Sunny Health & Fitness SF-RW5941 User manual

MULTIFUNCTION SPM MAGNETIC
ROWING MACHINE
SF-RW5941
USER MANUAL
IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your
satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED
US: [e-mail] or 1- 877 - 90SUNNY (877-907-8669).

1
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using the
equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained,
and used properly. It is your responsibility to ensure that all users of the equipment are informed of
all warnings and precautions.
1. Before starting any exercise program, you should consult your physician to determine if you
have any medical or physical conditions that could put your health and safety at risk or prevent
you from using the equipment properly. Your physician’s advice is essential if you are taking
medication that affects your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest,
irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If
you do experience any of these conditions, you should consult your physician before continuing
with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of
the equipment can only be maintained if it is regularly examined for damage and/or wear and
tear.
6. Always use the equipment as indicated. If you find any defective components while assembling
or checking the equipment, or if you hear any unusual noises coming from the equipment during
exercise, discontinue use of the equipment immediately and do not use until the problem has
been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may
become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 285 pounds (130 KG).
10. The equipment is not suitable for therapeutic use.
11. To avoid bodily injury and/or damage to the product or property, proper lifting and moving are
required.
12. Your product is intended for use in cool and dry conditions. You should avoid storage in
extreme cold, hot or damp areas as this may lead to corrosion and other related problems.
13. This equipment is designed for indoor and home use only; it is not intended for commercial use.

2
EXPLODED DIAGRAM 1

3
EXPLODED DIAGRAM 2
HARDWARE PACKAGE

4
PARTS LIST
No. Description Spec. Qty. No. Description Spec. Qty.
1 Main Frame 1 33L/R Pedal L/R 2
2 Sliding Rail 1 34 Pedal Strap 2
3 Front Stabilizer 1 35 Screw M8*15 2
4 Rear Stabilizer 1 36 Left End Cap 1
5 Handlebar 1 37 Right End Cap 1
6 Seat 1 38 Screw ST4.2*20 8
7 Washer φ8*φ16*1.5 15 39 End Cap 1
8 Spring Washer φ8 4 40 Round End Cap 2
9 Bolt M8*20 4 41 Foam Grip φ27*φ33*214 2
10 Right Seat
Supporting Board
1 42 Nut M10*1.0*9 4
11 Left Seat
Supporting Board
1 43 Nut M10*1*B5 4
12 U Shape Bracket 2 44 Inertial Wheel 1
13 Bolt M8*125 3 45 Bolt M6*12 4
14 Spacer φ15*φ8*4 6 46 Washer φ12*φ6.5*1.5 6
15 Bearing 608 6 47 Shaft Snap Ring φ10*1.0 4
16 Wheel φ39*92 3 48 Belt Pulley Shaft φ10*87*M6 2
17 Casing Pipe for
Idler Wheel φ12*φ9*78 3
49 Bearing 6000 4
18 Nut M8 4 50 Mesh Belt Pulley φ45*35 2
19 Adjusting Screw M6*36 4 51 Washer φ14*φ10.2*0.5 2
20 U Shape Baffle 4 52 Bolt M5*10 3
21 Nut M6 6 53 Handle Guide 1
22 Screw M8*16 4 54 Sensor Wire 1
23 End Cap 2 54A Sensor Wire A 1
24 Nut M8 2 54B Sensor Wire B 1
25 Foot Pad 2 55 Volute Spring
Complete Set
1
26 Square Plug 1 56 Mesh Belt 1
27 Pull Pin φ8.0*106 1 57 Belt 220PJ 1
28 Bolt M8*102 1 58 Tension Control
Knob
1
29 Limit Mat φ22*16 1 59 Washer φ5 1
30 Screw M6*20 1 60 Screw M5*12 1
31 Knob M16*1.5*43.5 1 61 Left Cover 1
32 Bolt M12*160 4 62 Right Cover 1

5
No. Description Spec. Qty No. Description Spec. Qty
63 Water Bottle Holder 1 71 Battery 2
64 Screw ST4.2*15 1 72 Bolt M5*15 2
65 Clip 2 73 Spanner S10, 13, 14, 15 1
66 Left Foot Pad 1 74 Spanner S10, 13, 17, 19 1
67 Right Foot Pad 1 75 Allen Wrench S6 1
68 Screw ST4.2*25 7 76 Bolt M6*15 2
69 Cover Fixed Column 1 77 Left Anti-slip Mat 2
70 Computer 1 78 Right Anti-slip Mat 2
70A Computer Wire A 1 79 Bottom Fixed Plate 1
70B Computer Wire B 1
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify the part(s) needed:
 The model number (found on cover of manual)
 The product name (found on cover of manual)
 The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the front
of the manual)
Please contact us at [e-mail] or 1- 877 - 90SUNNY (877-907-8669).

