Pais d’origine: Chine
Produc�on Number: XXXXXXXXXX
Numéro de fabrica�on: XXXXXXXX
Part NumberDescription QtyLabel Part Image

Corner Cover P005600374 P1 4
Middle Cover P005600379 P2 4
Upper Closure
plate
P005600380 Q1 4
Middle Closure
plate P005600381 Q2 6
Left small PC
board P000700525 R1 4
Left big PC
board P000700527 R2 4
Middle Board P000700529 R3 4
Right small PC
board P000700526 R4 4
Right big PC
board P000700528 R5 4
Netting P001200186 S 1
Hardware Pack 1
H050030001
H030040032
H090010017
Country of Origin: China
Pais d’origine: Chine
Producon Number: XXXXXXXXXX
Numéro de fabricaon: XXXXXXXX
Part NumberDescription QtyLabel Part Image

Fig.4 Attach
assemble for
Fig.5: Attach
decorative grooves(C1、D2) to post(A)from the outside and fix them tightly by bolt(AA),
same grooves(C2&D1)
the Corner Cover(P1) to decorative grooves, and fix tightly by Bolt(DD).
Fig.1:Att ach stake slice(B) on post(A) and fix them tightly by bolt(AA) and Flat washer(BB)
Fig.2: Attach Decorative groove connector(G) to decorative grooves(C1&C2)and fix them tightly by
bolt(AA)and flat was her(BB),same assemble for grooves(D1&D2)
Fig.3:Attach Post(A) to decorative grooves(C1&D1)and fix them tightly by bolt(CC) and flat
washer(BB), same assembl e for grooves(C2&D2)
Fig.6: Attach the Middle Cover (P2) to decorative grooves。and fix tightly by Bolt(DD)
Country of Origin: China
Pais d’origine: Chine
Production Number: XXXXXXXXXX
Numéro de fabrication: XXXXXXXX

BB
H050030001
M6 Flat washer
22PCS
AA
H010110039 M6X20 Bolt
22PCS
Hardware Pack 2
Fig.7: Use bolt(AA)and flat washer(BB) to lock corner support(K) to Groove(C1、C2、D1、D2)
Fig.8: Use Bolt(EE)and washer(BB) to lock support Bar(J1、J2) to decorative groove(C1、C2、D1、D2)and
post(A)
Country of Origin: China
Pais d’origine: Chine
Production Number: XXXXXXXXXX
Numéro de fabrication: XXXXXXXX

BB
H050030001
M6 Flat washer
10PCS
AA
H010110039 M6X20 Bolt
10PCS
Hardware Pack 3
Fig.9: Use Bolt(AA)and washer(BB)to lock Beam(E) to roof connector(M)
Fig.10: Firstly to put post up connect piece(O) on the top of post(A),using bolt(AA)and washer(BB)
to lock the bottom of corner beam(E),post(A)and connect piece(O) together. Lock them tightly.
Fig.11:Use Bolt(AA) and flat washer(BB) to lock middle beam(F) to roof connector(M).
Fig.12: Use Bolt(AA)and washer(BB)to lock the bottom of the middle beam(F) to the decorative groove(C1、C2、D1、D2)
Fig.13: Put small roof cover(L)on roof connector(M)using bolt(AA) and washer(BB),lock tightly. Assemble hook(N) to the
roof connector(M).
Country of Origin: China
Pais d’origine: Chine
Production Number: XXXXXXXXXX
Numéro de fabrication: XXXXXXXX

FF H070010003 Φ8*180mm Stake 12 PCS
Hardware Pack 4
Fig.14: Insert PC board(R3) into the Gazebo top, and then insert middle slot(H3) and another PC board(R3)into the
gazebo top.(Note:”on” side is upper side)
Fig.15: Insert PC board(R1) into the gazebo top, and then insert slot(H1)and PC board(R2) into the gazebo top. The
same method to install the PC board(R4) and PC board(R5)).
Fig.16: Cover the bottom of PC boards with “F” Baffle(I3).(Insert “F” Baffle(I1&I2) in the same way, make sense of
left and right
Fig.17: Insert middle plate(Q2) into the bottom of middle beam(F) by bolt(AA)and washer(BB).
Fig.18: Insert corner plate(Q1) into the bottom of corner beam(E) by bolt(AA) and washer(BB)
Country of Origin: China
Pais d’origine: Chine
Production Number: XXXXXXXXXX
Numéro de fabrication: XXXXXXXX

Fig.19: Use Hook(GG) to attach the netting(S) to the netting tube.
Fig.20: Use the bandage to connect netting(S) to the post(A)
Fig.21: Fix the Gazebo on the ground using stake(FF)
Country of Origin: China
Pais d’origine: Chine
Production Number: XXXXXXXXXX
Numéro de fabrication: XXXXXXXX

11 / 11
Country of Origin: China Production Number: XXXXXXXXXX
Pais d’origine: Chine Numéro de fabrication: XXXXXXXX
 Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it
from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective
coatings are scratched. This is not a defect and thus not covered by the warranty.
 To minimize this condition, we recommend care when assembling & handling the product to prevent scratching
the paint. Should any scratching or damage occur, we recommend immediate touch-up with rust inhibiting paint.
 Surface rust can also be easily removed with a very light application of common cooking oil. If surface oxidation
(rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping on to deck or patio
and caused damaging stains, which may be difficult to remove. This can be prevented if the above-mentioned
measures are taken to keep the product from oxidizing.
 Use damp cloth to wipe off the stains as quickly as possible.
 If necessary, wash with a mild solution of soap and water; rinse thoroughly and dry completely.
 Periodically check and ensure that all bolts are well-tighten during use
Sunjoy Group warrants to the original purchaser that this item is free from defects in workmanship and materials for a
period of 1 year from the date of purchase, provided the item was factory-sealed at the time of purchase and is
maintained with care and used only for personal, residential purposes. Should any manufacturing defect arise within
this warranty period, Sunjoy Group will replace (at our option) any defective merchandise or parts upon proof of
purchase; however, transportation and delivery costs, as well as payments to a third party for assembly or disassembly
of the item, remain the responsibility of the purchaser. A purchaser of an "open box," previously-returned, or
"clearance" item, as well as original purchasers outside of the warranty period, may obtain replacement parts from
Sunjoy Group for products in current production, at nominal cost.
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,
vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of
purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is
non-transferable. Any replacement of warranted items will be in the original style and color, or a similar style and
color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an
implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you
may also have other rights, which vary from state to state.
Care and Maintenance
Limited Manufacturer’s Warranty
Exclusions