Sunnydaze Decor BWD-917 User manual

Page 1 / 3BW21-08B
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
COUNTER-HEIGHT BENCH
BWD-917
Carefully read all assembly and information in this manual before using this product. Save this manual for future reference.

(not included)
Phillips Screwdriver
  
ASeat 1
BLeg Panel (L/R) 2
CStretcher 2
1JCBC M6x50mm Bolt 8
2CSK M4x32mm Screw 2
3Split Washer 8
48x30mm Wood Dowel 8
5Hex Key 1
HELPFUL HINT
Sunnydaze Decor advises reading this manual
fully, and assembling the item soon after
purchase. Check that all parts are accounted for
and familiarize yourself with the assembly before
beginning.
 — This item contains small parts
that can be swallowed. Keep children and pets away
during assembly.
WARNING
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
NOTE: Over time and with use, bolts may become loose.
Save the included tool for tightening loosened hardware.
04/2022

Page 2 / 3BW21-08B
ASSEMBLY
Review all steps and understand assembly before beginning.
Do not fully tighten hardware until all frame components have been loosely assembled.
STEP 1
B: 2
C: 2
1: 4
3: 4
4: 4
STEP 2
1: 4
3: 4
2: 2A: 1
4: 4
• Firmly insert one
Dowel (4) into the top
mounting hole on both
ends of both Stretchers
(C) as shown.
• Align the stretchers
with one of the Leg
Panels (B) and loosely
securing using Split
Washers (3) and
M6x50mm Bolts (1).
Repeat to secure the
remaining leg panel.
IMPORTANT: Do not install
wood dowels into mounting holes
with threaded inserts.
Do not fully tighten hardware until
after Step 2 is complete.
2.1
• Identify the support beams that are attached
to the bottom of Seat (A) and firmly insert one
Dowel (4) into each of the top mounting hole on
each beam as shown.
2.2
• Align the seat with the top of the leg panels.
• Secure the leg panels to the support beams using
two sets of Split Washers (3) and M6x50mm Bolts
(1) as shown. Repeat to secure the opposite side.
2.3
• Use one M4x32mm Screw (2) to secure the
underside of each leg panel to the seat as shown.
04/2022

SAFE USE: Follow all safety statements and warnings. For residential use only. Only use on a at, level surface. Do not
stand on any part of the bench. Do not exceed the weight capacity.
INSPECT: Before use, ensure the unit is assembled correctly and all hardware is securely tightened. If parts are missing,
broken, damaged, or worn out, do not use this product.
All fabrics will eventually fade from sun exposure. Maintain cushion color and integrity by keeping the
unit out of direct sunlight.
CLEAN: Use a soft cloth and clean, warm water to spot-clean the cushion. Use a slightly damp cloth to hand-wash the
chair. Do not use chemicals or abrasive materials to clean any part of the unit.
Care & Maintenance
Page 3 / 3BW21-08B
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
Cleaning
Do not use bleach, harsh chemicals, or abrasive materials to clean the furniture.
SEAT CUSHION
• Frequently brush or vacuum the cushion to prevent dust and dirt from getting deep into the fabric.
• Spot clean the cushion using a soft cloth and lukewarm water. For more stubborn stains, gently scrub using mild soap
and lukewarm water. Press a dry towel on the spot-cleaned area to absorb excess moisture. Allow to thoroughly dry
before use.

• Use a dry, soft cloth or a clean feather duster to remove dust. For more stubborn stains, gently scrub wooden surfaces
using a slightly damp cloth.
SAFETY STATEMENTS & WARNINGS

• For indoor use only.
• This product is for residential use only; institutional or commercial use will automatically void the product warranty.
• Ensure fittings are tight before use. Periodically check fitting to ensure they are tight.
• Do not stand on any part of this unit.
• Do not exceed the weight capacity of the furniture.
• Do not place liquids or hot items directly on the furniture.
• Never use chemical cleaning products or polishes as they may damage the finish.
• Avoid long-term exposure to sunlight.
• Avoid placing near heating or cooling vents as forced air is be very drying and could damage the wood.
04/2022