Sunny Health & Fitness SF-RB4708 User manual

CROSS TRAINING MAGNETIC
RECUMBENT BIKE
SF-RB4708
USER MANUAL
IMPORTANT! Read all instructions carefully before using this product. Retain owner’s manual
for future reference. For customer service, please contact: [e-mail]

IMPORTANT SAFETY NOTICE
Note the following precaution before assembling and operating the machine.
1. Assemble the machine exactly as described in the instruction manual.
2. Check all the bolts, nuts and other connections before using the machine for the first time to
ensure the machine is in the safe condition.
3. Set up the machine in a dry level place and keep it away from moisture and water.
4. Place a suitable base (e.g. rubber mat, wooden board etc.) beneath the machine in the area of
assembly to avoid dirt.
5. Before beginning exercise, remove all objects within a radius of 4 feet from the machine.
6. Do not use aggressive cleaning articles to clean the machine. Only use the supplied tools or
suitable tools of your own to assemble the machine or repair any parts of machine. Remove drops
of sweat from the machine immediately after finishing training.
7. Your health can be affected by incorrect or excessive training. Consult a doctor before
beginning the training program. This machine is not suitable for therapeutic purpose.
8. Only use the elliptical when it is working correctly. Use only original spare parts for any
necessary repairs.
9. This machine can be used by one person at a time.
10. Wear training clothes and shoes that are suitable for fitness training with the machine. Do not
wear clothing that could get tangled in the machine.
11. If you have a feeling of dizziness, sickness or other abnormal symptoms, please stop training
and consult a doctor immediately.
12. This elliptical is intended for adult use only. Keep children away from the elliptical.
13.Do not put fingers or objects in the moving parts of the machine.
14．Maximum user’s weight is 350 LBS.
WARNING: This product can expose you to one or more chemicals known to the State of
California to cause cancer and birth defects or reproductive harm. For more information
go to www.P65Warnings.ca.gov.
1

EXPLODED DIAGRAM
2

HARDWARE DRAWING & TOOLS
Most of the listed assembly hardware have been packaged separately, but some hardware parts have been
preassembled. In these instances, simply remove and reinstall the hardware as required.
3

PARTS LIST
NO.
DESCRIPTION
QTY
NO.
DESCRIPTION
QTY
1
Main frame
1
37
Back rest
1
2
Seat tube
1
38
Cross pan head screw
4
3L/R
Swing tube
1.pr
39
Flat washer D13*2*Ф26
2
4
Slide rail
1
40L/R
Crank
1.pr
5L/R
Handlebar
1.pr
41
Cap S14
2
6
Front stabilizer
1
42
Cap S13
2
7
Rear stabilizer
1
43
Sensor wire
1
8
Adjustment Handle
1
44
Hex bolt M8*50
2
9
Square neck bolt
M8*L73*120*□8
4
45
Square plug 60*30*1.5
1
10
Connecting board
2
46
Cross pan head screw
ST4.2*18
4
11
Ball cap nut M8
8
47
Alloy bushing 1
2
12
Arc washer Ф8.2*2*Ф19*R30
4
48
Nylon nut M8
2
13
Computer tube
4
49
Extension wire 1
2
14
Hex pan head screw M8*16
14
50
Hex pan head screw M8*20
2
15
Washer D8*1.5*Ф16
16
51
Spring washer
2
16
Spring stop collar D12
1
52
Flat washer D8*Ф30*2
2
17
Spring stop collar D10
1
53
Axle glove
6
18
Eccentric gear
1
54
Wave washer
2
19
Axle
1
55
Plug
4
20
Small alloy bushing
1
56
Plug
1
21
Big alloy bushing
1
57
Long axle
1
22
Hex socket cap screw M6*10
4
58
Square bolt M8*40
4
23
Located handlebar glove
1
59
Arc washer Ф20*d8.5dR12.5
4
24
Simple bearing
2
60
Pulse wire
2
25
End cap
2
61
Foam grip
2
26
End cap
2
62
Cross screw M6*20
4
27L/R
Pedal
1.pr
63
Fixed bracket
1
28
Adjusting pad
1
64
Hex screw M8*70
2
29
Alloy bushing 2
2
65
Extension wire 2
2
30
Spacer
2
66
Sensor wire
1
31
Computer
1
67
Nylon nut M8
1
32
Square plug
2
68
Alloy bushing
2
33
Square plug
2
69
Round end cap
1
34
Bushing
2
70
Round end cap
4
35
Block
1
71
Flat washer
4
36
Seat
1
4

ASSEMBLY INSTRUCTION
STEP 1
1. Attach the Front Stabilizer (6) and the Rear Stabilizer (7) to the Main Frame (1) with the
Square Neck Bolts (9), Arc Washers (12) and Ball Cap Nuts (11).
2. Attach the Adjustable Pad (28) to the Main Frame (1).
STEP 2
1. Attach the Slide Rail (4) to the Main Frame (1) with Hex Pan Head Screws (14), Washers
(15).
2. Attach the Adjustment Handle (8) to the Axle (19), and lock them with Hex Socket Cap
Screws (22).
5

STEP 3
1. Attach the Seat Rest (37) to the Seat Tube (2) with Hex Pan Head Screws (14) and Washers
(15).
2. Attach the Seat (36) to the Seat Tube (2) with Hex Pan Head Screws (14) and Washers (15).
STEP 4
1. Attach the Swing Tube (3L/R) to the Main Frame (1) with Hex Pan Head Screws (50), Spring
Washers (51), Flat Washers (52), Wave Washers (54) and Long Axle (57).
2. Attach the Connecting Board (10) to the Crank (40L/R) with Pedal (27L/R), Simple Bearings
(24), Alloy Bushings 2 (29), Spacers (30) and Flat Washers (39).
NOTE: Make sure to attach Right Pedal, marked (R), to the Right Crank (R). It should be
tightened clockwise. Attach the Left Pedal, marked (L), to the Left Crank (L). It should be
tightened counterclockwise. Attaching the Pedal to the wrong Crank or turning it the wrong
direction will damage the Crank.
6

STEP 5
1. Attach the Handlebar (5L/R) to the Swing Tube (3L/R) with Square Bolts (58), Arc Washers
(59) and Ball Cap Nuts (11). Connect the Pulse Wire (60) with Extension Wire (49).
2. Lift up the Computer Tube (13), and lock the Hex Screw (64) to the Fixed bracket (63) by the
bottom holes of the Computer Tube (13).
3. Connect the Extension Wire (65), Sensor Wire (66) with the wires of the Computer (31).
Lock the Computer (31) to the Computer Tube (13) with Cross Pan Head Screws (38) and
Flat Washers (71).
Assembly is now complete!
7

Adjusting the Saddle Position
To move the saddle forward or backward, while seated on the bike, pull the Adjustment Handle
(8) towards you. Move the saddle. Push the Adjustment Handle (8) forward to secure.
Adjusting the Level
If the bike is not level, adjust the End Caps (26).
8

Moving the Bike
Lift the bike by the Rear Stabilizer (7) until the wheels on the Front Stabilizer (6) touch the floor.
Now you can move the bike.
9