Sunny Health & Fitness SF-BH6629 User manual

45 DEGREE HYPEREXTENSION
ROMAN CHAIR
SF-BH6629
USER MANUAL
IMPORTANT! Please retain owner’s manual for maintenance and adjustment
instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL
YOU HAVE CONTACTED US: [e-mail] or 1- 877 - 90SUNNY
(877-907-8669).

1
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using
the equipment. Safe and effective use can only be assured if the equipment is assembled,
maintained, and used properly. It is your responsibility to ensure that all users of the
equipment are informed of all warnings and precautions.
1. Before starting any exercise program you should consult your physician to
determine if you have any medical or physical conditions that could put your
health and safety at risk or prevent you from using the equipment properly. Your
physician’s advice is essential if you are taking any medication that may affect
your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your
health. Stop exercising if you experience any of the following symptoms: pain,
tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness,
dizziness, or feelings of nausea. If you do experience any of these conditions, you
should consult your physician before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for
adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your
floor or carpet. To ensure safety, the equipment should have at least 4 feet (1.2 m)
of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment.
The safety of the equipment can only be maintained if it is regularly examined for
damage and/or wear and tear.
6. Always use the equipment as indicated. If you find any defective components
while assembling or checking the equipment, or if you hear any unusual noises
coming from the equipment during exercise, stop using the equipment
immediately and don’t use the equipment until the problem has beenrectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing
that may become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of theequipment.
9. The maximum weight capacity of this unit is 250 pounds (113 kg).
10.This equipment is not suitable for therapeutic use.
11.Move with caution when lifting and moving the equipment. Always use proper
lifting technique and seek assistance if necessary.
12.Your product is intended for use in cool, dry conditions. Avoid storage in extreme
cold, hot, or damp areas as this may lead to corrosion and other relatedproblems.
13.This equipment is designed for indoor use only! It is not intended for commercial
use!

2
EXPLODED DIAGRAM

3
PARTS LIST
NO.
Description
Spec.
Qty
1
Cushion
1
2
Adjustable Tube
1
3
Right Handle Bar
1
4
Left Handle Bar
1
5
Back Stand Tube
1
6
Back Base Tube
1
7
Front Stand Adjustable Tube
1
8
Front Base Tube
1
9
Leg Support Tube
1
10
Foam Tube
1
11
Foam
2
12
Support Plate
1
A
Hex Bolt
M10x65
2
B
Hex Bolt
M10x70
3
C
Hex Bolt
M10x15
6
D
Hex Bolt
M8x15
4
E
Washer
M10
16
F
Washer
M8
4
G
Nut
M10
5
H
Lock Pin
1
I
Lock Pin
1
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify
the part(s) needed:
The model number (found on cover of manual)
The product name (found on cover ofmanual)
The part number found on the “EXPLODED DIAGRAM” and “PARTS
LIST” (found near the front of the manual)
Please contact us at [e-mail] or 1- 877 -
90SUNNY (877-907-8669).
HARDWARE PACKAGE
A M10x65 2 pcs
F M8 4 pcs
B M10x70 3 pcs
G M10 5 pcs
C M10x15 6 pcs
H 1 pc
D M8x15 4 pcs
I 1 pc
E M10 16 pcs
2 pcs

4
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance
with parts or troubleshooting, please contact us at [e-mail] or
1-877-90SUNNY (877-907-8669).
D M8x15 2 pcs E M10 4 pcs
F M8 2 pcs
G M10 2 pcs
A M10x65 2 pcs
2 pcs
C M10x15 3 pcs
E M10 3 pcs
2 pcs
F
E
D
STEP 1:
Attach the Cushion (No. 1) to the
Adjustable Tube (No. 2), using 2
Hex Bolts (D) and 2 Washers (F).
Attach
Right Handlebar (No. 3)
and Left Handlebar (No. 4) to
Adjustable Tube (No. 2), using 2
Hex Bolts (A), 4 Washers (E) and
2 Nuts (G). Tighten with Spanner
Wrench.
STEP 2:
Insert
Back Stand Tube (No. 5)
into Back Base Tube (No. 6).
Secure using 3 Hex Bolts (C) and 3
Washers (E). Tighten with Spanner
Wrench.

5
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with
parts or troubleshooting, please contact us at [e-mail] or 1-877-
90SUNNY (877-907-8669).
C M10x15 3 pcs
E M10 3 pcs
2 pcs
STEP 3:
Insert
Front Stand Adjustable
Tube (No. 7) into Front Base Tube
(No. 8). Secure using 3 Hex Bolts
(C) and 3 Washers (E). Tighten
with Spanner Wrench.
STEP 4:
Insert Foam Tube (No. 10) through
the hole of the Leg Support Tube
(No. 9). Then put Foams (No. 11)
on both ends of the Foam Tube
(No. 10).

6
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with
parts or troubleshooting, please contact us at [e-mail] or 1-877-
90SUNNY (877-907-8669).
E
E
STEP 5:
Attach Back Stand Tube (No. 5) to
Front Stand Adjustable Tube (No.
7) using Hex Bolt (B), 2 Washers
(E), and Nut (G).
Tighten with
Spanner Wrench.
Insert Lock Pin (H).
Place bench on floor, make sure the
Tubes are level on the floor. Tighten
all the Hex Bolts and Nuts.
Insert Adjustable Tube (2) into
Front Stand Adjustable Tube (No.
7).
Insert Lock Pin (I)
and turn to
tighten.
Attach Leg Support Tube (No. 9)
to
Front Stand Adjustable Tube
(No. 7), using Hex Bolt (B), 4
Washers (E), Support Plate (No.
12), and 2 Nuts (G). Tighten with
Spanner Wrench.
The assembly is complete!

7
TO ADJUST THE CUSHION HEIGHT:
With one hand, turn Lock Pin (I) to loosen and pull on it. With the other hand, move
the adjustable tube to desired height. Insert Lock Pin (I) into one of the five settings
to secure and turn to tighten.
TO FOLD THE BENCH:
Pull out Lock Pin (H). Fold the bench. Insert Lock Pin (H). When folded, bench will not
stand on its own. It has to lean against wall.

8
MAINTENANCE INSTRUCTION
IMPORTANT:
Safe and effective use can only be achieved if the equipment is assembled,
maintained and used properly. It is your responsibility to ensure that the equipment is
maintained regularly. Any components found to be worn and/or damaged should be
replaced before continuing use of the equipment. Equipment should only be used
and stored indoors, prolonged exposure to weathering and changes in temperature
and humidity may have a severe impact on moving parts of the machine.
Daily Maintenance:
Clean and remove sweat and moisture after each use.
Perform inspection of all nuts and bolts associated with moving parts of the
equipment, tighten as required.
Check the mobility of moving parts and components on the equipment, lubricateif
required.
Clean plastic parts of the equipment using a damp cloth, clean metal parts of the
equipment using a dry cloth. Do not use cleaning products to clean theequipment.
Weekly Maintenance:
Thoroughly inspect the parts of the equipment; nuts, bolts, hex bolts and moving
parts such as the slide collar, seat/back pad, support bar, etc. Tighten or replace
parts as required.
Monthly Maintenance:
Inspect the frame and inner working components for wear and tear as well as
damage, maintenance or replace as required.
Version 1.4

9