6
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts
or troubleshooting, please contact us at [e-mail] or 1-877-90SUNNY
(877-907-8669).
STEP 1:
Attach the Front Stabilizer (No.
3) to the Main Frame (No. 1)
using 2 Screws (No. 35) and 2
Washers (No. 7). Tighten and
secure with Allen Wrench (No.
75).
Open the Left & Right Foot
Pads (No. 66 & No. 67) as
indicated by the arrow.
STEP 2:
Insert 2 Bolts (No. 32) through
the Pedals L/R (No. 33L/R) into
the upper hole at position A of the
Main Frame (No. 1). Tighten with
Spanner (No. 74).
Insert 2 Bolts (No. 32) into the
bottom hole at position B of the
Main Frame (No. 1). Tighten with
Spanner (No. 74).
NOTE: The Pedals L/R (No.
33L/R) should rest on the bottom
Bolts (No. 32) at position B.

7
We value your experience using Sunny Health and Fitness products. For assistance with parts
or troubleshooting, please contact us at [e-mail] or 1-877-90SUNNY
(877-907-8669).
STEP 4:
Attach the Rear Stabilizer (No. 4)
to the Sliding Rail (No. 2) using 4
Screws (No. 22) and 4 Washers
(No. 7). Tighten and secure with
Allen Wrench (No. 75).
STEP 3:
Slide the Seat (No. 6) into the
Sliding Rail (No. 2).
STEP 5:
Attach the Sliding Rail (No. 2) to
the Main Frame (No. 1) with 1
Bolt (No. 28), 2 Washers (No. 7)
and 1 Nut (No. 18). Tighten and
secure with Allen Wrench (No.
75) and Spanner (No. 73).
Then screw Knob (No. 31) to
tighten the Sliding Rail (No. 2).
Next insert the Pull Pin (No. 27).
The assembly is complete!

8
ADJUSTMENTS & USAGE GUIDE
CAUTION! Moving parts, such as the seat, can cut and crush. Keep hands clear of the sliding
rail during use!
PEDAL STRAP ADJUSTMENT
The pedal strap is adjustable and can be
personalized to fit the user’s foot size.
MOVING THE ROWER
To move the rower, lift the Rear Stabilizer (No. 4)
up until the transportation wheels on the Front
Stabilizer (No. 3) touch the ground. With the
wheels on the ground, you can transport the rower
to the desired location with ease.
ADJUSTING THE BALANCE AND RESISTANCE
Adjust the Foot Pads (No. 25) on the Rear
Stabilizer (No. 4) of the rower if the rower is
unbalanced during use.
Turn the Tension Control Knob (No. 58) clockwise
to increase the level of resistance.
Turn the Tension Control Knob (No. 58)
counter-clockwise to decrease the level of
resistance.
Tension levels are set at Level 1 being the lowest
and Level 16 being the highest.
4

9
BATTERY INSTALLATION & REPLACEMENT
BATTERY INSTALLATION:
1. Press the buckle on the bottom of Computer (No. 70), then remove Computer (No. 70) from
Main Frame (No. 1). Disconnect the Sensor Wires A & B (No. 54A & No. 54B) and the
Computer Wires A & B (No. 70A & No. 70B), then open the velcro above the battery case on
the back of the Computer (No. 70).
2. Take out 2pcs AAA batteries from the manual bag. Install the 2pcs AAA batteries into the battery
case on the back of the Computer (No. 70), then cover with the velcro. Connect the Sensor
Wire A (No. 54A) with Computer Wire B (No. 70B), and connect Sensor Wire B (No. 54B)
with Computer Wire A (No. 70A). Press the buckle on the bottom of Computer (No. 70) and
put the Computer (No. 70) back onto the Main Frame (No. 1). Pay attention to the battery +
and – poles before installing.
The installation is complete!
BATTERY REPLACEMENT:
1. Press the buckle on the bottom of Computer (No. 70), then remove Computer (No. 70) from
Main Frame (No. 1). Disconnect the Sensor Wires A & B (No. 54A & No. 54B) and the
Computer Wires A & B (No. 70A & No. 70B), then open the velcro above the battery case on
the back of the Computer (No. 70).
2. Take out the 2pcs old AAA batteries from the battery case and install 2pcs new AAA batteries
into the battery case on the back of the Computer (No. 70), then cover with the velcro. Connect
the Sensor Wire A (No. 54A) with Computer Wire B (No. 70B), and connect Sensor Wire B
(No. 54B) with Computer Wire A (No. 70A). Press the buckle on the bottom of Computer (No.
70) and put the Computer (No. 70) back onto the Main Frame (No. 1). Pay attention to the
battery + and – poles before installing.
The replacement is complete!
NOTE: Always change both batteries at the same time. Do not mix battery types and do not mix
old and new batteries. Dispose batteries according to your state and regional guidelines.
1